This is the error distribution model to be used to
identify signal degrade and signal fail conditions.
errorModelRandom selects a random error distribution
and declares signal conditions based on the thresholds
set in sonetLineSignalDegradeBer and sonetLineSignalFailBer.
errorModelBurst selects a burst error model and declares
signal degrade conditions based on the thresholds set in
sonetLineBipThrSeconds and sonetLineBipThrErrors.
errorModelNone disables detection of signal conditions.
Parsed from file fore-sonet.mib.txt
Company: None
Module: Fore-SONET-MIB
This is the error distribution model to be used to
identify signal degrade and signal fail conditions.
errorModelRandom selects a random error distribution
and declares signal conditions based on the thresholds
set in sonetLineSignalDegradeBer and sonetLineSignalFailBer.
errorModelBurst selects a burst error model and declares
signal degrade conditions based on the thresholds set in
sonetLineBipThrSeconds and sonetLineBipThrErrors.
errorModelNone disables detection of signal conditions.
Parsed from file Fore-SONET-MIB.mib
Module: Fore-SONET-MIB
Vendor: Fore Systems, Inc.
Module: Fore-SONET-MIB
[Automatically extracted from oidview.com]
sonetLineBerErrorModel OBJECT-TYPE SYNTAX INTEGER { errorModelNone(0), errorModelRandom(1), errorModelBurst(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is the error distribution model to be used to identify signal degrade and signal fail conditions. errorModelRandom selects a random error distribution and declares signal conditions based on the thresholds set in sonetLineSignalDegradeBer and sonetLineSignalFailBer. errorModelBurst selects a burst error model and declares signal degrade conditions based on the thresholds set in sonetLineBipThrSeconds and sonetLineBipThrErrors. errorModelNone disables detection of signal conditions." DEFVAL { errorModelRandom } ::= { sonetConfEntry 36 }
sonetLineBerErrorModel OBJECT-TYPE SYNTAX INTEGER { errorModelNone(0), errorModelRandom(1), errorModelBurst(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is the error distribution model to be used to identify signal degrade and signal fail conditions. errorModelRandom selects a random error distribution and declares signal conditions based on the thresholds set in sonetLineSignalDegradeBer and sonetLineSignalFailBer. errorModelBurst selects a burst error model and declares signal degrade conditions based on the thresholds set in sonetLineBipThrSeconds and sonetLineBipThrErrors. errorModelNone disables detection of signal conditions." DEFVAL { errorModelRandom } ::= { sonetConfEntry 36 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.1 | sonetConfBoard | 0 | 0 | The index of this port's switch board. |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.2 | sonetConfModule | 0 | 0 | The network module of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.3 | sonetConfPort | 0 | 0 | The number of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.4 | sonetLineType | 0 | 0 | This variable describes the line type for this interface. The line type for optical SONET signals may be single-mode (short or l… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.5 | sonetLineCoding | 0 | 0 | This variable describes the line coding for this interface. The B3ZS and CMI are used for electrical SONET signals (STS-1 and ST… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.6 | sonetFramingStandardDefault | 0 | 0 | This variable identify the default value of the framing standard that is used by this port (SONET or SDH). |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.7 | sonetFramingStandardOper | 0 | 0 | This variable identify the operational value of the framing standard that is used by this port (SONET or SDH). |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.8 | sonetPathWidth | 0 | 0 | This variable indicates the type of the SONET Path. Assigned types are the STS-Nc Synchronous Payload Envelopes where N=1,3,9,12… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.9 | sonetLoopbackConfig | 0 | 0 | This variable represents the current loopback status of the SONET interface. The possible values are: sonetNoLoop (1) means that t… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.10 | sonetTxClockSource | 0 | 0 | The source of the transmit clock. |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.11 | sonetRxScrambling | 0 | 0 | This variable indicates whether the information is being descrambled on receiving. It should be set the same as the transmitting… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.12 | sonetTxScrambling | 0 | 0 | This variable indicates whether the information (48 octet payload) is being scrambled before transmitting. It should be set the … |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.13 | sonetSectionStatus | 0 | 0 | This variable indicates the Section Status of the interface. It is defined in the SONET IETF draft section configuration