This is the secondary index of this table. Call agent can
request supervision tone detection indexed by this field.
The values of event code are mapped from the subscriber
line event codes defined in RFC2833. Currently VISM supports
detection of only a handful of supervision tones like
Ringing, Busy, Dial-Tone and SIT tones.
Parsed from file CISCO-WAN-VISM-TONE-PLAN-MIB.mib
Module: CISCO-WAN-VISM-TONE-PLAN-MIB
This is the secondary index of this table. Call agent can
request supervision tone detection indexed by this field.
The values of event code are mapped from the subscriber
line event codes defined in RFC2833. Currently VISM supports
detection of only a handful of supervision tones like
Ringing, Busy, Dial-Tone and SIT tones.
This is the secondary index of this table. Call agent can
request supervision tone detection indexed by this field.
The values of event code are mapped from the subscriber
line event codes defined in RFC2833. Currently VISM supports
detection of only a handful of supervision tones like
Ringing, Busy, Dial-Tone and SIT tones.
Parsed from file CISCO-WAN-VISM-TONE-PLAN-MIB.my.txt
Company: None
Module: CISCO-WAN-VISM-TONE-PLAN-MIB
This is the secondary index of this table. Call agent can
request supervision tone detection indexed by this field.
The values of event code are mapped from the subscriber
line event codes defined in RFC2833. Currently VISM supports
detection of only a handful of supervision tones like
Ringing, Busy, Dial-Tone and SIT tones.
vismEventCode OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the secondary index of this table. Call agent can request supervision tone detection indexed by this field. The values of event code are mapped from the subscriber line event codes defined in RFC2833. Currently VISM supports detection of only a handful of supervision tones like Ringing, Busy, Dial-Tone and SIT tones. " ::= { vismConfigToneDetectEntry 2 }
vismEventCode OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This is the secondary index of this table. Call agent can request supervision tone detection indexed by this field. The values of event code are mapped from the subscriber line event codes defined in RFC2833. Currently VISM supports detection of only a handful of supervision tones like Ringing, Busy, Dial-Tone and SIT tones. " ::= { vismConfigToneDetectEntry 2 }
Vendor: Stratacom
Module: CISCO-WAN-VISM-TONE-PLAN-MIB
[Automatically extracted from oidview.com]
vismEventCode OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the secondary index of this table. Call agent can request supervision tone detection indexed by this field. The values of event code are mapped from the subscriber line event codes defined in RFC2833. Currently VISM supports detection of only a handful of supervision tones like Ringing, Busy, Dial-Tone and SIT tones. " ::= { vismConfigToneDetectEntry 2 }
vismEventCode OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the secondary index of this table. Call agent can request supervision tone detection indexed by this field. The values of event code are mapped from the subscriber line event codes defined in RFC2833. Currently VISM supports detection of only a handful of supervision tones like Ringing, Busy, Dial-Tone and SIT tones. " ::= { vismConfigToneDetectEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.150.24.1.1.3.1.1.1 | vismConfigToneDetectNum | 0 | 0 | This is the index of this table. Currently only tones 1 to 10 are used and call agent can request up to ten tones to be detected … |
| 1.3.6.1.4.1.351.150.24.1.1.3.1.1.3 | vismConfigToneDetectRowStatus | 0 | 0 | Controls the creation and deletion of a Config Tone. An entry may be created using the 'createAndGo' option. When the row is succ… |
| 1.3.6.1.4.1.351.150.24.1.1.3.1.1.4 | vismFreqMaxDeviation | 0 | 0 | Specifies the maximum frequency deviation to be used by VISM when detecting a specific dual frequency tone. Please refer the VISM… |
| 1.3.6.1.4.1.351.150.24.1.1.3.1.1.5 | vismFreqMaxPower | 0 | 0 | Specifies the maximum frequency power to be used by VISM when detecting a specific dual frequency tone. Please refer the VISM conf… |
| 1.3.6.1.4.1.351.150.24.1.1.3.1.1.6 | vismFreqMinPower | 0 | 0 | Specifies the minimum frequency power to be used by VISM when detecting a specific dual frequency tone. Please refer the VISM conf… |
| 1.3.6.1.4.1.351.150.24.1.1.3.1.1.7 | vismFreqPowerTwist | 0 | 0 | Specifies the maximum frequency power twist permitted between the two frequencies used by VISM when detecting a dual frequency to… |
| 1.3.6.1.4.1.351.150.24.1.1.3.1.1.8 | vismFreqMaxDelay | 0 | 0 | Specifies the maximum frequency delay to be used by VISM when detecting a dual frequency tone. Please refer the VISM configuratio… |
| 1.3.6.1.4.1.351.150.24.1.1.3.1.1.9 | vismMinOnCadence | 0 | 0 | Specifies the minimum tone cycle ON time that is necessary for the VISM to detect the dual frequency tone. The vismMinOnCadence h… |
| 1.3.6.1.4.1.351.150.24.1.1.3.1.1.10 | vismMaxOffCadence | 0 | 0 | Specifies the maximum tone cycle OFF time that is necessary for the VISM to detect the dual frequency tone. The vismMaxOffCadence… |
| 1.3.6.1.4.1.351.150.24.1.1.3.1.1.11 | vismFreqNumOfCadenceMatch | 0 | 0 | Specifies the number of pairs of the dual frequency that needs to be detected. Currently ten pairs of frequency can be detected b… |
| 1.3.6.1.4.1.351.150.24.1.1.3.1.1.12 | vismFrequency1 | 0 | 0 | Specifies the 1st frequency component of the dual frequency to be detected by the VISM. |
| 1.3.6.1.4.1.351.150.24.1.1.3.1.1.13 | vismFrequency2 | 0 | 0 | Specifies the 2nd frequency component of the dual frequency to be detected by the DSP. A value of 0 means this is a single freque… |
| 1.3.6.1.4.1.351.150.24.1.1.3.1.1.14 | vismFreqOnCadence | 0 | 0 | The On time in each cycle of the dual frequency to be detected by the DSP. The vismFreqOnCadence has to be less than vismMinOnCad… |
| 1.3.6.1.4.1.351.150.24.1.1.3.1.1.15 | vismFreqOffCadence | 0 | 0 | The Off time in each cycle of the dual frequency to be detected by the DSP. The vismFreqOffCadence should be lesser than the vism… |