This is the primary entry in the vismConfigToneDetectTable.
Each entry references a User configurable dual
frequency tones that can be detected on VISM.
Parsed from file CISCO-WAN-VISM-TONE-PLAN-MIB.mib
Module: CISCO-WAN-VISM-TONE-PLAN-MIB
This is the primary entry in the vismConfigToneDetectTable.
Each entry references a User configurable dual
frequency tones that can be detected on VISM.
This is the primary entry in the vismConfigToneDetectTable.
Each entry references a User configurable dual
frequency tones that can be detected on VISM.
Parsed from file CISCO-WAN-VISM-TONE-PLAN-MIB.my.txt
Company: None
Module: CISCO-WAN-VISM-TONE-PLAN-MIB
This is the primary entry in the vismConfigToneDetectTable.
Each entry references a User configurable dual
frequency tones that can be detected on VISM.
vismConfigToneDetectEntry OBJECT-TYPE SYNTAX VismConfigToneDetectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the primary entry in the vismConfigToneDetectTable. Each entry references a User configurable dual frequency tones that can be detected on VISM. " INDEX { vismConfigToneDetectNum } ::= { vismConfigToneDetectTable 1 }
vismConfigToneDetectEntry OBJECT-TYPE SYNTAX VismConfigToneDetectEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the primary entry in the vismConfigToneDetectTable. Each entry references a User configurable dual frequency tones that can be detected on VISM. " INDEX { vismConfigToneDetectNum } ::= { vismConfigToneDetectTable 1 }
Vendor: Stratacom
Module: CISCO-WAN-VISM-TONE-PLAN-MIB
[Automatically extracted from oidview.com]
vismConfigToneDetectEntry OBJECT-TYPE SYNTAX VismConfigToneDetectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the primary entry in the vismConfigToneDetectTable. Each entry references a User configurable dual frequency tones that can be detected on VISM. " INDEX { vismConfigToneDetectNum } ::= { vismConfigToneDetectTable 1 }
vismConfigToneDetectEntry OBJECT-TYPE SYNTAX VismConfigToneDetectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the primary entry in the vismConfigToneDetectTable. Each entry references a User configurable dual frequency tones that can be detected on VISM. " INDEX { vismConfigToneDetectNum } ::= { vismConfigToneDetectTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.150.24.1.1.3.1.1.1 | vismConfigToneDetectNum | 0 | 0 | This is the index of this table. Currently only tones 1 to 10 are used and call agent can request up to ten tones to be detected … |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.2 | vismEventCode | 0 | 0 | This is the secondary index of this table. Call agent can request supervision tone detection indexed by this field. The values of… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.3 | vismConfigToneDetectRowStatus | 0 | 0 | Controls the creation and deletion of a Config Tone. An entry may be created using the 'createAndGo' option. When the row is succ… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.4 | vismFreqMaxDeviation | 0 | 0 | Specifies the maximum frequency deviation to be used by VISM when detecting a specific dual frequency tone. Please refer the VISM… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.5 | vismFreqMaxPower | 0 | 0 | Specifies the maximum frequency power to be used by VISM when detecting a specific dual frequency tone. Please refer the VISM conf… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.6 | vismFreqMinPower | 0 | 0 | Specifies the minimum frequency power to be used by VISM when detecting a specific dual frequency tone. Please refer the VISM conf… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.7 | vismFreqPowerTwist | 0 | 0 | Specifies the maximum frequency power twist permitted between the two frequencies used by VISM when detecting a dual frequency to… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.8 | vismFreqMaxDelay | 0 | 0 | Specifies the maximum frequency delay to be used by VISM when detecting a dual frequency tone. Please refer the VISM configuratio… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.9 | vismMinOnCadence | 0 | 0 | Specifies the minimum tone cycle ON time that is necessary for the VISM to detect the dual frequency tone. The vismMinOnCadence h… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.10 | vismMaxOffCadence | 0 | 0 | Specifies the maximum tone cycle OFF time that is necessary for the VISM to detect the dual frequency tone. The vismMaxOffCadence… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.11 | vismFreqNumOfCadenceMatch | 0 | 0 | Specifies the number of pairs of the dual frequency that needs to be detected. Currently ten pairs of frequency can be detected b… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.12 | vismFrequency1 | 0 | 0 | Specifies the 1st frequency component of the dual frequency to be detected by the VISM. |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.13 | vismFrequency2 | 0 | 0 | Specifies the 2nd frequency component of the dual frequency to be detected by the DSP. A value of 0 means this is a single freque… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.14 | vismFreqOnCadence | 0 | 0 | The On time in each cycle of the dual frequency to be detected by the DSP. The vismFreqOnCadence has to be less than vismMinOnCad… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.15 | vismFreqOffCadence | 0 | 0 | The Off time in each cycle of the dual frequency to be detected by the DSP. The vismFreqOffCadence should be lesser than the vism… |