An ASCII string containing the 64 flags representing
the current active UPS specific faults for the Symmetra
3-Phase UPS models. If the Network Card is unable to
determine the values of the flags, this variable is set
to 'UNKNOWN'. If the connected UPS does not use this
variable, it is set to 'NOT SUPPORTED'.
The flags are numbered from 1 to 64, and read from left
to right. The bits are defined as follows:
Flag 1: External Switch Gear Failure
Flag 2: External Transformer Over Temperature
Flag 3: External DC Circuit Breaker Tripped
Flag 4: System Power Supply Failure
Flag 5: Battery Monitor Card Failure
Flag 6: Battery Monitor Card Removed
Flag 7: XR Communication Card Failure
Flag 8: XR Communication Card Removed
Flag 9: External Switch Gear Monitoring Card Failure
Flag 10: External Switch Gear Monitoring Card Removed
Flag 11: Internal DC Circuit Breaker Tripped
Flag 12: Static Bypass Switch Failure
Flag 13: System EEPROM Removed
Flag 14: System EEPROM Failure
Flag 15: UPS in Forced Bypass
Flag 16: Static Bypass Switch Module Removed
Flag 17: System Start-Up Configuration Fault
Flag 18: Battery Charger Shutdown Externally
Flag 19:
Flag 20:
Flag 21:
Flag 22:
Flag 23:
Flag 24:
Flag 25:
Flag 26:
Flag 27:
Flag 28:
Flag 29:
Flag 30:
Flag 31:
Flag 32:
Flag 33:
Flag 34:
Flag 35:
Flag 36:
Flag 37:
Flag 38:
Flag 39:
Flag 40:
Flag 41:
Flag 42:
Flag 43:
Flag 44:
Flag 45:
Flag 46:
Flag 47:
Flag 48:
Flag 49:
Flag 50:
Flag 51:
Flag 52:
Flag 53:
Flag 54:
Flag 55:
Flag 56:
Flag 57:
Flag 58:
Flag 59:
Flag 60:
Flag 61:
Flag 62:
Flag 63:
Flag 64:
Parsed from file powernet.mib.txt
Company: None
Module: PowerNet-MIB
An ASCII string containing the 64 flags representing
the current active UPS specific faults for the Symmetra
3-Phase UPS models. If the Network Card is unable to
determine the values of the flags, this variable is set
to 'UNKNOWN'. If the connected UPS does not use this
variable, it is set to 'NOT SUPPORTED'.
The flags are numbered from 1 to 64, and read from left
to right. The bits are defined as follows:
Flag 1: External Switch Gear Failure
Flag 2: External Transformer Over Temperature
Flag 3: External DC Circuit Breaker Tripped
Flag 4: System Power Supply Failure
Flag 5: Battery Monitor Card Failure
Flag 6: Battery Monitor Card Removed
Flag 7: XR Communication Card Failure
Flag 8: XR Communication Card Removed
Flag 9: External Switch Gear Monitoring Card Failure
Flag 10: External Switch Gear Monitoring Card Removed
Flag 11: Internal DC Circuit Breaker Tripped
Flag 12: Static Bypass Switch Failure
Flag 13: System EEPROM Removed
Flag 14: System EEPROM Failure
Flag 15: UPS in Forced Bypass
Flag 16: Static Bypass Switch Module Removed
Flag 17: System Start-Up Configuration Fault
Flag 18: Battery Charger Shutdown Externally
Flag 19:
Flag 20:
Flag 21:
Flag 22:
Flag 23:
Flag 24:
Flag 25:
Flag 26:
Flag 27:
Flag 28:
Flag 29:
Flag 30:
Flag 31:
Flag 32:
Flag 33:
Flag 34:
Flag 35:
Flag 36:
Flag 37:
Flag 38:
Flag 39:
Flag 40:
Flag 41:
Flag 42:
Flag 43:
Flag 44:
Flag 45:
Flag 46:
Flag 47:
Flag 48:
Flag 49:
Flag 50:
Flag 51:
Flag 52:
Flag 53:
Flag 54:
Flag 55:
Flag 56:
Flag 57:
Flag 58:
Flag 59:
Flag 60:
Flag 61:
Flag 62:
Flag 63:
Flag 64:
Parsed from file PowerNet-MIB.mib
Module: PowerNet-MIB
upsAdvStateSymmetra3PhaseSpecificFaults OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "An ASCII string containing the 64 flags representing the current active UPS specific faults for the Symmetra 3-Phase UPS models. If the Network Card is unable to determine the values of the flags, this variable is set to 'UNKNOWN'. If the connected UPS does not use this variable, it is set to 'NOT SUPPORTED'. The flags are numbered from 1 to 64, and read from left to right. The bits are defined as follows: Flag 1: External Switch Gear Failure Flag 2: External Transformer Over Temperature Flag 3: External DC Circuit Breaker Tripped Flag 4: System Power Supply Failure Flag 5: Battery Monitor Card Failure Flag 6: Battery Monitor Card Removed Flag 7: XR Communication Card Failure Flag 8: XR Communication Card Removed Flag 9: External Switch Gear Monitoring Card Failure Flag 10: External Switch Gear Monitoring Card Removed Flag 11: Internal DC Circuit Breaker Tripped Flag 12: Static Bypass Switch Failure Flag 13: System EEPROM Removed Flag 14: System EEPROM Failure Flag 15: UPS in Forced Bypass Flag 16: Static Bypass Switch Module Removed Flag 17: System Start-Up Configuration Fault Flag 18: Battery Charger Shutdown Externally Flag 19:
Flag 20: Flag 21: Flag 22: Flag 23: Flag 24: Flag 25: Flag 26: Flag 27: Flag 28: Flag 29: Flag 30: Flag 31: Flag 32: Flag 33: Flag 34: Flag 35: Flag 36: Flag 37: Flag 38: Flag 39: Flag 40: Flag 41: Flag 42: Flag 43: Flag 44: Flag 45: Flag 46: Flag 47: Flag 48: Flag 49: Flag 50: Flag 51: Flag 52: Flag 53: Flag 54: Flag 55: Flag 56: Flag 57: Flag 58: Flag 59: Flag 60: Flag 61: Flag 62: Flag 63: Flag 64: " ::= { upsAdvState 2 }
Vendor: American Power Conversion Corp.
