This variable indicates whether the information is being
descrambled on receiving. It should be set the same as the
transmitting side.
Parsed from file fore-e1.mib.txt
Company: None
Module: Fore-E1-MIB
This variable indicates whether the information is being
descrambled on receiving. It should be set the same as the
transmitting side.
Parsed from file Fore-E1-MIB.mib
Module: Fore-E1-MIB
Vendor: Fore Systems, Inc.
Module: Fore-E1-MIB
[Automatically extracted from oidview.com]
e1RxScrambling OBJECT-TYPE SYNTAX INTEGER { descrambling(1), noDescrambling(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates whether the information is being descrambled on receiving. It should be set the same as the transmitting side." DEFVAL { descrambling } ::= { e1ConfEntry 14 }
e1RxScrambling OBJECT-TYPE SYNTAX INTEGER { descrambling(1), noDescrambling(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates whether the information is being descrambled on receiving. It should be set the same as the transmitting side." DEFVAL { descrambling } ::= { e1ConfEntry 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.1 | e1ConfBoard | 0 | 0 | The index of this port's switch board. |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.2 | e1ConfModule | 0 | 0 | The network module of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.3 | e1ConfPort | 0 | 0 | The number of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.4 | e1LineType | 0 | 0 | This variable indicates the variety of E1 Line implementing this circuit. The type of circuit affects the number of bits per seco… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.5 | e1LineCoding | 0 | 0 | This variable describes the variety of Zero Code suppression used on this link, which in turn affects a number of its characteris… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.6 | e1SendCode | 0 | 0 | This variable indicates what type of code is being sent across the E1 interface by the device. The values mean: e1SendNoCode send… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.7 | e1ReceiveCode | 0 | 0 | This variable indicates the type of code that was received across the E1 interface. The values mean: e1ReceiveNoCode receiving loo… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.8 | e1LoopbackConfig | 0 | 0 | This variable represents the loopback configuration of the E1 interface. This variable is defined in the rfc1406 configuration ta… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.9 | e1TxClockSource | 0 | 0 | The source of the transmit clock. rxTiming(1) indicated that the recovered receive clock is used as the transmit clock. localTimi… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.10 | e1LineStatus | 0 | 0 | This variable indicates the Line Status of the interface. A similar object is defined in the rfc1406 configuration table as dsx1L… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.11 | e1IdleUnassignedCells | 0 | 0 | This variable indicates the types of cells that should be sent in case there is no real data to send. According to the ATM Forum,… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.12 | e1LineLength | 0 | 0 | This variable represents the length of the physical cable connected to the e1 port. The user has to set this object to match the … |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.13 | e1LineTypeFraming | 0 | 0 | This variable indicates the way ATM cells are constructed from the E1 stream. e1Hcs(2) indicates that the ATM cells are construct… |
| 1.3.6.1.4.1.326.2.2.1.1.8.1.1.1.15 | e1TxScrambling | 0 | 0 | This variable indicates whether the information (48 octet payload) is being scrambled before transmitting. It should be set the s… |