The physical layer (layer 1) clocking mode.
When configured as AUTO the clock provided depends what is
configured on connector. If connector is configured as
DTE clock must provided from external, if the connector is
configured as DCE clock is generated and is provided at
the output pins.
It is possible to configure the clock independed from
connector type. EXTERNAL clock means the clock must provided
by the external device and INTERNAL clock means the clock
is generated by the brick and is provided on the output pins.
X.21 one clock line is provided.
V.35/V.36 two clock lines are provided.
auto(1) connector = DTE = extern,
DCE = intern
extern(2) clock pins operate as input.
intern(3) clock pins operate as output.
Parsed from file mibserial.mib.txt
Company: None
Module: BIANCA-BRICK-SERIAL-MIB
The physical layer (layer 1) clocking mode.
When configured as AUTO the clock provided depends what is
configured on connector. If connector is configured as
DTE clock must provided from external, if the connector is
configured as DCE clock is generated and is provided at
the output pins.
It is possible to configure the clock independed from
connector type. EXTERNAL clock means the clock must provided
by the external device and INTERNAL clock means the clock
is generated by the brick and is provided on the output pins.
X.21 on clock line is provided.
V.35/V.36 two clock lines are provided.
auto(1) connector = DTE = extern,
DCE = intern
extern(2) clock pins operate as input.
intern(3) clock pins operate as output.
Parsed from file BIANCA-BRICK-SERIAL-MIB.mib
Module: BIANCA-BRICK-SERIAL-MIB
Vendor: BinTec Communications GmbH
Module: BIANCA-BRICK-SERIAL-MIB
[Automatically extracted from oidview.com]
serialIfClock OBJECT-TYPE SYNTAX INTEGER { auto(1), extern(2), intern(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The physical layer (layer 1) clocking mode. When configured as AUTO the clock provided depends what is configured on connector. If connector is configured as DTE clock must provided from external, if the connector is configured as DCE clock is generated and is provided at the output pins. It is possible to configure the clock independed from connector type. EXTERNAL clock means the clock must provided by the external device and INTERNAL clock means the clock is generated by the brick and is provided on the output pins. X.21 one clock line is provided. V.35/V.36 two clock lines are provided. auto(1) connector = DTE = extern, DCE = intern extern(2) clock pins operate as input. intern(3) clock pins operate as output." ::= { serialIfEntry 5 }
serialIfClock OBJECT-TYPE SYNTAX INTEGER { auto(1), extern(2), intern(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The physical layer (layer 1) clocking mode. When configured as AUTO the clock provided depends what is configured on connector. If connector is configured as DTE clock must provided from external, if the connector is configured as DCE clock is generated and is provided at the output pins. It is possible to configure the clock independed from connector type. EXTERNAL clock means the clock must provided by the external device and INTERNAL clock means the clock is generated by the brick and is provided on the output pins. X.21 on clock line is provided. V.35/V.36 two clock lines are provided. auto(1) connector = DTE = extern, DCE = intern extern(2) clock pins operate as input. intern(3) clock pins operate as output." ::= { serialIfEntry 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.25.1.1.1 | serialIfIndex | 0 | 0 | Unique interface index of the serial interface. |
