This object provides the Smds destination address and Smds
source address of the last Smds pdu to cause the violation
Smds Sa Da On Same Port. The first 8 bytes of the octet string
(i.e.; 16 digits in BCD format) correspond to the destination
address. The second 8 bytes correspond to the source address.
Parsed from file cascade.mib.txt
Company: None
Module: CASCADE-MIB
This object provides the Smds destination address and Smds
source address of the last Smds pdu to cause the violation
Smds Sa Da On Same Port. The first 8 bytes of the octet string
(i.e.; 16 digits in BCD format) correspond to the destination
address. The second 8 bytes correspond to the source address.
Parsed from file CASCADE-MIB.mib
Module: CASCADE-MIB
Vendor: Cascade Communications Corp.
Module: CASCADE-MIB
[Automatically extracted from oidview.com]
lportSmdsPduHdrSip3SaDaOnSamePort OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Sa Da On Same Port. The first 8 bytes of the octet string (i.e.; 16 digits in BCD format) correspond to the destination address. The second 8 bytes correspond to the source address. " ::= { lportEntry 234 }
lportSmdsPduHdrSip3SaDaOnSamePort OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Sa Da On Same Port. The first 8 bytes of the octet string (i.e.; 16 digits in BCD format) correspond to the destination address. The second 8 bytes correspond to the source address. " ::= { lportEntry 234 }
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.4.1.277.1.5.1.1.184 | lportAtmDataRateQoS2 | 0 | 0 | An estimate of the logical port's data rate in bits per second reserved for QoS class 2. |
1.3.6.1.4.1.277.1.5.1.1.185 | lportAtmDataRateQoS3 | 0 | 0 | An estimate of the logical port's data rate in bits per second reserved for QoS class 3. |
1.3.6.1.4.1.277.1.5.1.1.186 | lportAtmDataRateQoS4 | 0 | 0 | An estimate of the logical port's data rate in bits per second reserved for QoS class 4. |
1.3.6.1.4.1.277.1.5.1.1.187 | lportOutVAvailbwQoS1 | 0 | 0 | Current outgoing available virtual bandwidth reserved for QoS class 1. |
1.3.6.1.4.1.277.1.5.1.1.188 | lportOutVAvailbwQoS2 | 0 | 0 | Current outgoing available virtual bandwidth reserved for QoS class 2. |
1.3.6.1.4.1.277.1.5.1.1.189 | lportOutVAvailbwQoS3 | 0 | 0 | Current outgoing available virtual bandwidth reserved for QoS class 3. |
1.3.6.1.4.1.277.1.5.1.1.190 | lportOutVAvailbwQoS4 | 0 | 0 | Current outgoing available virtual bandwidth reserved for QoS class 4. |
1.3.6.1.4.1.277.1.5.1.1.191 | lportInVAvailbwQoS1 | 0 | 0 | Current incoming available virtual bandwidth reserved for QoS class 1. |
1.3.6.1.4.1.277.1.5.1.1.192 | lportInVAvailbwQoS2 | 0 | 0 | Current incoming available virtual bandwidth reserved for QoS class 2. |
1.3.6.1.4.1.277.1.5.1.1.193 | lportInVAvailbwQoS3 | 0 | 0 | Current incoming available virtual bandwidth reserved for QoS class 3. |
1.3.6.1.4.1.277.1.5.1.1.194 | lportInVAvailbwQoS4 | 0 | 0 | Current incoming available virtual bandwidth reserved for QoS class 4. |
1.3.6.1.4.1.277.1.5.1.1.195 | lportOutAllocbwQoS1 | 0 | 0 | Current outgoing allocated bandwidth for QoS Class 1. |
