The rate (calls/sec/IOP) of simulated SVCs, for stress
testing the accounting components on the IOPs and CP.
This object is for internal debugging purposes, and is
read-only in release versions.
Parsed from file cascade.mib.txt
Company: cascade
Module: CASCADE-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
fracctStressTestRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The rate (calls/sec/IOP) of simulated SVCs, for stress testing the accounting components on the IOPs and CP. This object is for internal debugging purposes, and is read-only in release versions." ::= { fracct 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.277.1.10.7.0 | fracctStressTestRate | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.277.1.10.1 | fracctControl | 1 | 1 | This object defines the capability to enable or disable usage-based FR accounting at the switch level. The possible values are: di… |
| 1.3.6.1.4.1.277.1.10.2 | fracctASAddressPri | 1 | 1 | The IP Address of the primary Accounting Server that is servicing FR accounting for this switch. |
| 1.3.6.1.4.1.277.1.10.3 | fracctASAddressSec | 1 | 1 | The IP Address of the secondary Accounting Processor that is servicing FR accounting for this switch. |
| 1.3.6.1.4.1.277.1.10.4 | fracctASControl | 1 | 1 | This object controls which configured FR Accounting Accounting Server address is to be used for transferring usage data. |
| 1.3.6.1.4.1.277.1.10.5 | fracctPvcRecIntrvl | 1 | 1 | This object defines the recording interval over which PVC usage measurements are taken and transferred to the Accounting Server, … |
| 1.3.6.1.4.1.277.1.10.6 | fracctSnapshotPeriod | 1 | 1 | This object defines how often the switch snapshots the state of all FR PVCs and SVCs to stable storage. Acceptable values represe… |
| 1.3.6.1.4.1.277.1.10.8 | fracctAdminAction | 1 | 1 | This object defines a set of administrative actions that can be performed by the FR Accounting System. forceUpload - Forces an u… |
| 1.3.6.1.4.1.277.1.10.9 | fracctSwASCommsFailures | 1 | 1 | The number of times that communication from the switch to the FR Accounting Server has failed during the current day. A failure … |
| 1.3.6.1.4.1.277.1.10.10 | fracctPvcRecIntrvlStart | 1 | 1 | The start-time (GMT) of the current FR PVC recording interval. |
| 1.3.6.1.4.1.277.1.10.11 | fracctPvcRecIntrvlEnd | 1 | 1 | The end-time (GMT) of the current FR PVC recording interval. |
| 1.3.6.1.4.1.277.1.10.12 | fracctSvcUsageRecCreated | 1 | 1 | Count of the number of new FR SVCs for which usage records were created during the current rate period. |
| 1.3.6.1.4.1.277.1.10.13 | fracctSvcTotalUsageRecCreated | 1 | 1 | Count of the number of new FR SVCs for which usage records were created during the current day. |
| 1.3.6.1.4.1.277.1.10.14 | fracctPvcUsageRecCreated | 1 | 1 | This object reports the number of FR PVC usage records that were created at the end of the previous recording interval. This coun… |
| 1.3.6.1.4.1.277.1.10.15 | fracctUsageRecCrFailures | 1 | 1 | Total number of FR usage records that could not be created during the current day. |
| 1.3.6.1.4.1.277.1.10.16 | fracctUsageRecSent | 1 | 1 | Total number of FR usage records that have been transferred to the FR Accounting Server during the current day. |
| 1.3.6.1.4.1.277.1.10.17 | fracctAvgTransportBwUsed | 1 | 1 | This object reports the average amount of bandwidth (in bits per second) that has been used to transport FR Accounting data to th… |
| 1.3.6.1.4.1.277.1.10.18 | fracctAvgTransportBwBurst | 1 | 1 | This object reports the average transport bandwidth burst rate (in bits per second) obtained to transport FR accounting data to t… |
| 1.3.6.1.4.1.277.1.10.19 | fracctMinTransportBwBurst | 1 | 1 | This object reports the minimum transport bandwidth burst rate (in bits per second) obtained to transport FR accounting data to t… |
| 1.3.6.1.4.1.277.1.10.20 | fracctMaxTransportBwBurst | 1 | 1 | This object reports the maximum transport bandwidth burst rate (in bits per second) obtained to transport FR accounting data to t… |
| 1.3.6.1.4.1.277.1.10.21 | fracctOperState | 1 | 1 | This object corresponds to the operational state of the FR Accounting system on the switch. The possible values are: disabled - … |
| 1.3.6.1.4.1.277.1.10.22 | fracctASCommsState | 1 | 1 | This object identifies the current state of communications to the FR Accounting Server. Possible values are: red - File transfe… |
| 1.3.6.1.4.1.277.1.10.23 | fracctLastBWResetTime | 1 | 1 | The last time (GMT) that the AS Communications Bandwidth tracking statistics were reset to zero. |
| 1.3.6.1.4.1.277.1.10.24 | fracctSvcCbrCellCounting | 1 | 1 | This object is used to enable or disable CBR SVC usage data counting when CBR Recording is enabled. For Intra-network CBR SVCs, t… |
| 1.3.6.1.4.1.277.1.10.25 | fracctSvcAfrRecording | 1 | 1 | This object is used to enable or disable the recording of FR AFR SVCs. For Intra-network AFR SVCs, the switch will generate usage … |
| 1.3.6.1.4.1.277.1.10.26 | fracctSvcCfrRecording | 1 | 1 | This object is used to enable or disable the recording of FR CFR SVCs. For Intra-network CFR SVCs, the switch will generate usage … |
| 1.3.6.1.4.1.277.1.10.27 | fracctSvcUfrRecording | 1 | 1 | This object is used to enable or disable the recording of FR UFR SVCs. For Intra-network UFR SVCs, the switch will generate usage … |
| 1.3.6.1.4.1.277.1.10.28 | frmacctSvcVfrRecording | 1 | 1 | This object is used to enable or disable the recording of FR VFR SVCs. For Intra-network VFR SVCs, the switch will generate usage … |
| 1.3.6.1.4.1.277.1.10.29 | fracctLportTable | 1 | 14 | A table of lport-related FR Accounting System managable objects, indexed by logical port identifier. |
| 1.3.6.1.4.1.277.1.10.30 | fracctCktTable | 1 | 8 | A table of ckt-related FR Accounting System managable objects, indexed by source logical port id and source DLCI. |