This variable indicates the way ATM cells are constructed from
the E1 stream.
e1Hcs(2) indicates that the ATM cells are constructed upon the
Header Check Sequence (HCS) inside the ATM cell
header.
e1Plcp(3) indicates that the ATM cells are constructed from the
E1 PLCP (Physical Layer Convergence Protocol) bits.
Parsed from file fore-e1.mib.txt
Company: None
Module: Fore-E1-MIB
This variable indicates the way ATM cells are constructed from
the E1 stream.
e1Hcs(2) indicates that the ATM cells are constructed upon the
Header Check Sequence (HCS) inside the ATM cell
header.
e1Plcp(3) indicates that the ATM cells are constructed from the
E1 PLCP (Physical Layer Convergence Protocol) bits.
Parsed from file Fore-E1-MIB.mib
Module: Fore-E1-MIB
Vendor: Fore Systems, Inc.
Module: Fore-E1-MIB
[Automatically extracted from oidview.com]
e1LineTypeFraming OBJECT-TYPE SYNTAX INTEGER { other (1), e1Hcs (2), e1Plcp (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates the way ATM cells are constructed from the E1 stream. e1Hcs(2) indicates that the ATM cells are constructed upon the Header Check Sequence (HCS) inside the ATM cell header. e1Plcp(3) indicates that the ATM cells are constructed from the E1 PLCP (Physical Layer Convergence Protocol) bits." ::= { e1ConfEntry 13 }
e1LineTypeFraming OBJECT-TYPE SYNTAX INTEGER { other (1), e1Hcs (2), e1Plcp (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates the way ATM cells are constructed from the E1 stream. e1Hcs(2) indicates that the ATM cells are constructed upon the Header Check Sequence (HCS) inside the ATM cell header. e1Plcp(3) indicates that the ATM cells are constructed from the E1 PLCP (Physical Layer Convergence Protocol) bits." ::= { e1ConfEntry 13 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.1 | e1ConfBoard | 0 | 0 | The index of this port's switch board. |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.2 | e1ConfModule | 0 | 0 | The network module of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.3 | e1ConfPort | 0 | 0 | The number of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.4 | e1LineType | 0 | 0 | This variable indicates the variety of E1 Line implementing this circuit. The type of circuit affects the number of bits per seco… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.5 | e1LineCoding | 0 | 0 | This variable describes the variety of Zero Code suppression used on this link, which in turn affects a number of its characteris… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.6 | e1SendCode | 0 | 0 | This variable indicates what type of code is being sent across the E1 interface by the device. The values mean: e1SendNoCode send… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.7 | e1ReceiveCode | 0 | 0 | This variable indicates the type of code that was received across the E1 interface. The values mean: e1ReceiveNoCode receiving loo… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.8 | e1LoopbackConfig | 0 | 0 | This variable represents the loopback configuration of the E1 interface. This variable is defined in the rfc1406 configuration ta… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.9 | e1TxClockSource | 0 | 0 | The source of the transmit clock. rxTiming(1) indicated that the recovered receive clock is used as the transmit clock. localTimi… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.10 | e1LineStatus | 0 | 0 | This variable indicates the Line Status of the interface. A similar object is defined in the rfc1406 configuration table as dsx1L… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.11 | e1IdleUnassignedCells | 0 | 0 | This variable indicates the types of cells that should be sent in case there is no real data to send. According to the ATM Forum,… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.12 | e1LineLength | 0 | 0 | This variable represents the length of the physical cable connected to the e1 port. The user has to set this object to match the … |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.14 | e1RxScrambling | 0 | 0 | This variable indicates whether the information is being descrambled on receiving. It should be set the same as the transmitting … |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.15 | e1TxScrambling | 0 | 0 | This variable indicates whether the information (48 octet payload) is being scrambled before transmitting. It should be set the s… |