1.3.6.1.4.1.277.1.5.1.1.196 | lportOutAllocbwQoS2 | 0 | 0 | Current outgoing allocated bandwidth for QoS Class 2. |
1.3.6.1.4.1.277.1.5.1.1.197 | lportOutAllocbwQoS3 | 0 | 0 | Current outgoing allocated bandwidth for QoS Class 3. |
1.3.6.1.4.1.277.1.5.1.1.198 | lportOutAllocbwQoS4 | 0 | 0 | Current outgoing allocated bandwidth for QoS Class 4. |
1.3.6.1.4.1.277.1.5.1.1.199 | lportInAllocbwQoS1 | 0 | 0 | Current incoming allocated bandwidth for QoS Class 1. |
1.3.6.1.4.1.277.1.5.1.1.200 | lportInAllocbwQoS2 | 0 | 0 | Current incoming allocated bandwidth for QoS Class 2. |
1.3.6.1.4.1.277.1.5.1.1.201 | lportInAllocbwQoS3 | 0 | 0 | Current incoming allocated bandwidth for QoS Class 3. |
1.3.6.1.4.1.277.1.5.1.1.202 | lportInAllocbwQoS4 | 0 | 0 | Current incoming allocated bandwidth for QoS Class 4. |
1.3.6.1.4.1.277.1.5.1.1.203 | lportDynamicQoSbw | 0 | 0 | Bitmap defining which QoS Classes should have bandwidth allocated dynamically from lportDataRate instead of reserving a percentag… |
1.3.6.1.4.1.277.1.5.1.1.204 | lportSVCRetryTimer, lportSvcHoldDownTimer | 0 | 0 | The duration in seconds (1..255) the network is allowed to re-establish a SVC after network failure before clearing the SVC. A va… |
1.3.6.1.4.1.277.1.5.1.1.205 | lportAtmNetworkType, lportAtmConnectionType | 0 | 0 | Whether this lport is supporting a private or public network. |
1.3.6.1.4.1.277.1.5.1.1.206 | lportAtmRouteMetricQoS1 | 0 | 0 | Routing metric associated with QoS Class 1. |
1.3.6.1.4.1.277.1.5.1.1.207 | lportAtmRouteMetricQoS2 | 0 | 0 | Routing metric associated with QoS Class 2. |
1.3.6.1.4.1.277.1.5.1.1.208 | lportAtmRouteMetricQoS3 | 0 | 0 | Routing metric associated with QoS Class 3. |
1.3.6.1.4.1.277.1.5.1.1.209 | lportAtmRouteMetricQoS4 | 0 | 0 | Routing metric associated with QoS Class 4. |
1.3.6.1.4.1.277.1.5.1.1.210 | lportIlmiPollTimeout | 0 | 0 | The duration in seconds (1..255) the ILMI poll is generated by the network-side UME. A value of 0 set to default polling period o… |
1.3.6.1.4.1.277.1.5.1.1.211 | lportAtmProtocol | 0 | 0 | UNI protocol version for this port. |
1.3.6.1.4.1.277.1.5.1.1.212 | lportIlmiAdminStatus | 0 | 0 | Administrative state for ILMI function on this port. |
1.3.6.1.4.1.277.1.5.1.1.213 | lportIlmiOperStatus | 0 | 0 | Operational status for ILMI function on this port. |
1.3.6.1.4.1.277.1.5.1.1.214 | lportIlmiPollRetry | 0 | 0 | The number of retries of ILMI poll request will be generated when network-side UME detects loss of ILMI connectivity. A value of… |
1.3.6.1.4.1.277.1.5.1.1.215 | lportAtmVpiBits | 0 | 0 | Number of bits of VPI supported. |
1.3.6.1.4.1.277.1.5.1.1.216 | lportAtmVciBits | 0 | 0 | Number of bits of VCI supported. |
1.3.6.1.4.1.277.1.5.1.1.217 | lportAtmOamAlarmEnable | 0 | 0 | If disabled then OAM alarms are not generated for circuits that are down on this lport. |
1.3.6.1.4.1.277.1.5.1.1.218 | lportInVAvailbw | 0 | 0 | Currently available Incoming virtual bandwidth. |
1.3.6.1.4.1.277.1.5.1.1.219 | lportbwUNIPolicy | 0 | 0 | The network policy towards requiring sufficient bandwidth at the UNI interface prior to allowing a circuit to be established. |
