The IP address of a second node to ping should
the first host not respond (see the previous variable, Ext Failover
Detection/Ping 1). This eliminates the false hot failover
detections that occur when the ping1 host is rebooting at the time
the ping is made.
The INX-NMM only tries to ping this address once the ping address
reverts to the one specified by Ext Failover Detection/Ping 1. As
with Ext Failover Detection/Ping1, set this variable to the address
of the node to which the master INX-NMM will ping to detect
external cable failures.
The master INX-NMM sends the pings on the bus for which its NIC is
configured (i.e., the value of Logic Module Bus).
If you set this variable to 0.0.0.0, external hot failover
detection is enabled, but only Ext Failover Detection/Ping1 is
used.
Parsed from file Racal_INXNMM.mib.txt
Company: None
Module: INXNMM-MIB
The IP address of a second node to ping should
the first host not respond (see the previous variable, Ext Failover
Detection/Ping 1). This eliminates the false hot failover
detections that occur when the ping1 host is rebooting at the time
the ping is made.
The INX-NMM only tries to ping this address once the ping address
reverts to the one specified by Ext Failover Detection/Ping 1. As
with Ext Failover Detection/Ping1, set this variable to the address
of the node to which the master INX-NMM will ping to detect
external cable failures.
The master INX-NMM sends the pings on the bus for which its NIC is
configured (i.e., the value of Logic Module Bus).
If you set this variable to 0.0.0.0, external hot failover
detection is enabled, but only Ext Failover Detection/Ping1 is
used.
Parsed from file INXNMM-MIB.mib
Module: INXNMM-MIB
Vendor: Interlan
Module: INXNMM-MIB
[Automatically extracted from oidview.com]
riLdcHfExtPing2 OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION " The IP address of a second node to ping should the first host not respond (see the previous variable, Ext Failover Detection/Ping 1). This eliminates the false hot failover detections that occur when the ping1 host is rebooting at the time the ping is made. The INX-NMM only tries to ping this address once the ping address reverts to the one specified by Ext Failover Detection/Ping 1. As with Ext Failover Detection/Ping1, set this variable to the address of the node to which the master INX-NMM will ping to detect external cable failures. The master INX-NMM sends the pings on the bus for which its NIC is configured (i.e., the value of Logic Module Bus). If you set this variable to 0.0.0.0, external hot failover detection is enabled, but only Ext Failover Detection/Ping1 is used." ::={ riHotFail 14 }
riLdcHfExtPing2 OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION " The IP address of a second node to ping should the first host not respond (see the previous variable, Ext Failover Detection/Ping 1). This eliminates the false hot failover detections that occur when the ping1 host is rebooting at the time the ping is made. The INX-NMM only tries to ping this address once the ping address reverts to the one specified by Ext Failover Detection/Ping 1. As with Ext Failover Detection/Ping1, set this variable to the address of the node to which the master INX-NMM will ping to detect external cable failures. The master INX-NMM sends the pings on the bus for which its NIC is configured (i.e., the value of Logic Module Bus). If you set this variable to 0.0.0.0, external hot failover detection is enabled, but only Ext Failover Detection/Ping1 is used." ::={ riHotFail 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.28.10.14.14.0 | riLdcHfExtPing2 | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.28.10.14.1 | riLdcHfAPrimaryAui | 1 | 1 | The number of the slot in which the primary Bus A backbone connectivity module for the chassis is installed.(CMM Slot is recommen… |
| 1.3.6.1.4.1.28.10.14.2 | riLdcHfAPrimaryMedia | 1 | 1 | The media type of the primary Bus A backbone connectivity module for the chassis. This variable returns backbone-thick(11) if th… |
| 1.3.6.1.4.1.28.10.14.3 | riLdcHfBPrimaryAui | 1 | 1 | The number of the slot in which the primary Bus B backbone connectivity module for the chassis is installed. You can set this va… |
| 1.3.6.1.4.1.28.10.14.4 | riLdcHfBPrimaryMedia | 1 | 1 | The media type of the primary Bus B backbone connectivity module for the chassis. This variable returns backbone-thick(11) if th… |
| 1.3.6.1.4.1.28.10.14.5 | riLdcHfABackupAui | 1 | 1 | The number of the slot in which the backup Bus A backbone connectivity module for the chassis is installed. Note: If you do not … |
| 1.3.6.1.4.1.28.10.14.6 | riLdcHfABackupMedia | 1 | 1 | The media type of the backup Bus A backbone connectivity module for the chassis. This variable returns backbone-thick(11) if the… |
| 1.3.6.1.4.1.28.10.14.7 | riLdcHfBBackupAui | 1 | 1 | The number of the slot in which the backup Bus B backbone connectivity module for the chassis is installed. You can set this var… |
| 1.3.6.1.4.1.28.10.14.8 | riLdcHfBBackupMedia | 1 | 1 | The media type of the backup Bus B backbone connectivity module for the chassis. This variable returns backbone-thick(11) if the… |
| 1.3.6.1.4.1.28.10.14.9 | riLdcHfIntState | 1 | 1 | The current state of internal hot failover detection for both Bus A and Bus B. Setting this variable to enabled(1) invokes inter… |
| 1.3.6.1.4.1.28.10.14.10 | riLdcHfIntPollFreq | 1 | 1 | The frequency, in seconds, with which the INX-NMM master and slave modules attempt to transmit a self-addressed packet onto the b… |
| 1.3.6.1.4.1.28.10.14.11 | riLdcHfIntRetries | 1 | 1 | The number of polling transmits (see the previous variable, Internal Polling Frequency) that must fail before internal failover i… |
| 1.3.6.1.4.1.28.10.14.12 | riLdcHfExtState | 1 | 1 | The current state of external hot failover detection. External hot failover detection is only available for the bus on which the … |
| 1.3.6.1.4.1.28.10.14.13 | riLdcHfExtPing1 | 1 | 1 | The IP adress of the node to which the master INX-NMM will ping to detect external cable failures. The master INX-NMM wil send t… |
| 1.3.6.1.4.1.28.10.14.15 | riLdcHfExtPollFreq | 1 | 1 | The frequency, in seconds, with which the master INX-NMM pings the address specified by Ext Failover Detection/Ping 1 or Ext Fail… |
| 1.3.6.1.4.1.28.10.14.16 | riLdcHfExtResponseTmo | 1 | 1 | The number of seconds the INX-NMM waits for a response to the ping before the ping is considered failed. The range of valid valu… |
| 1.3.6.1.4.1.28.10.14.17 | riLdcHfExtRetries | 1 | 1 | The number of pings to the host specified by Ext Failover Detection/Ping 1 that must fail before external failover is invoked. T… |
| 1.3.6.1.4.1.28.10.14.18 | riLdcHfHysteresis | 1 | 1 | The number of seconds required between failovers from the backup configuration to the primary configuration. This hysteresis time… |
| 1.3.6.1.4.1.28.10.14.19 | riLdcHfTable | 1 | 20 | riLdcHftable |