Specifies the minimum tone cycle ON time that is
necessary for the VISM to detect the dual frequency
tone. The vismMinOnCadence has to be less than
vismFreqOnCadence value.
Please refer the VISM configuration guide for standard
values to be used for this field.
Parsed from file CISCO-WAN-VISM-TONE-PLAN-MIB.mib
Module: CISCO-WAN-VISM-TONE-PLAN-MIB
Specifies the minimum tone cycle ON time that is
necessary for the VISM to detect the dual frequency
tone. The vismMinOnCadence has to be less than
vismFreqOnCadence value.
Please refer the VISM configuration guide for standard
values to be used for this field.
Specifies the minimum tone cycle ON time that is
necessary for the VISM to detect the dual frequency
tone. The vismMinOnCadence has to be less than
vismFreqOnCadence value.
Please refer the VISM configuration guide for standard
values to be used for this field.
Parsed from file CISCO-WAN-VISM-TONE-PLAN-MIB.my.txt
Company: None
Module: CISCO-WAN-VISM-TONE-PLAN-MIB
Specifies the minimum tone cycle ON time that is
necessary for the VISM to detect the dual frequency
tone. The vismMinOnCadence has to be less than
vismFreqOnCadence value.
Please refer the VISM configuration guide for standard
values to be used for this field.
vismMinOnCadence OBJECT-TYPE SYNTAX Integer32 (3..100) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the minimum tone cycle ON time that is necessary for the VISM to detect the dual frequency tone. The vismMinOnCadence has to be less than vismFreqOnCadence value. Please refer the VISM configuration guide for standard values to be used for this field. " DEFVAL { 20 } ::= { vismConfigToneDetectEntry 9 }
vismMinOnCadence OBJECT-TYPE SYNTAX INTEGER(3..100) ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the minimum tone cycle ON time that is necessary for the VISM to detect the dual frequency tone. The vismMinOnCadence has to be less than vismFreqOnCadence value. Please refer the VISM configuration guide for standard values to be used for this field. " DEFVAL { 20 } ::= { vismConfigToneDetectEntry 9 }
Vendor: Stratacom
Module: CISCO-WAN-VISM-TONE-PLAN-MIB
[Automatically extracted from oidview.com]
vismMinOnCadence OBJECT-TYPE SYNTAX Integer32 (3..100) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the minimum tone cycle ON time that is necessary for the VISM to detect the dual frequency tone. The vismMinOnCadence has to be less than vismFreqOnCadence value. Please refer the VISM configuration guide for standard values to be used for this field. " DEFVAL { 20 } ::= { vismConfigToneDetectEntry 9 }
vismMinOnCadence OBJECT-TYPE SYNTAX Integer32 (3..100) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the minimum tone cycle ON time that is necessary for the VISM to detect the dual frequency tone. The vismMinOnCadence has to be less than vismFreqOnCadence value. Please refer the VISM configuration guide for standard values to be used for this field. " DEFVAL { 20 } ::= { vismConfigToneDetectEntry 9 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.150.24.1.1.3.1.1.1 | vismConfigToneDetectNum | 0 | 0 | This is the index of this table. Currently only tones 1 to 10 are used and call agent can request up to ten tones to be detected … |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.2 | vismEventCode | 0 | 0 | This is the secondary index of this table. Call agent can request supervision tone detection indexed by this field. The values of… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.3 | vismConfigToneDetectRowStatus | 0 | 0 | Controls the creation and deletion of a Config Tone. An entry may be created using the 'createAndGo' option. When the row is succ… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.4 | vismFreqMaxDeviation | 0 | 0 | Specifies the maximum frequency deviation to be used by VISM when detecting a specific dual frequency tone. Please refer the VISM… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.5 | vismFreqMaxPower | 0 | 0 | Specifies the maximum frequency power to be used by VISM when detecting a specific dual frequency tone. Please refer the VISM conf… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.6 | vismFreqMinPower | 0 | 0 | Specifies the minimum frequency power to be used by VISM when detecting a specific dual frequency tone. Please refer the VISM conf… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.7 | vismFreqPowerTwist | 0 | 0 | Specifies the maximum frequency power twist permitted between the two frequencies used by VISM when detecting a dual frequency to… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.8 | vismFreqMaxDelay | 0 | 0 | Specifies the maximum frequency delay to be used by VISM when detecting a dual frequency tone. Please refer the VISM configuratio… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.10 | vismMaxOffCadence | 0 | 0 | Specifies the maximum tone cycle OFF time that is necessary for the VISM to detect the dual frequency tone. The vismMaxOffCadence… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.11 | vismFreqNumOfCadenceMatch | 0 | 0 | Specifies the number of pairs of the dual frequency that needs to be detected. Currently ten pairs of frequency can be detected b… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.12 | vismFrequency1 | 0 | 0 | Specifies the 1st frequency component of the dual frequency to be detected by the VISM. |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.13 | vismFrequency2 | 0 | 0 | Specifies the 2nd frequency component of the dual frequency to be detected by the DSP. A value of 0 means this is a single freque… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.14 | vismFreqOnCadence | 0 | 0 | The On time in each cycle of the dual frequency to be detected by the DSP. The vismFreqOnCadence has to be less than vismMinOnCad… |
1.3.6.1.4.1.351.150.24.1.1.3.1.1.15 | vismFreqOffCadence | 0 | 0 | The Off time in each cycle of the dual frequency to be detected by the DSP. The vismFreqOffCadence should be lesser than the vism… |