An ASCII string containing the 3 digit Decimal code
representing the current active message from the
System Message Register. Each code should remain active
for a minimum of 15 seconds. However, in the worst case
scenario, a code could be cleared after only 5 seconds.
It is recommended that this object be polled at least
once every 4 seconds in order to get the most accurate
representation of the current UPS System Message. If the
Network Card is unable to determine the value of the
System Message Register, this variable is set to
'UNKNOWN'.
Parsed from file powernet.mib.txt
Company: None
Module: PowerNet-MIB
An ASCII string containing the 3 digit Decimal code
representing the current active message from the
System Message Register. Each code should remain active
for a minimum of 15 seconds. However, in the worst case
scenario, a code could be cleared after only 5 seconds.
It is recommended that this object be polled at least
once every 4 seconds in order to get the most accurate
representation of the current UPS System Message. If the
Network Card is unable to determine the value of the
System Message Register, this variable is set to
'UNKNOWN'.
Parsed from file PowerNet-MIB.mib
Module: PowerNet-MIB
upsAdvStateSystemMessages OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "An ASCII string containing the 3 digit Decimal code representing the current active message from the System Message Register. Each code should remain active for a minimum of 15 seconds. However, in the worst case scenario, a code could be cleared after only 5 seconds. It is recommended that this object be polled at least once every 4 seconds in order to get the most accurate representation of the current UPS System Message. If the Network Card is unable to determine the value of the System Message Register, this variable is set to 'UNKNOWN'." ::= { upsAdvState 6 }
Vendor: American Power Conversion Corp.
Module: PowerNet-MIB
[Automatically extracted from oidview.com]
upsAdvStateSystemMessages OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "An ASCII string containing the 3 digit Decimal code representing the current active message from the System Message Register. Each code should remain active for a minimum of 15 seconds. However, in the worst case scenario, a code could be cleared after only 5 seconds. It is recommended that this object be polled at least once every 4 seconds in order to get the most accurate representation of the current UPS System Message. If the Network Card is unable to determine the value of the System Message Register, this variable is set to 'UNKNOWN'." ::= { upsAdvState 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.318.1.1.1.11.2.6.0 | upsAdvStateSystemMessages | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.318.1.1.1.11.2.1 | upsAdvStateAbnormalConditions | 1 | 1 | An ASCII string containing the 32 flags representing the current active UPS faults. If the Network Card is unable to determine th… |
| 1.3.6.1.4.1.318.1.1.1.11.2.2 | upsAdvStateSymmetra3PhaseSpecificFaults | 1 | 1 | An ASCII string containing the 64 flags representing the current active UPS specific faults for the Symmetra 3-Phase UPS models. … |
| 1.3.6.1.4.1.318.1.1.1.11.2.3 | upsAdvStateDP300ESpecificFaults | 1 | 1 | An ASCII string containing the 64 flags representing the current active UPS specific faults for the Silcon DP300E UPS models. If … |
| 1.3.6.1.4.1.318.1.1.1.11.2.4 | upsAdvStateSymmetraSpecificFaults | 1 | 1 | An ASCII string containing the 64 flags representing the current active UPS specific faults for the Symmetra UPS models. If the N… |
| 1.3.6.1.4.1.318.1.1.1.11.2.5 | upsAdvStateSmartUPSSpecificFaults | 1 | 1 | An ASCII string containing the 64 flags representing the current active UPS specific faults for the Smart-UPS UPS models. If the … |
| 1.3.6.1.4.1.318.1.1.1.11.2.7 | upsAdvStateTotaltimeonbattery | 0 | 0 | Total time the UPS has been in battery operation. |
| 1.3.6.1.4.1.318.1.1.1.11.2.8 | upsAdvStateTotaltimeonbypass | 0 | 0 | Total time the UPS has been in bypass operation. |
| 1.3.6.1.4.1.318.1.1.1.11.2.9 | upsAdvStateTotaltimeonNormal | 0 | 0 | Total time the UPS has been in normal operation. |
| 1.3.6.1.4.1.318.1.1.1.11.2.10 | upsAdvStateNumberoftimesonbattery | 0 | 0 | Number of times the UPS was on battery. Since the last reset of statistical data. |
| 1.3.6.1.4.1.318.1.1.1.11.2.11 | upsAdvStateNumberoftimesbypass | 0 | 0 | Number of times the UPS was in bypass. Since the last reset of statistical data. |
| 1.3.6.1.4.1.318.1.1.1.11.2.12 | upsAdvStateNumberoftimesNormal | 0 | 0 | Number of times the UPS was in normal operation. Since the last reset of statistical data. |
| 1.3.6.1.4.1.318.1.1.1.11.2.13 | upsAdvStateEcomode | 0 | 0 | Eco mode status. 1: UPS is on Eco-mode 2: UPS is not on Eco-mode. |