The current state of external hot failover detection.
External hot failover detection is only available for the bus on
which the master INX-NMM's NIC is configured. Setting this
variable to enabled(1) invokes external hot failover
detection/monitoring.
In addition to the status returned by the riLdcHfIntState object,
the following two failures descriptions are returned if an
enable(1) fails with a General Error.
dis_zero_p1_addr(8) is returned when the Ping 1 address is set to
0.0.0.0. See the Ext Failover Detection/Ping 1 variable.
dis_wrong_ext_bus(9) is returned when the master NIC is on Bus B
and the primary or backup configuration for Bus B is invalid. See
the Bus B Primary Backbone Slot #, Bus B Backup Backbone Slot #,
Bus B Primary Backbone Media, and Bus B Backup Backbone Media
variables.
Parsed from file Racal_INXNMM.mib.txt
Company: None
Module: INXNMM-MIB
The current state of external hot failover detection.
External hot failover detection is only available for the bus on
which the master INX-NMM's NIC is configured. Setting this
variable to enabled(1) invokes external hot failover
detection/monitoring.
In addition to the status returned by the riLdcHfIntState object,
the following two failures descriptions are returned if an
enable(1) fails with a General Error.
dis-zero-p1-addr(8) is returned when the Ping 1 address is set to
0.0.0.0. See the Ext Failover Detection/Ping 1 variable.
dis-wrong-ext-bus(9) is returned when the master NIC is on Bus B
and the primary or backup configuration for Bus B is invalid. See
the Bus B Primary Backbone Slot #, Bus B Backup Backbone Slot #,
Bus B Primary Backbone Media, and Bus B Backup Backbone Media
variables.
Parsed from file INXNMM-MIB.mib
Module: INXNMM-MIB
Vendor: Interlan
Module: INXNMM-MIB
[Automatically extracted from oidview.com]
riLdcHfExtState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), dis_no_A_config(3), dis_no_B_config(4), dis_A-B_conflict(5), dis_zero_frequency(6), dis_no_backbone(7) dis_zero_p1_addr(8), dis_wrong_ext_bus(9) } ACCESS read-write STATUS mandatory DESCRIPTION "The current state of external hot failover detection. External hot failover detection is only available for the bus on which the master INX-NMM's NIC is configured. Setting this variable to enabled(1) invokes external hot failover detection/monitoring. In addition to the status returned by the riLdcHfIntState object, the following two failures descriptions are returned if an enable(1) fails with a General Error. dis_zero_p1_addr(8) is returned when the Ping 1 address is set to 0.0.0.0. See the Ext Failover Detection/Ping 1 variable. dis_wrong_ext_bus(9) is returned when the master NIC is on Bus B and the primary or backup configuration for Bus B is invalid. See the Bus B Primary Backbone Slot #, Bus B Backup Backbone Slot #, Bus B Primary Backbone Media, and Bus B Backup Backbone Media variables." ::={ riHotFail 12 }
riLdcHfExtState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), dis-no-A-config(3), dis-no-B-config(4), dis-A-B-conflict(5), dis-zero-frequency(6), dis-no-backbone(7), dis-zero-p1-addr(8), dis-wrong-ext-bus(9) } ACCESS read-write STATUS mandatory DESCRIPTION "The current state of external hot failover detection. External hot failover detection is only available for the bus on which the master INX-NMM's NIC is configured. Setting this variable to enabled(1) invokes external hot failover detection/monitoring. In addition to the status returned by the riLdcHfIntState object, the following two failures descriptions are returned if an enable(1) fails with a General Error. dis-zero-p1-addr(8) is returned when the Ping 1 address is set to 0.0.0.0. See the Ext Failover Detection/Ping 