table a… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.14 | sonetLineStatus | 0 | 0 | This variable indicates the Line Status of the interface. A similar variable is defined in the SONET IETF draft line configurati… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.15 | sonetPathStatus | 0 | 0 | This variable indicates the Path Status of the interface. It is defined in the SONET IETF draft path configuration table as sone… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.16 | sonetIdleUnassignedCells | 0 | 0 | This variable indicates the type of cells that should be sent in case there is no data to send. According to the ATM Forum, Unas… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.17 | sonetAtmStatus | 0 | 0 | This variable indicates the ATM Status of the interface. The variable is a bit map represented as a sum, therefore, it can repr… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.18 | sonetLineAis | 0 | 0 | This variable controls the insertion of line alarm indication signal (AIS_L). When set to sonetLineAisOn, AIS is inserted into t… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.19 | sonetLineRdi | 0 | 0 | The variable controls the insertion of Line Remote Defect Indication (RDI_L). When set to sonetLineRdiAuto, RDI_L is automatical… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.20 | sonetPathAis | 0 | 0 | This variable controls the insertion of STS Path Alarm Indication Signal (AIS_P). When set to sonetPathAisOn, the complete SPE, … |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.21 | sonetPathRdi | 0 | 0 | This variable controls the insertion of Path Remote Defect Indication (RDI_P). When set to sonetPathRdiAuto, RDI_P is automatica… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.22 | sonetFebe | 0 | 0 | This variable controls the insertion of line and path far end block errors. When set to sonetFebeAuto, one line or path FEBE is … |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.23 | sonetRxPathSignalLabel | 0 | 0 | This variable contains the path signal label byte (C2). The value in this variable is updated to a new path signal label value i… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.24 | sonetTxPathSignalLabel | 0 | 0 | This variable controls the transmit path signal label. The default value for ATM is 0x13 (19 decimal). |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.25 | sonetArbitraryPointer | 0 | 0 | This variable controls bits APTR[9:0] of arbitrary pointer register. It may be used along with the sonetPathPointerDiagnostic va… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.26 | sonetSectionDiagnostic | 0 | 0 | This variable controls the insertion of various types of section diagnostic bit patterns in the transmit stream. It is a bit map… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.27 | sonetLineDiagnostic | 0 | 0 | This variable controls the insertion of various types of line diagnostic bit patterns in the transmit stream. It is a bit map th… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.28 | sonetPathDiagnostic | 0 | 0 | This variable controls the insertion of various types of path diagnostic bit patterns in the transmit stream. It is a bit map th… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.29 | sonetPathPointerDiagnostic | 0 | 0 | This variable controls the insertion of various types of path pointer diagnostic bit patterns in the transmit stream. It is a bi… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.30 | sonetAtmDiagnostic | 0 | 0 | This variable controls the insertion of various types of atm diagnostic bit patterns in the transmit stream. It is a bit map tha… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.31 | sonetLineBipThrSeconds | 0 | 0 | This variable represents the consecutive number of BAD/GOOD seconds to detect/clear a B2 byte Line Bit Interleaved Parity (BIP) D… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.32 | sonetLineBipThrErrors | 0 | 0 | This variable is a threshold for the number of B2 byte Line Bit Interleaved Parity (BIP) Errors per second and is used as a param… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.33 | sonetLineBipFailEnable | 0 | 0 | This variable controls whether declaration of a Line BIP Defect forces the port's operState to Down. This variable is only applic… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.34 | sonetLineSignalDegradeBer | 0 | 0 | This is the exponent of 10 for the current signal degrade bit error rate (BER) threshold for this port. The value -7, for example… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.35 | sonetLineSignalFailBer | 0 | 0 | This is the exponent of 10 for the current signal fail bit error rate (BER) threshold for this port. The value -4, for example, r… |
| 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.37 | sonetLineBerState | 0 | 0 | This value describes the current state of the port as determined through bit error rate analysis. |