Module: PowerNet-MIB
[Automatically extracted from oidview.com]
upsAdvStateSymmetra3PhaseSpecificFaults OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "An ASCII string containing the 64 flags representing the current active UPS specific faults for the Symmetra 3-Phase UPS models. If the Network Card is unable to determine the values of the flags, this variable is set to 'UNKNOWN'. If the connected UPS does not use this variable, it is set to 'NOT SUPPORTED'. The flags are numbered from 1 to 64, and read from left to right. The bits are defined as follows: Flag 1: External Switch Gear Failure Flag 2: External Transformer Over Temperature Flag 3: External DC Circuit Breaker Tripped Flag 4: System Power Supply Failure Flag 5: Battery Monitor Card Failure Flag 6: Battery Monitor Card Removed Flag 7: XR Communication Card Failure Flag 8: XR Communication Card Removed Flag 9: External Switch Gear Monitoring Card Failure Flag 10: External Switch Gear Monitoring Card Removed Flag 11: Internal DC Circuit Breaker Tripped Flag 12: Static Bypass Switch Failure Flag 13: System EEPROM Removed Flag 14: System EEPROM Failure Flag 15: UPS in Forced Bypass Flag 16: Static Bypass Switch Module Removed Flag 17: System Start-Up Configuration Fault Flag 18: Battery Charger Shutdown Externally Flag 19:
Flag 20: Flag 21: Flag 22: Flag 23: Flag 24: Flag 25: Flag 26: Flag 27: Flag 28: Flag 29: Flag 30: Flag 31: Flag 32: Flag 33: Flag 34: Flag 35: Flag 36: Flag 37: Flag 38: Flag 39: Flag 40: Flag 41: Flag 42: Flag 43: Flag 44: Flag 45: Flag 46: Flag 47: Flag 48: Flag 49: Flag 50: Flag 51: Flag 52: Flag 53: Flag 54: Flag 55: Flag 56: Flag 57: Flag 58: Flag 59: Flag 60: Flag 61: Flag 62: Flag 63: Flag 64: " ::= { upsAdvState 2 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.318.1.1.1.11.2.2.0 | upsAdvStateSymmetra3PhaseSpecificFaults | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.318.1.1.1.11.2.1 | upsAdvStateAbnormalConditions | 1 | 1 | An ASCII string containing the 32 flags representing the current active UPS faults. If the Network Card is unable to determine th… |
1.3.6.1.4.1.318.1.1.1.11.2.3 | upsAdvStateDP300ESpecificFaults | 1 | 1 | An ASCII string containing the 64 flags representing the current active UPS specific faults for the Silcon DP300E UPS models. If … |
1.3.6.1.4.1.318.1.1.1.11.2.4 | upsAdvStateSymmetraSpecificFaults | 1 | 1 | An ASCII string containing the 64 flags representing the current active UPS specific faults for the Symmetra UPS models. If the N… |
1.3.6.1.4.1.318.1.1.1.11.2.5 | upsAdvStateSmartUPSSpecificFaults | 1 | 1 | An ASCII string containing the 64 flags representing the current active UPS specific faults for the Smart-UPS UPS models. If the … |
1.3.6.1.4.1.318.1.1.1.11.2.6 | upsAdvStateSystemMessages | 1 | 1 | An ASCII string containing the 3 digit Decimal code representing the current active message from the System Message Register. Eac… |
1.3.6.1.4.1.318.1.1.1.11.2.7 | upsAdvStateTotaltimeonbattery | 0 | 0 | Total time the UPS has been in battery operation. |
1.3.6.1.4.1.318.1.1.1.11.2.8 | upsAdvStateTotaltimeonbypass | 0 | 0 | Total time the UPS has been in bypass operation. |
1.3.6.1.4.1.318.1.1.1.11.2.9 | upsAdvStateTotaltimeonNormal | 0 | 0 | Total time the UPS has been in normal operation. |
1.3.6.1.4.1.318.1.1.1.11.2.10 | upsAdvStateNumberoftimesonbattery | 0 | 0 | Number of times the UPS was on battery. Since the last reset of statistical data. |
1.3.6.1.4.1.318.1.1.1.11.2.11 | upsAdvStateNumberoftimesbypass | 0 | 0 | Number of times the UPS was in bypass. Since the last reset of statistical data. |
1.3.6.1.4.1.318.1.1.1.11.2.12 | upsAdvStateNumberoftimesNormal | 0 | 0 | Number of times the UPS was in normal operation. Since the last reset of statistical data. |
1.3.6.1.4.1.318.1.1.1.11.2.13 | upsAdvStateEcomode | 0 | 0 | Eco mode status. 1: UPS is on Eco-mode 2: UPS is not on Eco-mode. |