1.3.6.1.4.1.277.1.5.1.1.220 | lportStarvation | 0 | 0 | The CE/CBR card detected a starvation condition on this lport for an extended period |
1.3.6.1.4.1.277.1.5.1.1.221 | lportRecOverflow | 0 | 0 | The CE/CBR card detected a receive overflow condition on this lport for an extended period. |
1.3.6.1.4.1.277.1.5.1.1.222 | lportLossOfCellSequence | 0 | 0 | The CE/CBR card detected a LOS condition on this lport for an extended period. |
1.3.6.1.4.1.277.1.5.1.1.223 | lportLossOfStructurePointer | 0 | 0 | The structured CBR card detected a loss of structure pointer condition on this lport for an extended period. |
1.3.6.1.4.1.277.1.5.1.1.224 | lportCbrInsDummyCells | 0 | 0 | The number of dummy cells inserted due to cell loss on a constant bit rate (AAL1) interface. |
1.3.6.1.4.1.277.1.5.1.1.225 | lportRecFifoUnderflowCnt | 0 | 0 | The number of receive FIFO underflows since the last reset. If this condition persists, a lportCBRLineDataError trap is issued in… |
1.3.6.1.4.1.277.1.5.1.1.226 | lportRecFifoOverflowCnt | 0 | 0 | The number of receive FIFO overflows since the last reset. If this condition persists, a lportCBRLineDataError trap is issued ind… |
1.3.6.1.4.1.277.1.5.1.1.227 | lportCbrLossOfStructurePointerCnt | 0 | 0 | The object counts how often the structured CBR card detected a loss of the structure pointer since the last reset. |
1.3.6.1.4.1.277.1.5.1.1.228 | lportCbrLossOfCellSequenceCnt | 0 | 0 | The number of loss of cell sequence since the last reset. |
1.3.6.1.4.1.277.1.5.1.1.229 | lportShaperId | 0 | 0 | The shaper to be used for this ATM trunk interworking with frame relay: 1-port ATM-IWU STM-1/STS-3c card Values: 1..16 |
1.3.6.1.4.1.277.1.5.1.1.230 | lportIlmiPrefixScreenMode, lportDteIlmiPrefixScreenMode | 0 | 0 | The type of screening to apply against dynamic prefixes received from the peer ILMI entity at this DTE port. |
1.3.6.1.4.1.277.1.5.1.1.231 | lportSmdsPduViolTca | 0 | 0 | This object defines the ability to enable and disable SMDS pdu violation traps on this logical port. This functionality applies t… |
1.3.6.1.4.1.277.1.5.1.1.232 | lportSmdsPduViolThresh | 0 | 0 | This object defines the Smds pdu violation threshold for this logical port. The allowable range of threshold values is 1-255. The… |
1.3.6.1.4.1.277.1.5.1.1.233 | lportSmdsPduHdrSip3SaNotFound | 0 | 0 | This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Sa Not… |
1.3.6.1.4.1.277.1.5.1.1.235 | lportSmdsPduHdrSip3DstGaNotFound | 0 | 0 | This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Dst Ga… |
1.3.6.1.4.1.277.1.5.1.1.236 | lportSmdsPduHdrSip3DstIaScrnFail | 0 | 0 | This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Dst Ia… |
1.3.6.1.4.1.277.1.5.1.1.237 | lportSmdsPduHdrSip3SaValFail | 0 | 0 | This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Sa Val… |
1.3.6.1.4.1.277.1.5.1.1.238 | lportSmdsPduHdrSip3DstIaNotFound | 0 | 0 | This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Dst Ia… |
1.3.6.1.4.1.277.1.5.1.1.239 | lportSmdsPduHdrSip3SrcIaScrnFail | 0 | 0 | This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Src Ia… |
1.3.6.1.4.1.277.1.5.1.1.240 | lportSmdsPduHdrSip3DstGaScrnFail | 0 | 0 | This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Dst Ga… |
