The maximum allowable packet size for this link during
X.25 packet size negotiation. If this field is set to
unrestricted, the packet size will only be limited by
the Mtu size of the interface, which is always the
upper bound for the packet size.
Parsed from file mibx25.mib.txt
Company: None
Module: BIANCA-BRICK-X25-MIB
The maximum allowable packet size for this link during
X.25 packet size negotiation. If this field is set to
unrestricted, the packet size will only be limited by
the Mtu size of the interface, which is always the
upper bound for the packet size.
Parsed from file BIANCA-BRICK-X25-MIB.mib
Module: BIANCA-BRICK-X25-MIB
Vendor: BinTec Communications GmbH
Module: BIANCA-BRICK-X25-MIB
[Automatically extracted from oidview.com]
x25LkPrMaxPktSize OBJECT-TYPE SYNTAX INTEGER { unrestricted(1), p128(7), p256(8), p512(9), p1024(10), p2048(11), p4096(12) } ACCESS read-write STATUS mandatory DESCRIPTION "The maximum allowable packet size for this link during X.25 packet size negotiation. If this field is set to unrestricted, the packet size will only be limited by the Mtu size of the interface, which is always the upper bound for the packet size." ::= { x25LinkPresetEntry 13 }
x25LkPrMaxPktSize OBJECT-TYPE SYNTAX INTEGER { unrestricted(1), p128(7), p256(8), p512(9), p1024(10), p2048(11), p4096(12) } ACCESS read-write STATUS mandatory DESCRIPTION "The maximum allowable packet size for this link during X.25 packet size negotiation. If this field is set to unrestricted, the packet size will only be limited by the Mtu size of the interface, which is always the upper bound for the packet size." ::= { x25LinkPresetEntry 13 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.6.2.1.1 | x25LkPrIfIndex | 0 | 0 | The interface index of the link to be predefined. This object identifies a row in the ifTable. |
| 1.3.6.1.4.1.272.4.6.2.1.2 | x25LkPrAddr | 0 | 0 | On point-to-point links, this field must be empty. On point-to-multipoint links, this field may be empty or set to a partners (MA… |
| 1.3.6.1.4.1.272.4.6.2.1.3 | x25LkPrMode | 0 | 0 | This field indicates, whether the link is initially operated in DTE or DCE mode. If a misconfiguration is detected, (DTE<->DTE od DC… |
| 1.3.6.1.4.1.272.4.6.2.1.4 | x25LkPrModulo | 0 | 0 | This object indicates, whether the link should be operated in modulo 8 or modulo 128 mode. |
| 1.3.6.1.4.1.272.4.6.2.1.5 | x25LkPrLIC | 0 | 0 | Lowest Incoming Channel as seen from the DTE. Zero means no incoming channels. |
| 1.3.6.1.4.1.272.4.6.2.1.6 | x25LkPrHIC | 0 | 0 | Highest Incoming Channel as seen from the DTE. Zero means no incoming channels. |
| 1.3.6.1.4.1.272.4.6.2.1.7 | x25LkPrLTC | 0 | 0 | Lowest Twoway Channel as seen from the DTE. Zero means no twoway channels. |
| 1.3.6.1.4.1.272.4.6.2.1.8 | x25LkPrHTC | 0 | 0 | Highest Twoway Channel as seen from the DTE. Zero means no twoway channels. |
| 1.3.6.1.4.1.272.4.6.2.1.9 | x25LkPrLOC | 0 | 0 | Lowest Outgoing Channel as seen from the DTE. Zero means no outgoing channels. |
| 1.3.6.1.4.1.272.4.6.2.1.10 | x25LkPrHOC | 0 | 0 | Highest Outgoing Channel as seen from the DTE. Zero means no outgoing channels. |
| 1.3.6.1.4.1.272.4.6.2.1.11 | x25LkPrDefPktSize | 0 | 0 | The Layer 3 packet size for this link. |
| 1.3.6.1.4.1.272.4.6.2.1.12 | x25LkPrDefWinSize | 0 | 0 | The default window size. This must be less than 8, if the layer 3 is operated in modulo 8 mode. |
| 1.3.6.1.4.1.272.4.6.2.1.14 | x25LkPrMaxWinSize | 0 | 0 | The maximum allowable window size for this link during window size negotiation. |
| 1.3.6.1.4.1.272.4.6.2.1.15 | x25LkPrL2WinSize | 0 | 0 | The layer 2 window size for this link. |
| 1.3.6.1.4.1.272.4.6.2.1.16 | x25LkPrL2RetrTimer | 0 | 0 | The retransmission timeout in milliseconds for the layer 2 of this link. If a frame is not acknowledged within this timeout, it w… |
| 1.3.6.1.4.1.272.4.6.2.1.17 | x25LkPrL2RetrCounter | 0 | 0 | The retransmission counter for the layer 2 of this link. If a frame has been retransmitted more often than indicated by this obje… |
| 1.3.6.1.4.1.272.4.6.2.1.18 | x25LkPrL2SupervTimer | 0 | 0 | The link-supervision timeout in milliseconds for the layer 2 of this link. This timer is started, when the link gets idle. An RR … |
| 1.3.6.1.4.1.272.4.6.2.1.19 | x25LkPrL2IdleTimer | 0 | 0 | The idle timer in milliseconds for the layer 2 of this link. If no VCs are established and the the link has been idle for the tim… |
| 1.3.6.1.4.1.272.4.6.2.1.20 | x25LkPrNegotiation | 0 | 0 | This object determines whether packet-size and windows-size parameters are negotiated for outgoing calls. When set to never, out… |
| 1.3.6.1.4.1.272.4.6.2.1.21 | x25LkPrDiscDelayTimer | 0 | 0 | The disc delay timer in milliseconds for the layer 2 of this link (only outgoing links). This timer specifies the time interval b… |
| 1.3.6.1.4.1.272.4.6.2.1.22 | x25LkPrCallDelayTimer | 0 | 0 | The call delay timer in milliseconds for the layer 3 of this link (only outgoing link). This timer specifies the time interval be… |
| 1.3.6.1.4.1.272.4.6.2.1.23 | x25LkPrRestDelayTimer | 0 | 0 | The Restart delay timer in milliseconds for this link. This timer specifies the time interval between establishment of layer 2 an… |
| 1.3.6.1.4.1.272.4.6.2.1.24 | x25LkPrVC0 | 0 | 0 | This object indicates, whether VC#0 shall be allowed on the link. If this object is set to enable, VC#0 is allowed and the value … |
| 1.3.6.1.4.1.272.4.6.2.1.25 | x25LkPrRewritingRule | 0 | 0 | This Object specifies a rewriting rule in the X25 Rewrite table. The call packet will be processed according to this rewriting ru… |
| 1.3.6.1.4.1.272.4.6.2.1.26 | x25LkPrL1IdleTimer | 0 | 0 | None |
| 1.3.6.1.4.1.272.4.6.2.1.32 | x25LkPrActSabmDelayTimer | 0 | 0 | None |
| 1.3.6.1.4.1.272.4.6.2.1.33 | x25LkPrPsvSabmDelayTimer | 0 | 0 | None |