This variable indicates the Line Status of the
interface. It contains loopback, failure, re-
ceived 'alarm' and transmitted 'alarm' infor-
mation.
The cascds1LineStatus is a bit map represented as a sum,
therefore, it can represent multiple failures (alarms) and
a LoopbackState simultaneously.
cascds1NoAlarm should be set if and only if no other flag is
set.
If the cascds1LoopbackState bit is set, the loopback in ef-
fect can be determined from the cascds1LoopbackConfig object.
The various bit positions are:
1 cascds1NoAlarm No Alarm Present
2 cascds1RcvFarEndLOF Far end LOF (a.k.a., Yellow Alarm)
4 cascds1XmtFarEndLOF Near end sending LOF Indication
8 cascds1RcvAIS Far end sending AIS
16 cascds1XmtAIS Near end sending AIS
32 cascds1LossOfFrame Near end LOF (a.k.a., Red Alarm)
64 cascds1LossOfSignal Near end Loss Of Signal
128 cascds1LoopbackState Near end is looped
256 cascds1T16AIS E1 TS16 AIS
512 cascds1RcvFarEndLOMF Far End Sending TS16 LOMF
1024 cascds1XmtFarEndLOMF Near End Sending TS16 LOMF
2048 cascds1RcvTestCode Near End detects a test code
4096 cascds1OtherFailure any line status not defined here
Parsed from file cascade.mib.txt
Company: None
Module: CASCADE-MIB
This variable indicates the Line Status of the
interface. It contains loopback, failure, re-
ceived 'alarm' and transmitted 'alarm' infor-
mation.
The dsx1LineStatus is a bit map represented as a sum,
therefore, it can represent multiple failures (alarms) and
a LoopbackState simultaneously.
dsx1NoAlarm should be set if and only if no other flag is
set.
If the dsx1LoopbackState bit is set, the loopback in ef-
fect can be determined from the dsx1LoopbackConfig object.
The various bit positions are:
1 dsx1NoAlarm No Alarm Present
2 dsx1RcvFarEndLOF Far end LOF (a.k.a., Yellow Alarm)
4 dsx1XmtFarEndLOF Near end sending LOF Indication
8 dsx1RcvAIS Far end sending AIS
16 dsx1XmtAIS Near end sending AIS
32 dsx1LossOfFrame Near end LOF (a.k.a., Red Alarm)
64 dsx1LossOfSignal Near end Loss Of Signal
128 dsx1LoopbackState Near end is looped
256 dsx1T16AIS E1 TS16 AIS
512 dsx1RcvFarEndLOMF Far End Sending TS16 LOMF
1024 dsx1XmtFarEndLOMF Near End Sending TS16 LOMF
2048 dsx1RcvTestCode Near End detects a test code
4096 dsx1OtherFailure any line status not defined here
Parsed from file CASCADE-MIB.mib
Module: CASCADE-MIB
Vendor: Cascade Communications Corp.
Module: CASCADE-MIB
[Automatically extracted from oidview.com]
cascds1LineStatus OBJECT-TYPE SYNTAX INTEGER (1..8191) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the Line Status of the interface. It contains loopback, failure, re- ceived 'alarm' and transmitted 'alarm' infor- mation. The cascds1LineStatus is a bit map represented as a sum, therefore, it can represent multiple failures (alarms) and a LoopbackState simultaneously. cascds1NoAlarm should be set if and only if no other flag is set. If the cascds1LoopbackState bit is set, the loopback in ef- fect can be determined from the cascds1LoopbackConfig object. The various bit positions are: 1 cascds1NoAlarm No Alarm Present 2 cascds1RcvFarEndLOF Far end LOF (a.k.a., Yellow Alarm) 4 cascds1XmtFarEndLOF Near end sending LOF Indication 8 cascds1RcvAIS Far end sending AIS 16 cascds1XmtAIS Near end sending AIS 32 cascds1LossOfFrame Near end LOF (a.k.a., Red Alarm) 64 cascds1LossOfSignal Near end Loss Of Signal 128 cascds1LoopbackState Near end is looped 256 cascds1T16AIS E1 TS16 AIS 512 cascds1RcvFarEndLOMF Far End Sending TS16 LOMF 1024 cascds1XmtFarEndLOMF Near End Sending TS16 LOMF 2048 cascds1RcvTestCode Near End detects a test code 4096 cascds1OtherFailure any line status not defined here" ::= { cascds1ConfigEntry 10 }