1.3.6.1.4.1.277.1.5.1.1.241 | lportSmdsPduHdrSip3SaTypeInvalid | 0 | 0 | This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Sa Typ… |
1.3.6.1.4.1.277.1.5.1.1.242 | lportSmdsPduHdrSip3DaTypeInvalid | 0 | 0 | This object provides the Smds destination address and Smds source address of the last Smds pdu to cause the violation Smds Da Typ… |
1.3.6.1.4.1.277.1.5.1.1.243 | lportSmdsPduHdrDxi2LinkIdInvalid | 0 | 0 | This object provides the dxi2 header of the last Smds pdu to cause the violation Dxi2 Link Id Invalid. The length of this object … |
1.3.6.1.4.1.277.1.5.1.1.244 | lportSmdsPduHdrDxi2CrInvalid | 0 | 0 | This object provides the dxi2 header of the last Smds pdu to cause the violation Dxi2 Cr Invalid. The length of this object is 4 … |
1.3.6.1.4.1.277.1.5.1.1.245 | lportSmdsPduHdrDxi2CtrlInvalid | 0 | 0 | This object provides the dxi2 header of the last Smds pdu to cause the violation Dxi2 Ctrl Invalid. The length of this object is … |
1.3.6.1.4.1.277.1.5.1.1.246 | lportSmdsPduHdrDxi2StationIdInvalid | 0 | 0 | This object provides the dxi2 header of the last Smds pdu to cause the violation Dxi2 Station Id Invalid. The length of this obje… |
1.3.6.1.4.1.277.1.5.1.1.247 | lportSmdsPduHdrDxi2AeInvalid | 0 | 0 | This object provides the dxi2 header of the last Smds pdu to cause the violation Dxi2 Ae Invalid. The length of this object is 4 … |
1.3.6.1.4.1.277.1.5.1.1.248 | lportDS0FarendLpbkEnabled | 0 | 0 | Set a single DS0 into farend loopback 1-24. |
1.3.6.1.4.1.277.1.5.1.1.249 | lportDS0FarendLpbkDisabled | 0 | 0 | Set a single DS0 out farend loopback 1-24. |
1.3.6.1.4.1.277.1.5.1.1.250 | lportTrkProtFailureThreshold | 0 | 0 | The time, measured in seconds, that Trunk Protocol waits before transitioning the state of an unresponsive trunk from UP to DOWN.… |
1.3.6.1.4.1.277.1.5.1.1.251 | lportPtr | 0 | 0 | An octet string indicating the lport pointer. |
1.3.6.1.4.1.277.1.5.1.1.252 | lportISDNPoolUtil | 0 | 0 | The percent utilization of the B-channel pool that this b-channel belongs to. |
1.3.6.1.4.1.277.1.5.1.1.253 | lportISDNIpAddrAssignFail, lportPPPNegotiationFailCode | 0 | 0 | The cause value for why PPP negotiation has failed. |
1.3.6.1.4.1.277.1.5.1.1.254 | lportTrkUtilQoS1 | 0 | 0 | An estimate of the real QoS1 utilization of the trunk bandwidth in terms of a percentage of the configured trunk bandwidth. |
1.3.6.1.4.1.277.1.5.1.1.255 | lportTrkUtilQoS2 | 0 | 0 | An estimate of the real QoS2 utilization of the trunk bandwidth in terms of a percentage of the configured trunk bandwidth. |
1.3.6.1.4.1.277.1.5.1.1.256 | lportTrkUtilQoS3 | 0 | 0 | An estimate of the real QoS3 utilization of the trunk bandwidth in terms of a percentage of the configured trunk bandwidth. |
1.3.6.1.4.1.277.1.5.1.1.257 | lportTrkUtilQoS4 | 0 | 0 | An estimate of the real QoS4 utilization of the trunk bandwidth in terms of a percentage of the configured trunk bandwidth. |
1.3.6.1.4.1.277.1.5.1.1.258 | lportIlmiNumOctetsTx | 0 | 0 | The number of ILMI octets transmitted on this ATM port. |
1.3.6.1.4.1.277.1.5.1.1.259 | lportIlmiNumOctetsRx | 0 | 0 | The number of ILMI octets received on this ATM port. |
