The layer 2 window size for this link.
Parsed from file mibx25.mib.txt
Company: None
Module: BIANCA-BRICK-X25-MIB
The layer 2 window size for this link.
Parsed from file BIANCA-BRICK-X25-MIB.mib
Module: BIANCA-BRICK-X25-MIB
Vendor: BinTec Communications GmbH
Module: BIANCA-BRICK-X25-MIB
[Automatically extracted from oidview.com]
x25LkPrL2WinSize OBJECT-TYPE SYNTAX INTEGER (1..127) ACCESS read-write STATUS mandatory DESCRIPTION "The layer 2 window size for this link." ::= { x25LinkPresetEntry 15 }
x25LkPrL2WinSize OBJECT-TYPE SYNTAX INTEGER (1..127) ACCESS read-write STATUS mandatory DESCRIPTION "The layer 2 window size for this link." ::= { x25LinkPresetEntry 15 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.272.4.6.2.1.1 | x25LkPrIfIndex | 0 | 0 | The interface index of the link to be predefined. This object identifies a row in the ifTable. |
1.3.6.1.4.1.272.4.6.2.1.2 | x25LkPrAddr | 0 | 0 | On point-to-point links, this field must be empty. On point-to-multipoint links, this field may be empty or set to a partners (MA… |
1.3.6.1.4.1.272.4.6.2.1.3 | x25LkPrMode | 0 | 0 | This field indicates, whether the link is initially operated in DTE or DCE mode. If a misconfiguration is detected, (DTE<->DTE od DC…-> |
1.3.6.1.4.1.272.4.6.2.1.4 | x25LkPrModulo | 0 | 0 | This object indicates, whether the link should be operated in modulo 8 or modulo 128 mode. |
1.3.6.1.4.1.272.4.6.2.1.5 | x25LkPrLIC | 0 | 0 | Lowest Incoming Channel as seen from the DTE. Zero means no incoming channels. |
1.3.6.1.4.1.272.4.6.2.1.6 | x25LkPrHIC | 0 | 0 | Highest Incoming Channel as seen from the DTE. Zero means no incoming channels. |
1.3.6.1.4.1.272.4.6.2.1.7 | x25LkPrLTC | 0 | 0 | Lowest Twoway Channel as seen from the DTE. Zero means no twoway channels. |
1.3.6.1.4.1.272.4.6.2.1.8 | x25LkPrHTC | 0 | 0 | Highest Twoway Channel as seen from the DTE. Zero means no twoway channels. |
1.3.6.1.4.1.272.4.6.2.1.9 | x25LkPrLOC | 0 | 0 | Lowest Outgoing Channel as seen from the DTE. Zero means no outgoing channels. |
1.3.6.1.4.1.272.4.6.2.1.10 | x25LkPrHOC | 0 | 0 | Highest Outgoing Channel as seen from the DTE. Zero means no outgoing channels. |
1.3.6.1.4.1.272.4.6.2.1.11 | x25LkPrDefPktSize | 0 | 0 | The Layer 3 packet size for this link. |
1.3.6.1.4.1.272.4.6.2.1.12 | x25LkPrDefWinSize | 0 | 0 | The default window size. This must be less than 8, if the layer 3 is operated in modulo 8 mode. |
1.3.6.1.4.1.272.4.6.2.1.13 | x25LkPrMaxPktSize | 0 | 0 | The maximum allowable packet size for this link during X.25 packet size negotiation. If this field is set to unrestricted, the pa… |
1.3.6.1.4.1.272.4.6.2.1.14 | x25LkPrMaxWinSize | 0 | 0 | The maximum allowable window size for this link during window size negotiation. |
1.3.6.1.4.1.272.4.6.2.1.16 | x25LkPrL2RetrTimer | 0 | 0 | The retransmission timeout in milliseconds for the layer 2 of this link. If a frame is not acknowledged within this timeout, it w… |
1.3.6.1.4.1.272.4.6.2.1.17 | x25LkPrL2RetrCounter | 0 | 0 | The retransmission counter for the layer 2 of this link. If a frame has been retransmitted more often than indicated by this obje… |
1.3.6.1.4.1.272.4.6.2.1.18 | x25LkPrL2SupervTimer | 0 | 0 | The link-supervision timeout in milliseconds for the layer 2 of this link. This timer is started, when the link gets idle. An RR … |
1.3.6.1.4.1.272.4.6.2.1.19 | x25LkPrL2IdleTimer | 0 | 0 | The idle timer in milliseconds for the layer 2 of this link. If no VCs are established and the the link has been idle for the tim… |
1.3.6.1.4.1.272.4.6.2.1.20 | x25LkPrNegotiation | 0 | 0 | This object determines whether packet-size and windows-size parameters are negotiated for outgoing calls. When set to never, out… |
1.3.6.1.4.1.272.4.6.2.1.21 | x25LkPrDiscDelayTimer | 0 | 0 | The disc delay timer in milliseconds for the layer 2 of this link (only outgoing links). This timer specifies the time interval b… |
1.3.6.1.4.1.272.4.6.2.1.22 | x25LkPrCallDelayTimer | 0 | 0 | The call delay timer in milliseconds for the layer 3 of this link (only outgoing link). This timer specifies the time interval be… |
1.3.6.1.4.1.272.4.6.2.1.23 | x25LkPrRestDelayTimer | 0 | 0 | The Restart delay timer in milliseconds for this link. This timer specifies the time interval between establishment of layer 2 an… |
1.3.6.1.4.1.272.4.6.2.1.24 | x25LkPrVC0 | 0 | 0 | This object indicates, whether VC#0 shall be allowed on the link. If this object is set to enable, VC#0 is allowed and the value … |
1.3.6.1.4.1.272.4.6.2.1.25 | x25LkPrRewritingRule | 0 | 0 | This Object specifies a rewriting rule in the X25 Rewrite table. The call packet will be processed according to this rewriting ru… |
1.3.6.1.4.1.272.4.6.2.1.26 | x25LkPrL1IdleTimer | 0 | 0 | None |
1.3.6.1.4.1.272.4.6.2.1.32 | x25LkPrActSabmDelayTimer | 0 | 0 | None |
1.3.6.1.4.1.272.4.6.2.1.33 | x25LkPrPsvSabmDelayTimer | 0 | 0 | None |