dsx1LineStatus OBJECT-TYPE SYNTAX INTEGER (1..8191) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the Line Status of the interface. It contains loopback, failure, re- ceived 'alarm' and transmitted 'alarm' infor- mation. The dsx1LineStatus is a bit map represented as a sum, therefore, it can represent multiple failures (alarms) and a LoopbackState simultaneously. dsx1NoAlarm should be set if and only if no other flag is set. If the dsx1LoopbackState bit is set, the loopback in ef- fect can be determined from the dsx1LoopbackConfig object. The various bit positions are: 1 dsx1NoAlarm No Alarm Present 2 dsx1RcvFarEndLOF Far end LOF (a.k.a., Yellow Alarm) 4 dsx1XmtFarEndLOF Near end sending LOF Indication 8 dsx1RcvAIS Far end sending AIS 16 dsx1XmtAIS Near end sending AIS 32 dsx1LossOfFrame Near end LOF (a.k.a., Red Alarm) 64 dsx1LossOfSignal Near end Loss Of Signal 128 dsx1LoopbackState Near end is looped 256 dsx1T16AIS E1 TS16 AIS 512 dsx1RcvFarEndLOMF Far End Sending TS16 LOMF 1024 dsx1XmtFarEndLOMF Near End Sending TS16 LOMF 2048 dsx1RcvTestCode Near End detects a test code 4096 dsx1OtherFailure any line status not defined here" ::= { dsx1ConfigEntry 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.277.1.8.1.1.1 | dsx1SlotId, cascds1SlotId | 0 | 0 | The slot number of the corresponding DS1. |
| 1.3.6.1.4.1.277.1.8.1.1.2 | dsx1PortId, cascds1PortId | 0 | 0 | The port number of the corresponding DS1 on the board. |
| 1.3.6.1.4.1.277.1.8.1.1.3 | dsx1TimeElapsed, cascds1TimeElapsed | 0 | 0 | The number of seconds that have elapsed since the beginning of the current error-measurement period. |
| 1.3.6.1.4.1.277.1.8.1.1.4 | dsx1ValidIntervals, cascds1ValidIntervals | 0 | 0 | The number of previous intervals for which valid data was collected. The value will be 96 unless the interface was brought o… |
| 1.3.6.1.4.1.277.1.8.1.1.5 | dsx1LineType, cascds1LineType | 0 | 0 | This variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits… |
| 1.3.6.1.4.1.277.1.8.1.1.6 | dsx1LineCoding, cascds1LineCoding | 0 | 0 | This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its chara… |
| 1.3.6.1.4.1.277.1.8.1.1.7 | dsx1SendCode, cascds1SendCode | 0 | 0 | This variable indicates what type of code is being sent across the DS1 interface by the dev- ice. The values mean: dsx1SendNoCo… |
| 1.3.6.1.4.1.277.1.8.1.1.8 | dsx1CircuitIdentifier, cascds1CircuitIdentifier | 0 | 0 | This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting. |
| 1.3.6.1.4.1.277.1.8.1.1.9 | dsx1LoopbackConfig, cascds1LoopbackConfig | 0 | 0 | This variable represents the loopback confi- guration of the DS1 interface. Agents support- ing read/write access should retur… |
| 1.3.6.1.4.1.277.1.8.1.1.11 | dsx1SignalMode, cascds1SignalMode | 0 | 0 | 'none' indicates that no bits are reserved for signaling on this channel. 'robbedBit' indicates that T1 Robbed Bit Sig- naling is… |
| 1.3.6.1.4.1.277.1.8.1.1.12 | dsx1TransmitClockSource, cascds1TransmitClockSource | 0 | 0 | The source of Tranmit Clock. 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTimin… |
| 1.3.6.1.4.1.277.1.8.1.1.13 | dsx1Fdl, cascds1Fdl | 0 | 0 | This bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties: 'other' indicates that a prot… |
| 1.3.6.1.4.1.277.1.8.1.1.14 | dsx1FdlVersion, cascds1FdlVersion | 0 | 0 | The version of the Dallas FDL firmware |