This Object specifies a rewriting rule in the X25 Rewrite
table. The call packet will be processed according
to this rewriting rule before the call is being routed.
If this value is set to zero, no rewriting will take
place.
Parsed from file mibx25.mib.txt
Company: bintec
Module: BIANCA-BRICK-X25-MIB
Vendor: Bintec
Module: BIANCA-BRICK-X25-MIB (mibx25.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
(
0..999999 )
Automatically extracted from www.mibdepot.com
x25LkPrRewritingRule OBJECT-TYPE SYNTAX INTEGER (0..999999) ACCESS read-write STATUS mandatory DESCRIPTION "This Object specifies a rewriting rule in the X25 Rewrite table. The call packet will be processed according to this rewriting rule before the call is being routed. If this value is set to zero, no rewriting will take place." ::= { x25LinkPresetEntry 25 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.6.2.1.1 | x25LkPrIfIndex | 0 | 0 | The interface index of the link to be predefined. This object identifies a row in the ifTable. |
| 1.3.6.1.4.1.272.4.6.2.1.2 | x25LkPrAddr | 0 | 0 | On point-to-point links, this field must be empty. On point-to-multipoint links, this field may be empty or set to a partners (MA… |
| 1.3.6.1.4.1.272.4.6.2.1.3 | x25LkPrMode | 0 | 0 | This field indicates, whether the link is initially operated in DTE or DCE mode. If a misconfiguration is detected, (DTE<->DTE od DC… |
| 1.3.6.1.4.1.272.4.6.2.1.4 | x25LkPrModulo | 0 | 0 | This object indicates, whether the link should be operated in modulo 8 or modulo 128 mode. |
| 1.3.6.1.4.1.272.4.6.2.1.5 | x25LkPrLIC | 0 | 0 | Lowest Incoming Channel as seen from the DTE. Zero means no incoming channels. |
| 1.3.6.1.4.1.272.4.6.2.1.6 | x25LkPrHIC | 0 | 0 | Highest Incoming Channel as seen from the DTE. Zero means no incoming channels. |
| 1.3.6.1.4.1.272.4.6.2.1.7 | x25LkPrLTC | 0 | 0 | Lowest Twoway Channel as seen from the DTE. Zero means no twoway channels. |
| 1.3.6.1.4.1.272.4.6.2.1.8 | x25LkPrHTC | 0 | 0 | Highest Twoway Channel as seen from the DTE. Zero means no twoway channels. |
| 1.3.6.1.4.1.272.4.6.2.1.9 | x25LkPrLOC | 0 | 0 | Lowest Outgoing Channel as seen from the DTE. Zero means no outgoing channels. |
| 1.3.6.1.4.1.272.4.6.2.1.10 | x25LkPrHOC | 0 | 0 | Highest Outgoing Channel as seen from the DTE. Zero means no outgoing channels. |
| 1.3.6.1.4.1.272.4.6.2.1.11 | x25LkPrDefPktSize | 0 | 0 | The Layer 3 packet size for this link. |
| 1.3.6.1.4.1.272.4.6.2.1.12 | x25LkPrDefWinSize | 0 | 0 | The default window size. This must be less than 8, if the layer 3 is operated in modulo 8 mode. |
| 1.3.6.1.4.1.272.4.6.2.1.13 | x25LkPrMaxPktSize | 0 | 0 | The maximum allowable packet size for this link during X.25 packet size negotiation. If this field is set to unrestricted, the pa… |
| 1.3.6.1.4.1.272.4.6.2.1.14 | x25LkPrMaxWinSize | 0 | 0 | The maximum allowable window size for this link during window size negotiation. |
| 1.3.6.1.4.1.272.4.6.2.1.15 | x25LkPrL2WinSize | 0 | 0 | The layer 2 window size for this link. |
| 1.3.6.1.4.1.272.4.6.2.1.16 | x25LkPrL2RetrTimer | 0 | 0 | The retransmission timeout in milliseconds for the layer 2 of this link. If a frame is not acknowledged within this timeout, it w… |
| 1.3.6.1.4.1.272.4.6.2.1.17 | x25LkPrL2RetrCounter | 0 | 0 | The retransmission counter for the layer 2 of this link. If a frame has been retransmitted more often than indicated by this obje… |
| 1.3.6.1.4.1.272.4.6.2.1.18 | x25LkPrL2SupervTimer | 0 | 0 | The link-supervision timeout in milliseconds for the layer 2 of this link. This timer is started, when the link gets idle. An RR … |
| 1.3.6.1.4.1.272.4.6.2.1.19 | x25LkPrL2IdleTimer | 0 | 0 | The idle timer in milliseconds for the layer 2 of this link. If no VCs are established and the the link has been idle for the tim… |
| 1.3.6.1.4.1.272.4.6.2.1.20 | x25LkPrNegotiation | 0 | 0 | This object determines whether packet-size and windows-size parameters are negotiated for outgoing calls. When set to never, out… |
| 1.3.6.1.4.1.272.4.6.2.1.21 | x25LkPrDiscDelayTimer | 0 | 0 | The disc delay timer in milliseconds for the layer 2 of this link (only outgoing links). This timer specifies the time interval b… |
| 1.3.6.1.4.1.272.4.6.2.1.22 | x25LkPrCallDelayTimer | 0 | 0 | The call delay timer in milliseconds for the layer 3 of this link (only outgoing link). This timer specifies the time interval be… |
| 1.3.6.1.4.1.272.4.6.2.1.23 | x25LkPrRestDelayTimer | 0 | 0 | The Restart delay timer in milliseconds for this link. This timer specifies the time interval between establishment of layer 2 an… |
| 1.3.6.1.4.1.272.4.6.2.1.24 | x25LkPrVC0 | 0 | 0 | This object indicates, whether VC#0 shall be allowed on the link. If this object is set to enable, VC#0 is allowed and the value … |
| 1.3.6.1.4.1.272.4.6.2.1.26 | x25LkPrL1IdleTimer | 0 | 0 | None |
| 1.3.6.1.4.1.272.4.6.2.1.32 | x25LkPrActSabmDelayTimer | 0 | 0 | None |
| 1.3.6.1.4.1.272.4.6.2.1.33 | x25LkPrPsvSabmDelayTimer | 0 | 0 | None |