1 variable. dis-wrong-ext-bus(9) is returned when the master NIC is on Bus B and the primary or backup configuration for Bus B is invalid. See the Bus B Primary Backbone Slot #, Bus B Backup Backbone Slot #, Bus B Primary Backbone Media, and Bus B Backup Backbone Media variables." ::={ riHotFail 12 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.28.10.14.12.0 | riLdcHfExtState | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.28.10.14.1 | riLdcHfAPrimaryAui | 1 | 1 | The number of the slot in which the primary Bus A backbone connectivity module for the chassis is installed.(CMM Slot is recommen… |
| 1.3.6.1.4.1.28.10.14.2 | riLdcHfAPrimaryMedia | 1 | 1 | The media type of the primary Bus A backbone connectivity module for the chassis. This variable returns backbone-thick(11) if th… |
| 1.3.6.1.4.1.28.10.14.3 | riLdcHfBPrimaryAui | 1 | 1 | The number of the slot in which the primary Bus B backbone connectivity module for the chassis is installed. You can set this va… |
| 1.3.6.1.4.1.28.10.14.4 | riLdcHfBPrimaryMedia | 1 | 1 | The media type of the primary Bus B backbone connectivity module for the chassis. This variable returns backbone-thick(11) if th… |
| 1.3.6.1.4.1.28.10.14.5 | riLdcHfABackupAui | 1 | 1 | The number of the slot in which the backup Bus A backbone connectivity module for the chassis is installed. Note: If you do not … |
| 1.3.6.1.4.1.28.10.14.6 | riLdcHfABackupMedia | 1 | 1 | The media type of the backup Bus A backbone connectivity module for the chassis. This variable returns backbone-thick(11) if the… |
| 1.3.6.1.4.1.28.10.14.7 | riLdcHfBBackupAui | 1 | 1 | The number of the slot in which the backup Bus B backbone connectivity module for the chassis is installed. You can set this var… |
| 1.3.6.1.4.1.28.10.14.8 | riLdcHfBBackupMedia | 1 | 1 | The media type of the backup Bus B backbone connectivity module for the chassis. This variable returns backbone-thick(11) if the… |
| 1.3.6.1.4.1.28.10.14.9 | riLdcHfIntState | 1 | 1 | The current state of internal hot failover detection for both Bus A and Bus B. Setting this variable to enabled(1) invokes inter… |
| 1.3.6.1.4.1.28.10.14.10 | riLdcHfIntPollFreq | 1 | 1 | The frequency, in seconds, with which the INX-NMM master and slave modules attempt to transmit a self-addressed packet onto the b… |
| 1.3.6.1.4.1.28.10.14.11 | riLdcHfIntRetries | 1 | 1 | The number of polling transmits (see the previous variable, Internal Polling Frequency) that must fail before internal failover i… |
| 1.3.6.1.4.1.28.10.14.13 | riLdcHfExtPing1 | 1 | 1 | The IP adress of the node to which the master INX-NMM will ping to detect external cable failures. The master INX-NMM wil send t… |
| 1.3.6.1.4.1.28.10.14.14 | riLdcHfExtPing2 | 1 | 1 | The IP address of a second node to ping should the first host not respond (see the previous variable, Ext Failover Detection/Ping… |
| 1.3.6.1.4.1.28.10.14.15 | riLdcHfExtPollFreq | 1 | 1 | The frequency, in seconds, with which the master INX-NMM pings the address specified by Ext Failover Detection/Ping 1 or Ext Fail… |
| 1.3.6.1.4.1.28.10.14.16 | riLdcHfExtResponseTmo | 1 | 1 | The number of seconds the INX-NMM waits for a response to the ping before the ping is considered failed. The range of valid valu… |
| 1.3.6.1.4.1.28.10.14.17 | riLdcHfExtRetries | 1 | 1 | The number of pings to the host specified by Ext Failover Detection/Ping 1 that must fail before external failover is invoked. T… |
| 1.3.6.1.4.1.28.10.14.18 | riLdcHfHysteresis | 1 | 1 | The number of seconds required between failovers from the backup configuration to the primary configuration. This hysteresis time… |
| 1.3.6.1.4.1.28.10.14.19 | riLdcHfTable | 1 | 20 | riLdcHftable |