Parameters for a specific SEC10 regarding the filtering
and forwarding configuration for the specific SEC10 chip.
Parsed from file fore-sec10.mib.txt
Company: marconi
Module: SEC10
Vendor: Marconi
Module: SEC10 (fore-sec10.mib)
Type: ENTRY
Access: not-accessible
Syntax: Sec10CSR1Entry
Automatically extracted from www.mibdepot.com
sec10CSR1Entry OBJECT-TYPE SYNTAX Sec10CSR1Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "Parameters for a specific SEC10 regarding the filtering and forwarding configuration for the specific SEC10 chip." INDEX { ifIndex } ::= { sec10CSR1Table 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.326.2.3.2.3.1.1 | sec10SecureLearnMode | 0 | 0 | When secure learning is enabled, new addresses will be stored in the address database but will only be used for the forwarding de… |
1.3.6.1.4.1.326.2.3.2.3.1.2 | sec10RxErrorsMode | 0 | 0 | When receive errors are enabled, all packets, including those with errors, will be forwarded onto the packet bus. When disabled, … |
1.3.6.1.4.1.326.2.3.2.3.1.3 | sec10UploadMode | 0 | 0 | When the multicast hash upload is enabled, multicast messages with multicast address 01-A0-36-00-00-00 will be interpreted by end… |
1.3.6.1.4.1.326.2.3.2.3.1.4 | sec10FlaggedPktMode | 0 | 0 | When flagged packet mode is enabled, and none of the individual address flag bits are set, all packets with the flag bit set will… |
1.3.6.1.4.1.326.2.3.2.3.1.5 | sec10SniffPktMode | 0 | 0 | The sniff packets is enabled, all sniffed packets (transmitted or received) will be taken from the packet bus and transmitted on … |
1.3.6.1.4.1.326.2.3.2.3.1.6 | sec10IAPromMode | 0 | 0 | When individual address promiscuous mode is enabled, all individually addressed packets from the packet bus will be transmitted b… |
1.3.6.1.4.1.326.2.3.2.3.1.7 | sec10MCPromMode | 0 | 0 | When multicast promiscuous mode is enabled, all multicast messages from the packet bus will be transmitted by this SEC10 port. W… |
1.3.6.1.4.1.326.2.3.2.3.1.8 | sec10BackboneMode | 0 | 0 | When backbone mode is enabled, the port is selected as the backbone port for the workgroup and will transmit all individually add… |