stackUnitType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "This is an integer type identifier for this unit. The
values of this integer are administered by allocating a MIB object
identifier for each type of unit from a common branch. The value of this
object is then the last level in that identifier. The values are defined
in this MIB module. Note that the values are unlikely to be contiguous.
Note that if a type value is not available for this unit then this
object will return zero. There are several reasons why this value may
not be available through this view of the MIB. One reason may be that
the device is not currently active (dead) or that the information is
only available through the units own agent (see
stackUnitManagementType)."
View at oid-info.com
This is an integer type identifier for this unit. The values
of this integer are administered by allocating a MIB object identifier
for each type of unit from a common branch. The value of this object is
then the last level in that identifier. The values are defined in this
MIB module. Note that the values are unlikely to be contiguous.
Note that if a type value is not available for this unit then this
object will return zero. There are several reasons why this value may
not be available through this view of the MIB. One reason may be that
the device is not currently active (dead) or that the information is
only available through the units own agent (see stackUnitManagementType)
.
Parsed from file A3COM0017-STACK-CONFIG.mib.txt
Company: a3com
Module: A3COM0017-STACK-CONFIG
Automatically extracted from a file named S3M_AGENT
stackUnitType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is an integer type identifier for this unit. The values of this integer are administered by allocating a MIB object identifier for each type of unit from a common branch. The value of this object is then the last level in that identifier. The values are defined in this MIB module. Note that the values are unlikely to be contiguous. Note that if a type value is not available for this unit then this object will return zero. There are several reasons why this value may not be available through this view of the MIB. One reason may be that the device is not currently active (dead) or that the information is only available through the units own agent (see stackUnitManagementType) ." ::= {stackConfigEntry 4}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.10.27.1.1.1.1 | stackUnitLocation | 0 | 0 | Used to identify individual units in the stack. Note that this value will usually be contiguous, but that gaps may be present du… |
| 1.3.6.1.4.1.43.10.27.1.1.1.2 | stackUnitAddress | 0 | 0 | Every conformant unit in the SuperStack II system will have a unique physical (MAC) address by which it can be recognised. Note t… |
| 1.3.6.1.4.1.43.10.27.1.1.1.3 | stackUnitLastReset | 0 | 0 | This is the time in hundredths of a second, since this unit last reset (ie that units concept of sysUpTime). Note that if a unit… |
| 1.3.6.1.4.1.43.10.27.1.1.1.5 | stackUnitDesc | 0 | 0 | This is a text string which describes this unit. If a unit cannot provide a name then the value of this object will be an empty s… |
| 1.3.6.1.4.1.43.10.27.1.1.1.6 | stackUnitName | 0 | 0 | This is a simple text string which can be used by an application to assign a text name to a unit. By default this string is empty… |
| 1.3.6.1.4.1.43.10.27.1.1.1.7 | stackUnitState | 0 | 0 | This object represents the best known state of a unit in the stack. The unknown state is not expected to be used, but may exist b… |
| 1.3.6.1.4.1.43.10.27.1.1.1.8 | stackUnitManagementType | 0 | 0 | This object can be used to determine the management method used to access the agent in this unit. The options are: unknown: T… |
| 1.3.6.1.4.1.43.10.27.1.1.1.9 | stackUnitCapabilities | 0 | 0 | This object describes the capabilities of this particular unit. This is used in conjunction with the upgrade level of the stack t… |
| 1.3.6.1.4.1.43.10.27.1.1.1.10 | stackUnitPromVersion | 0 | 0 | This is the version number of the PROM on the unit. If the unit has no PROM, does not correctly report the PROM version or is cur… |
| 1.3.6.1.4.1.43.10.27.1.1.1.11 | stackUnitHWVersion | 0 | 0 | This is the hardware version of this unit, expressed as a string. Note that if the hardware version is not available for this par… |
| 1.3.6.1.4.1.43.10.27.1.1.1.12 | stackUnitSWVersion | 0 | 0 | This is the software version number of this unit. The software version number is a string. Note that if a unit does not make its … |
| 1.3.6.1.4.1.43.10.27.1.1.1.13 | stackUnitSerialNumber | 0 | 0 | This is the serial number for this unit. The number is globally unique and expressed as a textual string. |
| 1.3.6.1.4.1.43.10.27.1.1.1.14 | stackUnitAttention | 0 | 0 | Some of the units in the stack will contain a mechanism for drawing attention to that unit. This is useful for directing maintain… |
| 1.3.6.1.4.1.43.10.27.1.1.1.15 | stackUnitMgmtInterface | 0 | 0 | If a unit in the stack participates in the distributed SNMP stack then it will have an instance of this object (stackUnitManageme… |
| 1.3.6.1.4.1.43.10.27.1.1.1.16 | stackUnitSummary | 0 | 0 | stackUnitSummary OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This object provides a summary … |
| 1.3.6.1.4.1.43.10.27.1.1.1.17 | stackUnitSlipMgmtInterface | 0 | 0 | If a unit in the stack participates in the distributed SNMP stack then it will have an instance of this object (stackUnitManageme… |
| 1.3.6.1.4.1.43.10.27.1.1.1.18 | stackUnitNotepad | 0 | 0 | This object is used to store user-specified data regarding this unit. The user may store any relevant data about the unit. This… |
| 1.3.6.1.4.1.43.10.27.1.1.1.19 | stackUnitProductNumber | 0 | 0 | This is a textual representation of the unit's product number. Note that if a unit does not make its product number information a… |