This variable indicates the Line Status of the interface. A
similar object is defined in the rfc1406 configuration table as
dsx1LineStatus. The variable contains loopback state
information and failure state information. It is a bit map
represented as a sum. The e1NoAlarm should be set if and only
if no other flag is set.
The various bit positions are:
1 e1NoAlarm
2 e1RxFarEndLOF Far end LOF (Receiving Yellow Alarm
Indication)
4 e1TxFarEndLOF Near end sending LOF Indication
(Yellow Alarm)
8 e1RxAIS Far end sending AIS
16 e1TxAIS Near end sending AIS (Not used)
32 e1LOF Near end Loss Of Frame (Red Alarm)
64 e1LOS Near end Loss Of Signal
128 e1LoopbackState Near end is in loopback mode
256 e1RxPLCPYel Receving PLCP Yellow
512 e1TxPLCPYel Transmitting PLCP Yellow
1024 e1RxPLCPLOF Receiving PLCP LOF
2048 e1RcvTestCode Receiving a test pattern
4096 e1OtherFailure any line status not defined here
32768 e1RxLCD Receiving LCD failure indication.
Parsed from file fore-e1.mib.txt
Company: None
Module: Fore-E1-MIB
This variable indicates the Line Status of the interface. A
similar object is defined in the rfc1406 configuration table as
dsx1LineStatus. The variable contains loopback state
information and failure state information. It is a bit map
represented as a sum. The e1NoAlarm should be set if and only
if no other flag is set.
The various bit positions are:
1 e1NoAlarm
2 e1RxFarEndLOF Far end LOF (Receiving Yellow Alarm
Indication)
4 e1TxFarEndLOF Near end sending LOF Indication
(Yellow Alarm)
8 e1RxAIS Far end sending AIS
16 e1TxAIS Near end sending AIS (Not used)
32 e1LOF Near end Loss Of Frame (Red Alarm)
64 e1LOS Near end Loss Of Signal
128 e1LoopbackState Near end is in loopback mode
256 e1RxPLCPYel Receving PLCP Yellow
512 e1TxPLCPYel Transmitting PLCP Yellow
1024 e1RxPLCPLOF Receiving PLCP LOF
2048 e1RcvTestCode Receiving a test pattern
4096 e1OtherFailure any line status not defined here
32768 e1RxLCD Receiving LCD failure indication.
Parsed from file Fore-E1-MIB.mib
Module: Fore-E1-MIB
Vendor: Fore Systems, Inc.
Module: Fore-E1-MIB
[Automatically extracted from oidview.com]
e1LineStatus OBJECT-TYPE SYNTAX INTEGER (1..65534) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the Line Status of the interface. A similar object is defined in the rfc1406 configuration table as dsx1LineStatus. The variable contains loopback state information and failure state information. It is a bit map represented as a sum. The e1NoAlarm should be set if and only if no other flag is set. The various bit positions are: 1 e1NoAlarm 2 e1RxFarEndLOF Far end LOF (Receiving Yellow Alarm Indication) 4 e1TxFarEndLOF Near end sending LOF Indication (Yellow Alarm) 8 e1RxAIS Far end sending AIS 16 e1TxAIS Near end sending AIS (Not used) 32 e1LOF Near end Loss Of Frame (Red Alarm) 64 e1LOS Near end Loss Of Signal 128 e1LoopbackState Near end is in loopback mode 256 e1RxPLCPYel Receving PLCP Yellow 512 e1TxPLCPYel Transmitting PLCP Yellow 1024 e1RxPLCPLOF Receiving PLCP LOF 2048 e1RcvTestCode Receiving a test pattern 4096 e1OtherFailure any line status not defined here 32768 e1RxLCD Receiving LCD failure indication." ::= { e1ConfEntry 10 }
e1LineStatus OBJECT-TYPE SYNTAX INTEGER (1..65534) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the Line Status of the interface. A similar object is defined in the rfc1406 configuration table as dsx1LineStatus. The variable contains loopback state information and failure state information. It is a bit map represented as a sum. The e1NoAlarm should be set if and only if no other flag is set. The various bit positions are: 1 e1NoAlarm 2 e1RxFarEndLOF Far end LOF (Receiving Yellow Alarm Indication) 4 e1TxFarEndLOF Near end sending LOF Indication (Yellow Alarm) 8 e1RxAIS Far end sending AIS 16 e1TxAIS Near end sending AIS (Not used) 32 e1LOF Near end Loss Of Frame (Red Alarm) 64 e1LOS Near end Loss Of Signal 128 e1LoopbackState Near end is in loopback mode 256 e1RxPLCPYel Receving PLCP Yellow 512 e1TxPLCPYel Transmitting PLCP Yellow 1024 e1RxPLCPLOF Receiving PLCP LOF 2048 e1RcvTestCode Receiving a test pattern 4096 e1OtherFailure any line status not defined here 32768 e1RxLCD Receiving LCD failure indication." ::= { e1ConfEntry 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.1 | e1ConfBoard | 0 | 0 | The index of this port's switch board. |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.2 | e1ConfModule | 0 | 0 | The network module of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.3 | e1ConfPort | 0 | 0 | The number of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.4 | e1LineType | 0 | 0 | This variable indicates the variety of E1 Line implementing this circuit. The type of circuit affects the number of bits per seco… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.5 | e1LineCoding | 0 | 0 | This variable describes the variety of Zero Code suppression used on this link, which in turn affects a number of its characteris… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.6 | e1SendCode | 0 | 0 | This variable indicates what type of code is being sent across the E1 interface by the device. The values mean: e1SendNoCode send… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.7 | e1ReceiveCode | 0 | 0 | This variable indicates the type of code that was received across the E1 interface. The values mean: e1ReceiveNoCode receiving loo… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.8 | e1LoopbackConfig | 0 | 0 | This variable represents the loopback configuration of the E1 interface. This variable is defined in the rfc1406 configuration ta… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.9 | e1TxClockSource | 0 | 0 | The source of the transmit clock. rxTiming(1) indicated that the recovered receive clock is used as the transmit clock. localTimi… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.11 | e1IdleUnassignedCells | 0 | 0 | This variable indicates the types of cells that should be sent in case there is no real data to send. According to the ATM Forum,… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.12 | e1LineLength | 0 | 0 | This variable represents the length of the physical cable connected to the e1 port. The user has to set this object to match the … |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.13 | e1LineTypeFraming | 0 | 0 | This variable indicates the way ATM cells are constructed from the E1 stream. e1Hcs(2) indicates that the ATM cells are construct… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.14 | e1RxScrambling | 0 | 0 | This variable indicates whether the information is being descrambled on receiving. It should be set the same as the transmitting … |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.15 | e1TxScrambling | 0 | 0 | This variable indicates whether the information (48 octet payload) is being scrambled before transmitting. It should be set the s… |