When the multicast hash upload is enabled, multicast
messages with multicast address 01-A0-36-00-00-00 will
be interpreted by end stations as a hash upload message.
This will cause the end station to upload its multicast
hash table into the SEC for examination. When disabled,
the respective SEC chips will not generate hash upload
multicast messages nor receive hash tables from end stations.
In order for multicast hash table uploading to be implemented,
the end station device driver must have the ability to
recognize the 01-A0-36-00-00-00 address as a special
consideration. Further, the end station network interface
card implementation must maintain a multicast hash table.
Therefore, do not enable multicast hash uploading unless
the end stations on the port meet the aforementioned
criteria.
Parsed from file fore-sec10.mib.txt
Company: marconi
Module: SEC10
Vendor: Marconi
Module: SEC10 (fore-sec10.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
sec10UploadMode OBJECT-TYPE SYNTAX INTEGER { uploadEnabled(2), uploadDisabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "When the multicast hash upload is enabled, multicast messages with multicast address 01-A0-36-00-00-00 will be interpreted by end stations as a hash upload message. This will cause the end station to upload its multicast hash table into the SEC for examination. When disabled, the respective SEC chips will not generate hash upload multicast messages nor receive hash tables from end stations. In order for multicast hash table uploading to be implemented, the end station device driver must have the ability to recognize the 01-A0-36-00-00-00 address as a special consideration. Further, the end station network interface card implementation must maintain a multicast hash table. Therefore, do not enable multicast hash uploading unless the end stations on the port meet the aforementioned criteria." ::= { sec10CSR1Entry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.2.3.2.3.1.1 | sec10SecureLearnMode | 0 | 0 | When secure learning is enabled, new addresses will be stored in the address database but will only be used for the forwarding de… |
| 1.3.6.1.4.1.326.2.3.2.3.1.2 | sec10RxErrorsMode | 0 | 0 | When receive errors are enabled, all packets, including those with errors, will be forwarded onto the packet bus. When disabled, … |
| 1.3.6.1.4.1.326.2.3.2.3.1.4 | sec10FlaggedPktMode | 0 | 0 | When flagged packet mode is enabled, and none of the individual address flag bits are set, all packets with the flag bit set will… |
| 1.3.6.1.4.1.326.2.3.2.3.1.5 | sec10SniffPktMode | 0 | 0 | The sniff packets is enabled, all sniffed packets (transmitted or received) will be taken from the packet bus and transmitted on … |
| 1.3.6.1.4.1.326.2.3.2.3.1.6 | sec10IAPromMode | 0 | 0 | When individual address promiscuous mode is enabled, all individually addressed packets from the packet bus will be transmitted b… |
| 1.3.6.1.4.1.326.2.3.2.3.1.7 | sec10MCPromMode | 0 | 0 | When multicast promiscuous mode is enabled, all multicast messages from the packet bus will be transmitted by this SEC10 port. W… |
| 1.3.6.1.4.1.326.2.3.2.3.1.8 | sec10BackboneMode | 0 | 0 | When backbone mode is enabled, the port is selected as the backbone port for the workgroup and will transmit all individually add… |