stackUnitManagementType OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
distributed (2),
intelligent (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "This object can be used to determine the management
method used to access the agent in this unit. The options are:
unknown: The unit has not reported any
management capability. It is
either faulty or a non-conformant
device.
distributed: This unit can be managed using the
SuperStackII distributed management
architecture and so is managed
through this agent. The unit may
or may not have an active comms
stack. If it has then the addresses
for that agent can be determined
from the address table.
intelligent: The unit has its own SNMP agent
which is accessed seperately. The
agent is not part of the SSII
distributed management
architecture."
View at oid-info.com
This object can be used to determine the management method
used to access the agent in this unit. The options are:
unknown: The unit has not reported any management capability. It
is either faulty or a non-conformant device.
distributed: This unit can be managed using the SuperStackII
distributed management architecture and so is managed
through this agent. The unit may or may not have an
active comms stack. If it has then the addresses for
that agent can be determined from the address table.
intelligent: The unit has its own SNMP agent which is accessed
seperately. The agent is not part of the SSII
distributed management architecture.
Parsed from file A3COM0017-STACK-CONFIG.mib.txt
Company: a3com
Module: A3COM0017-STACK-CONFIG
Automatically extracted from a file named S3M_AGENT
stackUnitManagementType OBJECT-TYPE SYNTAX INTEGER { unknown (1), distributed (2), intelligent (3) } ACCESS read-only STATUS mandatory DESCRIPTION "This object can be used to determine the management method used to access the agent in this unit. The options are: unknown: The unit has not reported any management capability. It is either faulty or a non-conformant device. distributed: This unit can be managed using the SuperStackII distributed management architecture and so is managed through this agent. The unit may or may not have an active comms stack. If it has then the addresses for that agent can be determined from the address table. intelligent: The unit has its own SNMP agent which is accessed seperately. The agent is not part of the SSII distributed management architecture." ::= {stackConfigEntry 8}
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.43.10.27.1.1.1.1 | stackUnitLocation | 0 | 0 | Used to identify individual units in the stack. Note that this value will usually be contiguous, but that gaps may be present du… |
1.3.6.1.4.1.43.10.27.1.1.1.2 | stackUnitAddress | 0 | 0 | Every conformant unit in the SuperStack II system will have a unique physical (MAC) address by which it can be recognised. Note t… |
1.3.6.1.4.1.43.10.27.1.1.1.3 | stackUnitLastReset | 0 | 0 | This is the time in hundredths of a second, since this unit last reset (ie that units concept of sysUpTime). Note that if a unit… |
1.3.6.1.4.1.43.10.27.1.1.1.4 | stackUnitType | 0 | 0 | This is an integer type identifier for this unit. The values of this integer are administered by allocating a MIB object identif… |
1.3.6.1.4.1.43.10.27.1.1.1.5 | stackUnitDesc | 0 | 0 | This is a text string which describes this unit. If a unit cannot provide a name then the value of this object will be an empty s… |
1.3.6.1.4.1.43.10.27.1.1.1.6 | stackUnitName | 0 | 0 | This is a simple text string which can be used by an application to assign a text name to a unit. By default this string is empty… |
1.3.6.1.4.1.43.10.27.1.1.1.7 | stackUnitState | 0 | 0 | This object represents the best known state of a unit in the stack. The unknown state is not expected to be used, but may exist b… |
1.3.6.1.4.1.43.10.27.1.1.1.9 | stackUnitCapabilities | 0 | 0 | This object describes the capabilities of this particular unit. This is used in conjunction with the upgrade level of the stack t… |
1.3.6.1.4.1.43.10.27.1.1.1.10 | stackUnitPromVersion | 0 | 0 | This is the version number of the PROM on the unit. If the unit has no PROM, does not correctly report the PROM version or is cur… |
1.3.6.1.4.1.43.10.27.1.1.1.11 | stackUnitHWVersion | 0 | 0 | This is the hardware version of this unit, expressed as a string. Note that if the hardware version is not available for this par… |
1.3.6.1.4.1.43.10.27.1.1.1.12 | stackUnitSWVersion | 0 | 0 | This is the software version number of this unit. The software version number is a string. Note that if a unit does not make its … |
1.3.6.1.4.1.43.10.27.1.1.1.13 | stackUnitSerialNumber | 0 | 0 | This is the serial number for this unit. The number is globally unique and expressed as a textual string. |
1.3.6.1.4.1.43.10.27.1.1.1.14 | stackUnitAttention | 0 | 0 | Some of the units in the stack will contain a mechanism for drawing attention to that unit. This is useful for directing maintain… |
1.3.6.1.4.1.43.10.27.1.1.1.15 | stackUnitMgmtInterface | 0 | 0 | If a unit in the stack participates in the distributed SNMP stack then it will have an instance of this object (stackUnitManageme… |
1.3.6.1.4.1.43.10.27.1.1.1.16 | stackUnitSummary | 0 | 0 | stackUnitSummary OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This object provides a summary … |
1.3.6.1.4.1.43.10.27.1.1.1.17 | stackUnitSlipMgmtInterface | 0 | 0 | If a unit in the stack participates in the distributed SNMP stack then it will have an instance of this object (stackUnitManageme… |
1.3.6.1.4.1.43.10.27.1.1.1.18 | stackUnitNotepad | 0 | 0 | This object is used to store user-specified data regarding this unit. The user may store any relevant data about the unit. This… |
1.3.6.1.4.1.43.10.27.1.1.1.19 | stackUnitProductNumber | 0 | 0 | This is a textual representation of the unit's product number. Note that if a unit does not make its product number information a… |