The number of the slot in which the backup Bus B
backbone connectivity module for the chassis is installed. You can
set this variable to not-configured(200) if you do not want a
backup configuration slot number for Bus B.
You cannot set this variable to the slot number of the INX-CMM.
Parsed from file Racal_INXNMM.mib.txt
Company: None
Module: INXNMM-MIB
The number of the slot in which the backup Bus B
backbone connectivity module for the chassis is installed. You can
set this variable to not-configured(200) if you do not want a
backup configuration slot number for Bus B.
You cannot set this variable to the slot number of the INX-CMM.
Parsed from file INXNMM-MIB.mib
Module: INXNMM-MIB
Vendor: Interlan
Module: INXNMM-MIB
[Automatically extracted from oidview.com]
riLdcHfBBackupAui OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of the slot in which the backup Bus B backbone connectivity module for the chassis is installed. You can set this variable to not-configured(200) if you do not want a backup configuration slot number for Bus B. You cannot set this variable to the slot number of the INX-CMM." ::={ riHotFail 7 }
riLdcHfBBackupAui OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of the slot in which the backup Bus B backbone connectivity module for the chassis is installed. You can set this variable to not-configured(200) if you do not want a backup configuration slot number for Bus B. You cannot set this variable to the slot number of the INX-CMM." ::={ riHotFail 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.28.10.14.7.0 | riLdcHfBBackupAui | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.28.10.14.1 | riLdcHfAPrimaryAui | 1 | 1 | The number of the slot in which the primary Bus A backbone connectivity module for the chassis is installed.(CMM Slot is recommen… |
1.3.6.1.4.1.28.10.14.2 | riLdcHfAPrimaryMedia | 1 | 1 | The media type of the primary Bus A backbone connectivity module for the chassis. This variable returns backbone-thick(11) if th… |
1.3.6.1.4.1.28.10.14.3 | riLdcHfBPrimaryAui | 1 | 1 | The number of the slot in which the primary Bus B backbone connectivity module for the chassis is installed. You can set this va… |
1.3.6.1.4.1.28.10.14.4 | riLdcHfBPrimaryMedia | 1 | 1 | The media type of the primary Bus B backbone connectivity module for the chassis. This variable returns backbone-thick(11) if th… |
1.3.6.1.4.1.28.10.14.5 | riLdcHfABackupAui | 1 | 1 | The number of the slot in which the backup Bus A backbone connectivity module for the chassis is installed. Note: If you do not … |
1.3.6.1.4.1.28.10.14.6 | riLdcHfABackupMedia | 1 | 1 | The media type of the backup Bus A backbone connectivity module for the chassis. This variable returns backbone-thick(11) if the… |
1.3.6.1.4.1.28.10.14.8 | riLdcHfBBackupMedia | 1 | 1 | The media type of the backup Bus B backbone connectivity module for the chassis. This variable returns backbone-thick(11) if the… |
1.3.6.1.4.1.28.10.14.9 | riLdcHfIntState | 1 | 1 | The current state of internal hot failover detection for both Bus A and Bus B. Setting this variable to enabled(1) invokes inter… |
1.3.6.1.4.1.28.10.14.10 | riLdcHfIntPollFreq | 1 | 1 | The frequency, in seconds, with which the INX-NMM master and slave modules attempt to transmit a self-addressed packet onto the b… |
1.3.6.1.4.1.28.10.14.11 | riLdcHfIntRetries | 1 | 1 | The number of polling transmits (see the previous variable, Internal Polling Frequency) that must fail before internal failover i… |
1.3.6.1.4.1.28.10.14.12 | riLdcHfExtState | 1 | 1 | The current state of external hot failover detection. External hot failover detection is only available for the bus on which the … |
1.3.6.1.4.1.28.10.14.13 | riLdcHfExtPing1 | 1 | 1 | The IP adress of the node to which the master INX-NMM will ping to detect external cable failures. The master INX-NMM wil send t… |
1.3.6.1.4.1.28.10.14.14 | riLdcHfExtPing2 | 1 | 1 | The IP address of a second node to ping should the first host not respond (see the previous variable, Ext Failover Detection/Ping… |
1.3.6.1.4.1.28.10.14.15 | riLdcHfExtPollFreq | 1 | 1 | The frequency, in seconds, with which the master INX-NMM pings the address specified by Ext Failover Detection/Ping 1 or Ext Fail… |
1.3.6.1.4.1.28.10.14.16 | riLdcHfExtResponseTmo | 1 | 1 | The number of seconds the INX-NMM waits for a response to the ping before the ping is considered failed. The range of valid valu… |
1.3.6.1.4.1.28.10.14.17 | riLdcHfExtRetries | 1 | 1 | The number of pings to the host specified by Ext Failover Detection/Ping 1 that must fail before external failover is invoked. T… |
1.3.6.1.4.1.28.10.14.18 | riLdcHfHysteresis | 1 | 1 | The number of seconds required between failovers from the backup configuration to the primary configuration. This hysteresis time… |
1.3.6.1.4.1.28.10.14.19 | riLdcHfTable | 1 | 20 | riLdcHftable |