| 1.3.6.1.4.1.272.4.25.1.1.2 | serialIfType | 0 | 0 | serialIftype |
| 1.3.6.1.4.1.272.4.25.1.1.3 | serialIfConnector | 0 | 0 | The physical connector type. When configured as DCE the pins on the output connector act as a DCE interface. If configured as DTE… |
| 1.3.6.1.4.1.272.4.25.1.1.4 | serialIfLeads | 0 | 0 | The value of IfLeads has influence on the state of the physical layer (L1State). When configured as IfLeads=enabled, the state of… |
| 1.3.6.1.4.1.272.4.25.1.1.6 | serialIfClockEdge | 0 | 0 | The value of IfClockEdge influences the (internal) active clock edge(s) for generating/sampling data on the serial line. This val… |
| 1.3.6.1.4.1.272.4.25.1.1.8 | serialIfSpeed | 0 | 0 | The serial interface speed in bits per second. The range is dependant on the type of the line (balanced/unbalanced) and the quali… |
| 1.3.6.1.4.1.272.4.25.1.1.10 | serialIfL2Mode | 0 | 0 | The layer 2 mode. This value has influence on the HDLC address field (first byte of a HDCL frame). When configured as DTE the add… |
| 1.3.6.1.4.1.272.4.25.1.1.11 | serialIfCableDetection | 0 | 0 | Cable autodetection for: manual(1) disabled auto(2) serialIfType and serialIfConnector iftype(3) serialIfType connector(… |
| 1.3.6.1.4.1.272.4.25.1.1.12 | serialIfCableType | 0 | 0 | Show the detected cable type: unknown(1) cable type unknown. x21(2) DB15, X27/V11 (sync) v35(3) … |
| 1.3.6.1.4.1.272.4.25.1.1.13 | serialIfCableConnector | 0 | 0 | Show the detected cable connector type: dte(1) DTE cable dce(2) DCE cable unknown(3) cable type unknown.… |
| 1.3.6.1.4.1.272.4.25.1.1.14 | serialIfBundle | 0 | 0 | Index of the bundle to aggregate multiple Channels to one interface. |
| 1.3.6.1.4.1.272.4.25.1.1.15 | serialIfL1State | 0 | 0 | The serial physical layer state dn(1) physical layer is inactive up(2) physical layer is active |
| 1.3.6.1.4.1.272.4.25.1.1.16 | serialIfSpeedReal | 0 | 0 | In DCE/internal clock mode this is the rounded speed in bits per second, because not every baudrate can exactly be generated. In … |
| 1.3.6.1.4.1.272.4.25.1.1.20 | serialIfRxPackets | 0 | 0 | Count of received valid Frames. |
| 1.3.6.1.4.1.272.4.25.1.1.21 | serialIfRxOctets | 0 | 0 | Count of received bytes. |
| 1.3.6.1.4.1.272.4.25.1.1.22 | serialIfTxPackets | 0 | 0 | serialIftxPackets |
| 1.3.6.1.4.1.272.4.25.1.1.23 | serialIfTxOctets | 0 | 0 | serialIftxOctets |
| 1.3.6.1.4.1.272.4.25.1.1.24 | serialIfRxResets | 0 | 0 | Count of receiver resets. Under rare circumstances it might be necessary to reset the receiver to work properly. |
| 1.3.6.1.4.1.272.4.25.1.1.25 | serialIfRxAborts | 0 | 0 | Count of receiver aborts. The sender of a frame can indicate a frame as aborted with a special Abort sequence. |
| 1.3.6.1.4.1.272.4.25.1.1.26 | serialIfRxOverruns | 0 | 0 | Count of receiver overruns. If the serial port is unable to grant sufficiently soon/often the bus, the RxFIFO may fill up. This l… |
| 1.3.6.1.4.1.272.4.25.1.1.27 | serialIfRxCRCErrors | 0 | 0 | Count of corrupted frames. Errors due to interference on the serial cable. |
| 1.3.6.1.4.1.272.4.25.1.1.28 | serialIfRxGiantFrames | 0 | 0 | Count of received frames with illegal framesize. This can occur if a frame delimiter is destroyed. |
| 1.3.6.1.4.1.272.4.25.1.1.29 | serialIfTxResets | 0 | 0 | serialIftxResets |
| 1.3.6.1.4.1.272.4.25.1.1.30 | serialIfTxAborts | 0 | 0 | serialIftxAborts |
| 1.3.6.1.4.1.272.4.25.1.1.31 | serialIfTxUnderruns | 0 | 0 | serialIftxUnderruns |
| 1.3.6.1.4.1.272.4.25.1.1.32 | serialIfTxGiantFrames | 0 | 0 | serialIftxGiantFrames |