This object reports the number of FR PVC usage records that
were created at the end of the previous recording interval.
This counter indicates the number of PVCs for which usage
measurement was enabled during the last recording interval.
Parsed from file cascade.mib.txt
Company: cascade
Module: CASCADE-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
fracctPvcUsageRecCreated OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This object reports the number of FR PVC usage records that were created at the end of the previous recording interval. This counter indicates the number of PVCs for which usage measurement was enabled during the last recording interval." ::= { fracct 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.277.1.10.14.0 | fracctPvcUsageRecCreated | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.277.1.10.1 | fracctControl | 1 | 1 | This object defines the capability to enable or disable usage-based FR accounting at the switch level. The possible values are: di… |
| 1.3.6.1.4.1.277.1.10.2 | fracctASAddressPri | 1 | 1 | The IP Address of the primary Accounting Server that is servicing FR accounting for this switch. |
| 1.3.6.1.4.1.277.1.10.3 | fracctASAddressSec | 1 | 1 | The IP Address of the secondary Accounting Processor that is servicing FR accounting for this switch. |
| 1.3.6.1.4.1.277.1.10.4 | fracctASControl | 1 | 1 | This object controls which configured FR Accounting Accounting Server address is to be used for transferring usage data. |
| 1.3.6.1.4.1.277.1.10.5 | fracctPvcRecIntrvl | 1 | 1 | This object defines the recording interval over which PVC usage measurements are taken and transferred to the Accounting Server, … |
| 1.3.6.1.4.1.277.1.10.6 | fracctSnapshotPeriod | 1 | 1 | This object defines how often the switch snapshots the state of all FR PVCs and SVCs to stable storage. Acceptable values represe… |
| 1.3.6.1.4.1.277.1.10.7 | fracctStressTestRate | 1 | 1 | The rate (calls/sec/IOP) of simulated SVCs, for stress testing the accounting components on the IOPs and CP. This object is for i… |
| 1.3.6.1.4.1.277.1.10.8 | fracctAdminAction | 1 | 1 | This object defines a set of administrative actions that can be performed by the FR Accounting System. forceUpload - Forces an u… |
| 1.3.6.1.4.1.277.1.10.9 | fracctSwASCommsFailures | 1 | 1 | The number of times that communication from the switch to the FR Accounting Server has failed during the current day. A failure … |
| 1.3.6.1.4.1.277.1.10.10 | fracctPvcRecIntrvlStart | 1 | 1 | The start-time (GMT) of the current FR PVC recording interval. |
| 1.3.6.1.4.1.277.1.10.11 | fracctPvcRecIntrvlEnd | 1 | 1 | The end-time (GMT) of the current FR PVC recording interval. |
| 1.3.6.1.4.1.277.1.10.12 | fracctSvcUsageRecCreated | 1 | 1 | Count of the number of new FR SVCs for which usage records were created during the current rate period. |
| 1.3.6.1.4.1.277.1.10.13 | fracctSvcTotalUsageRecCreated | 1 | 1 | Count of the number of new FR SVCs for which usage records were created during the current day. |
| 1.3.6.1.4.1.277.1.10.15 | fracctUsageRecCrFailures | 1 | 1 | Total number of FR usage records that could not be created during the current day. |
| 1.3.6.1.4.1.277.1.10.16 | fracctUsageRecSent | 1 | 1 | Total number of FR usage records that have been transferred to the FR Accounting Server during the current day. |
| 1.3.6.1.4.1.277.1.10.17 | fracctAvgTransportBwUsed | 1 | 1 | This object reports the average amount of bandwidth (in bits per second) that has been used to transport FR Accounting data to th… |
| 1.3.6.1.4.1.277.1.10.18 | fracctAvgTransportBwBurst | 1 | 1 | This object reports the average transport bandwidth burst rate (in bits per second) obtained to transport FR accounting data to t… |
| 1.3.6.1.4.1.277.1.10.19 | fracctMinTransportBwBurst | 1 | 1 | This object reports the minimum transport bandwidth burst rate (in bits per second) obtained to transport FR accounting data to t… |
| 1.3.6.1.4.1.277.1.10.20 | fracctMaxTransportBwBurst | 1 | 1 | This object reports the maximum transport bandwidth burst rate (in bits per second) obtained to transport FR accounting data to t… |
| 1.3.6.1.4.1.277.1.10.21 | fracctOperState | 1 | 1 | This object corresponds to the operational state of the FR Accounting system on the switch. The possible values are: disabled - … |
| 1.3.6.1.4.1.277.1.10.22 | fracctASCommsState | 1 | 1 | This object identifies the current state of communications to the FR Accounting Server. Possible values are: red - File transfe… |
| 1.3.6.1.4.1.277.1.10.23 | fracctLastBWResetTime | 1 | 1 | The last time (GMT) that the AS Communications Bandwidth tracking statistics were reset to zero. |
| 1.3.6.1.4.1.277.1.10.24 | fracctSvcCbrCellCounting | 1 | 1 | This object is used to enable or disable CBR SVC usage data counting when CBR Recording is enabled. For Intra-network CBR SVCs, t… |
| 1.3.6.1.4.1.277.1.10.25 | fracctSvcAfrRecording | 1 | 1 | This object is used to enable or disable the recording of FR AFR SVCs. For Intra-network AFR SVCs, the switch will generate usage … |
| 1.3.6.1.4.1.277.1.10.26 | fracctSvcCfrRecording | 1 | 1 | This object is used to enable or disable the recording of FR CFR SVCs. For Intra-network CFR SVCs, the switch will generate usage … |
| 1.3.6.1.4.1.277.1.10.27 | fracctSvcUfrRecording | 1 | 1 | This object is used to enable or disable the recording of FR UFR SVCs. For Intra-network UFR SVCs, the switch will generate usage … |
| 1.3.6.1.4.1.277.1.10.28 | frmacctSvcVfrRecording | 1 | 1 | This object is used to enable or disable the recording of FR VFR SVCs. For Intra-network VFR SVCs, the switch will generate usage … |
| 1.3.6.1.4.1.277.1.10.29 | fracctLportTable | 1 | 14 | A table of lport-related FR Accounting System managable objects, indexed by logical port identifier. |
| 1.3.6.1.4.1.277.1.10.30 | fracctCktTable | 1 | 8 | A table of ckt-related FR Accounting System managable objects, indexed by source logical port id and source DLCI. |