This is the index of this table. Currently only
tones 1 to 10 are used and call agent can request up to
ten tones to be detected on different endpoints at
any point in time.
Parsed from file CISCO-WAN-VISM-TONE-PLAN-MIB.mib
Module: CISCO-WAN-VISM-TONE-PLAN-MIB
This is the index of this table. Currently only
tones 1 to 10 are used and call agent can request up to
ten tones to be detected on different endpoints at
any point in time.
This is the index of this table. Currently only
tones 1 to 10 are used and call agent can request up to
ten tones to be detected on different endpoints at
any point in time.
Parsed from file CISCO-WAN-VISM-TONE-PLAN-MIB.my.txt
Company: None
Module: CISCO-WAN-VISM-TONE-PLAN-MIB
This is the index of this table. Currently only
tones 1 to 10 are used and call agent can request up to
ten tones to be detected on different endpoints at
any point in time.
vismConfigToneDetectNum OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-only STATUS current DESCRIPTION "This is the index of this table. Currently only tones 1 to 10 are used and call agent can request up to ten tones to be detected on different endpoints at any point in time. " ::= { vismConfigToneDetectEntry 1 }
vismConfigToneDetectNum OBJECT-TYPE SYNTAX INTEGER(1..10) ACCESS read-only STATUS mandatory DESCRIPTION "This is the index of this table. Currently only tones 1 to 10 are used and call agent can request up to ten tones to be detected on different endpoints at any point in time. " ::= { vismConfigToneDetectEntry 1 }
Vendor: Stratacom
Module: CISCO-WAN-VISM-TONE-PLAN-MIB
[Automatically extracted from oidview.com]
vismConfigToneDetectNum OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-only STATUS current DESCRIPTION "This is the index of this table. Currently only tones 1 to 10 are used and call agent can request up to ten tones to be detected on different endpoints at any point in time. " ::= { vismConfigToneDetectEntry 1 }
vismConfigToneDetectNum OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-only STATUS current DESCRIPTION "This is the index of this table. Currently only tones 1 to 10 are used and call agent can request up to ten tones to be detected on different endpoints at any point in time. " ::= { vismConfigToneDetectEntry 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.150.24.1.1.3.1.1.2 | vismEventCode | 0 | 0 | This is the secondary index of this table. Call agent can request supervision tone detection indexed by this field. The values of… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.3 | vismConfigToneDetectRowStatus | 0 | 0 | Controls the creation and deletion of a Config Tone. An entry may be created using the 'createAndGo' option. When the row is succ… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.4 | vismFreqMaxDeviation | 0 | 0 | Specifies the maximum frequency deviation to be used by VISM when detecting a specific dual frequency tone. Please refer the VISM… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.5 | vismFreqMaxPower | 0 | 0 | Specifies the maximum frequency power to be used by VISM when detecting a specific dual frequency tone. Please refer the VISM conf… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.6 | vismFreqMinPower | 0 | 0 | Specifies the minimum frequency power to be used by VISM when detecting a specific dual frequency tone. Please refer the VISM conf… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.7 | vismFreqPowerTwist | 0 | 0 | Specifies the maximum frequency power twist permitted between the two frequencies used by VISM when detecting a dual frequency to… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.8 | vismFreqMaxDelay | 0 | 0 | Specifies the maximum frequency delay to be used by VISM when detecting a dual frequency tone. Please refer the VISM configuratio… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.9 | vismMinOnCadence | 0 | 0 | Specifies the minimum tone cycle ON time that is necessary for the VISM to detect the dual frequency tone. The vismMinOnCadence h… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.10 | vismMaxOffCadence | 0 | 0 | Specifies the maximum tone cycle OFF time that is necessary for the VISM to detect the dual frequency tone. The vismMaxOffCadence… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.11 | vismFreqNumOfCadenceMatch | 0 | 0 | Specifies the number of pairs of the dual frequency that needs to be detected. Currently ten pairs of frequency can be detected b… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.12 | vismFrequency1 | 0 | 0 | Specifies the 1st frequency component of the dual frequency to be detected by the VISM. |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.13 | vismFrequency2 | 0 | 0 | Specifies the 2nd frequency component of the dual frequency to be detected by the DSP. A value of 0 means this is a single freque… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.14 | vismFreqOnCadence | 0 | 0 | The On time in each cycle of the dual frequency to be detected by the DSP. The vismFreqOnCadence has to be less than vismMinOnCad… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.15 | vismFreqOffCadence | 0 | 0 | The Off time in each cycle of the dual frequency to be detected by the DSP. The vismFreqOffCadence should be lesser than the vism… |