This variable indicates the type of code that was received
across the E1 interface.
The values mean:
e1ReceiveNoCode receiving looped or normal data
e1ReceiveLineCode receiving request for a line loopback
e1ReceivePayloadCode receiving a request for a payload
loopback
e1ReceiveResetCode receiving a loopback deactivation
request
e1ReceiveQRS receiving a Quasi-Random Signal (QRS)
test pattern
e1Receive511Pattern receiving a 511 bit fixed test pattern
e1Receive3in24Pattern receiving a fixed test pattern of 3
bits set in 24
e1ReceiveOtherTestPattern receiving a test pattern other than
the above.
Parsed from file fore-e1.mib.txt
Company: None
Module: Fore-E1-MIB
This variable indicates the type of code that was received
across the E1 interface.
The values mean:
e1ReceiveNoCode receiving looped or normal data
e1ReceiveLineCode receiving request for a line loopback
e1ReceivePayloadCode receiving a request for a payload
loopback
e1ReceiveResetCode receiving a loopback deactivation
request
e1ReceiveQRS receiving a Quasi-Random Signal (QRS)
test pattern
e1Receive511Pattern receiving a 511 bit fixed test pattern
e1Receive3in24Pattern receiving a fixed test pattern of 3
bits set in 24
e1ReceiveOtherTestPattern receiving a test pattern other than
the above.
Parsed from file Fore-E1-MIB.mib
Module: Fore-E1-MIB
Vendor: Fore Systems, Inc.
Module: Fore-E1-MIB
[Automatically extracted from oidview.com]
e1ReceiveCode OBJECT-TYPE SYNTAX INTEGER { e1ReceiveNoCode (1), e1ReceiveLineCode (2), e1ReceivePayloadCode (3), e1ReceiveResetCode (4), e1SendQRS (5), e1Send511Pattern (6), e1Send3in24Pattern (7), e1SendOtherTestPattern (8) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the type of code that was received across the E1 interface. The values mean: e1ReceiveNoCode receiving looped or normal data e1ReceiveLineCode receiving request for a line loopback e1ReceivePayloadCode receiving a request for a payload loopback e1ReceiveResetCode receiving a loopback deactivation request e1ReceiveQRS receiving a Quasi-Random Signal (QRS) test pattern e1Receive511Pattern receiving a 511 bit fixed test pattern e1Receive3in24Pattern receiving a fixed test pattern of 3 bits set in 24 e1ReceiveOtherTestPattern receiving a test pattern other than the above." ::= { e1ConfEntry 7 }
e1ReceiveCode OBJECT-TYPE SYNTAX INTEGER { e1ReceiveNoCode (1), e1ReceiveLineCode (2), e1ReceivePayloadCode (3), e1ReceiveResetCode (4), e1SendQRS (5), e1Send511Pattern (6), e1Send3in24Pattern (7), e1SendOtherTestPattern (8) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the type of code that was received across the E1 interface. The values mean: e1ReceiveNoCode receiving looped or normal data e1ReceiveLineCode receiving request for a line loopback e1ReceivePayloadCode receiving a request for a payload loopback e1ReceiveResetCode receiving a loopback deactivation request e1ReceiveQRS receiving a Quasi-Random Signal (QRS) test pattern e1Receive511Pattern receiving a 511 bit fixed test pattern e1Receive3in24Pattern receiving a fixed test pattern of 3 bits set in 24 e1ReceiveOtherTestPattern receiving a test pattern other than the above." ::= { e1ConfEntry 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.1 | e1ConfBoard | 0 | 0 | The index of this port's switch board. |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.2 | e1ConfModule | 0 | 0 | The network module of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.3 | e1ConfPort | 0 | 0 | The number of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.4 | e1LineType | 0 | 0 | This variable indicates the variety of E1 Line implementing this circuit. The type of circuit affects the number of bits per seco… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.5 | e1LineCoding | 0 | 0 | This variable describes the variety of Zero Code suppression used on this link, which in turn affects a number of its characteris… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.6 | e1SendCode | 0 | 0 | This variable indicates what type of code is being sent across the E1 interface by the device. The values mean: e1SendNoCode send… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.8 | e1LoopbackConfig | 0 | 0 | This variable represents the loopback configuration of the E1 interface. This variable is defined in the rfc1406 configuration ta… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.9 | e1TxClockSource | 0 | 0 | The source of the transmit clock. rxTiming(1) indicated that the recovered receive clock is used as the transmit clock. localTimi… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.10 | e1LineStatus | 0 | 0 | This variable indicates the Line Status of the interface. A similar object is defined in the rfc1406 configuration table as dsx1L… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.11 | e1IdleUnassignedCells | 0 | 0 | This variable indicates the types of cells that should be sent in case there is no real data to send. According to the ATM Forum,… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.12 | e1LineLength | 0 | 0 | This variable represents the length of the physical cable connected to the e1 port. The user has to set this object to match the … |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.13 | e1LineTypeFraming | 0 | 0 | This variable indicates the way ATM cells are constructed from the E1 stream. e1Hcs(2) indicates that the ATM cells are construct… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.14 | e1RxScrambling | 0 | 0 | This variable indicates whether the information is being descrambled on receiving. It should be set the same as the transmitting … |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.15 | e1TxScrambling | 0 | 0 | This variable indicates whether the information (48 octet payload) is being scrambled before transmitting. It should be set the s… |