The number of previous intervals for which
valid data was collected. The value will be 96
unless the interface was brought on-line within
the last 24 hours, in which case the value will
be the number of complete 15 minute intervals
the since interface has been online.
Parsed from file cascade.mib.txt
Company: None
Module: CASCADE-MIB
The number of previous intervals for which
valid data was collected. The value will be 96
unless the interface was brought on-line within
the last 24 hours, in which case the value will
be the number of complete 15 minute intervals
the since interface has been online.
Parsed from file CASCADE-MIB.mib
Module: CASCADE-MIB
Vendor: Cascade Communications Corp.
Module: CASCADE-MIB
[Automatically extracted from oidview.com]
dsx1ValidIntervals OBJECT-TYPE SYNTAX INTEGER (0..96) ACCESS read-only STATUS mandatory DESCRIPTION "The number of previous intervals for which valid data was collected. The value will be 96 unless the interface was brought on-line within the last 24 hours, in which case the value will be the number of complete 15 minute intervals the since interface has been online." ::= { dsx1ConfigEntry 4 }
dsx1ValidIntervals OBJECT-TYPE SYNTAX INTEGER (0..96) ACCESS read-only STATUS mandatory DESCRIPTION "The number of previous intervals for which valid data was collected. The value will be 96 unless the interface was brought on-line within the last 24 hours, in which case the value will be the number of complete 15 minute intervals the since interface has been online." ::= { dsx1ConfigEntry 4 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.277.1.8.1.1.1 | dsx1SlotId, cascds1SlotId | 0 | 0 | The slot number of the corresponding DS1. |
1.3.6.1.4.1.277.1.8.1.1.2 | dsx1PortId, cascds1PortId | 0 | 0 | The port number of the corresponding DS1 on the board. |
1.3.6.1.4.1.277.1.8.1.1.3 | dsx1TimeElapsed, cascds1TimeElapsed | 0 | 0 | The number of seconds that have elapsed since the beginning of the current error-measurement period. |
1.3.6.1.4.1.277.1.8.1.1.5 | dsx1LineType, cascds1LineType | 0 | 0 | This variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits… |
1.3.6.1.4.1.277.1.8.1.1.6 | dsx1LineCoding, cascds1LineCoding | 0 | 0 | This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its chara… |
1.3.6.1.4.1.277.1.8.1.1.7 | dsx1SendCode, cascds1SendCode | 0 | 0 | This variable indicates what type of code is being sent across the DS1 interface by the dev- ice. The values mean: dsx1SendNoCo… |
1.3.6.1.4.1.277.1.8.1.1.8 | dsx1CircuitIdentifier, cascds1CircuitIdentifier | 0 | 0 | This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting. |
1.3.6.1.4.1.277.1.8.1.1.9 | dsx1LoopbackConfig, cascds1LoopbackConfig | 0 | 0 | This variable represents the loopback confi- guration of the DS1 interface. Agents support- ing read/write access should retur… |
1.3.6.1.4.1.277.1.8.1.1.10 | dsx1LineStatus, cascds1LineStatus | 0 | 0 | This variable indicates the Line Status of the interface. It contains loopback, failure, re- ceived 'alarm' and transmitted 'a… |
1.3.6.1.4.1.277.1.8.1.1.11 | dsx1SignalMode, cascds1SignalMode | 0 | 0 | 'none' indicates that no bits are reserved for signaling on this channel. 'robbedBit' indicates that T1 Robbed Bit Sig- naling is… |
1.3.6.1.4.1.277.1.8.1.1.12 | dsx1TransmitClockSource, cascds1TransmitClockSource | 0 | 0 | The source of Tranmit Clock. 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTimin… |
1.3.6.1.4.1.277.1.8.1.1.13 | dsx1Fdl, cascds1Fdl | 0 | 0 | This bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties: 'other' indicates that a prot… |
1.3.6.1.4.1.277.1.8.1.1.14 | dsx1FdlVersion, cascds1FdlVersion | 0 | 0 | The version of the Dallas FDL firmware |