1.3.6.1.4.1.277.1.5.1.1.260 | lportIlmiNumPdusTx | 0 | 0 | The number of ILMI PDU's transmitted on this ATM port. |
1.3.6.1.4.1.277.1.5.1.1.261 | lportIlmiNumPdusRx | 0 | 0 | The number of properly formatted ILMI PDU's received on this ATM port. |
1.3.6.1.4.1.277.1.5.1.1.262 | lportIlmiNumErrorsRx | 0 | 0 | The number of improperly formatted ILMI PDU's received on this ATM port. |
1.3.6.1.4.1.277.1.5.1.1.263 | lportIlmiNumUmePollsTx | 0 | 0 | The number of ILMI polls sent by the UME entity on this ATM DCE port. |
1.3.6.1.4.1.277.1.5.1.1.264 | lportIlmiNumUmeResponsesRx | 0 | 0 | The number of ILMI poll responses received by the UME entity on this ATM DCE port. |
1.3.6.1.4.1.277.1.5.1.1.265 | lportIlmiVPI | 0 | 0 | The VPI value of the VCC provisioned for the ILMI. The default value is 0. |
1.3.6.1.4.1.277.1.5.1.1.266 | lportIlmiVCI | 0 | 0 | The VCI value of the VCC provisioned for the ILMI. The default value is 16. |
1.3.6.1.4.1.277.1.5.1.1.267 | lportInCells | 0 | 0 | The total number of cells received |
1.3.6.1.4.1.277.1.5.1.1.268 | lportOutCells | 0 | 0 | The total number of cells transmitted |
1.3.6.1.4.1.277.1.5.1.1.269 | lportDS1ChannelId | 0 | 0 | The channel id of the DS1 channel for the channelized DS3 IOP. |
1.3.6.1.4.1.277.1.5.1.1.270 | lportCDV | 0 | 0 | The Cell Delay Variation of this port measured in microseconds. |
1.3.6.1.4.1.277.1.5.1.1.271 | lportAtmTrkIomCktDiagStr | 0 | 0 | Internal diagnostic information. |
1.3.6.1.4.1.277.1.5.1.1.272 | lportAtmTrkSpCktDiagStr | 0 | 0 | Internal diagnostic information. |
1.3.6.1.4.1.277.1.5.1.1.273 | lportAuthState | 0 | 0 | Authentication enabled for this port, yes or no. |
1.3.6.1.4.1.277.1.5.1.1.274 | lportAuthDomainID | 0 | 0 | Authentication Domain ID for this lport. |
1.3.6.1.4.1.277.1.5.1.1.275 | lportAuthPPPOption | 0 | 0 | PPP authentication options. |
1.3.6.1.4.1.277.1.5.1.1.276 | lportAuthFailReason | 0 | 0 | Reason for authentication failure - trap sent to NMS. |
1.3.6.1.4.1.277.1.5.1.1.277 | lportEchoRequestOption | 0 | 0 | The sending of Echo Requests enabled for this port, yes or no. |
1.3.6.1.4.1.277.1.5.1.1.278 | lportEchoRequestInterval | 0 | 0 | The # seconds to wait between sending Echo Requests. |
1.3.6.1.4.1.277.1.5.1.1.279 | lportEchoRequestMaxTries | 0 | 0 | The max # times to send an Echo Request without getting a response. |
1.3.6.1.4.1.277.1.5.1.1.280 | lportMultilinkProtocolOption | 0 | 0 | PPP Multilink Protocol enabled for this port, yes or no. |
1.3.6.1.4.1.277.1.5.1.1.281 | lportMultilinkProtocolFailReason | 0 | 0 | Failure to create an MP bundle or to add a link to an MP Bundle - trap sent. |
1.3.6.1.4.1.277.1.5.1.1.282 | lportBandwidthAllocProtocolOption | 0 | 0 | PPP Bandwidth Alloc Protocol enabled for this port, yes or no. |
1.3.6.1.4.1.277.1.5.1.1.283 | lportBandwidthAllocProtocolCallFailReason | 0 | 0 | BAP Call Fail Status code (Q.931 cause code) - trap sent to NMS. |
1.3.6.1.4.1.277.1.5.1.1.284 | lportPrivateNetOverflow | 0 | 0 | Indicates how circuits belonging to private lports are handled, when the resources of the network have become exhausted. If set t… |
... |