stackUnitState OBJECT-TYPE
SYNTAX INTEGER {
unitStateUnknown (1),
unitInactive (2),
unitOperational (3),
unitLoading (4),
unitAwaitReset (5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "This object represents the best known state of a unit
in the stack. The unknown state is not expected to be used, but
may exist because of loosely integrated components in the stack.
Management applications MUST EXPECT to see the unknown value.
The other states are as follows:
unitInactive: The device appears to be in the stack but does not
appear to be in an operational state.
unitOperational: The unit is sending out periodic identification
messages and indicates that it is operational, running its
complete image.
unitLoading: The unit is running in a special operational mode
which means that it is unmanaged while it loads a new
operational code image.
unitAwaitReset: The unit has accomplished a successful software
upgrade and is waiting for the remaining units in the stack to
successfully complete their upgrades and enter this state before
resetting the system. If any unit transitions from unitLoading
to any other state than unitAwaitReset, then the units in the
unitAwaitReset state will not reset and will transition to
unitOperational. Implementations of this object that do not
synchronize stack-wide resets after software upgrades will reset
immediately after the unitLoading state is completed and never
transition to unitAwaitReset."
View at oid-info.com
This object represents the best known state of a unit in the
stack. The unknown state is not expected to be used, but may exist
because of loosely integrated components in the stack. Management
applications MUST EXPECT to see the 'unknown' value. The other states
are as follows:
unitInactive: The device has failed to respond send out periodic update
messages, but it still appears to be in the stack.
unitOperational: The unit is sending our periodic identification
messages and indicates that it is operational, running its complete
image.
unitLoading: The unit is running is a special operational mode which
means that it is unmanaged while it loads a new operational code image.
Note that if the stack ever contains units which can download an
operational image while still being fully managed then this variable
will report 'unitOperational'.
Parsed from file A3COM0017-STACK-CONFIG.mib.txt
Company: a3com
Module: A3COM0017-STACK-CONFIG
Automatically extracted from a file named S3M_AGENT
stackUnitState OBJECT-TYPE SYNTAX INTEGER { unitStateUnknown (1), unitInactive (2), unitOperational (3), unitLoading (4) } ACCESS read-only STATUS mandatory DESCRIPTION "This object represents the best known state of a unit in the stack. The unknown state is not expected to be used, but may exist because of loosely integrated components in the stack. Management applications MUST EXPECT to see the 'unknown' value. The other states are as follows: unitInactive: The device has failed to respond send out periodic update messages, but it still appears to be in the stack. unitOperational: The unit is sending our periodic identification messages and indicates that it is operational, running its complete image. unitLoading: The unit is running is a special operational mode which means that it is unmanaged while it loads a new operational code image. Note that if the stack ever contains units which can download an operational image while still being fully managed then this variable will report 'unitOperational'." ::= {stackConfigEntry 7}
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.43.10.27.1.1.1.1 | stackUnitLocation | 0 | 0 | Used to identify individual units in the stack. Note that this value will usually be contiguous, but that gaps may be present du… |
1.3.6.1.4.1.43.10.27.1.1.1.2 | stackUnitAddress | 0 | 0 | Every conformant unit in the SuperStack II system will have a unique physical (MAC) address by which it can be recognised. Note t… |
1.3.6.1.4.1.43.10.27.1.1.1.3 | stackUnitLastReset | 0 | 0 | This is the time in hundredths of a second, since this unit last reset (ie that units concept of sysUpTime). Note that if a unit… |
1.3.6.1.4.1.43.10.27.1.1.1.4 | stackUnitType | 0 | 0 | This is an integer type identifier for this unit. The values of this integer are administered by allocating a MIB object identif… |
1.3.6.1.4.1.43.10.27.1.1.1.5 | stackUnitDesc | 0 | 0 | This is a text string which describes this unit. If a unit cannot provide a name then the value of this object will be an empty s… |
1.3.6.1.4.1.43.10.27.1.1.1.6 | stackUnitName | 0 | 0 | This is a simple text string which can be used by an application to assign a text name to a unit. By default this string is empty… |
1.3.6.1.4.1.43.10.27.1.1.1.8 | stackUnitManagementType | 0 | 0 | This object can be used to determine the management method used to access the agent in this unit. The options are: unknown: T… |
1.3.6.1.4.1.43.10.27.1.1.1.9 | stackUnitCapabilities | 0 | 0 | This object describes the capabilities of this particular unit. This is used in conjunction with the upgrade level of the stack t… |
1.3.6.1.4.1.43.10.27.1.1.1.10 | stackUnitPromVersion | 0 | 0 | This is the version number of the PROM on the unit. If the unit has no PROM, does not correctly report the PROM version or is cur… |
1.3.6.1.4.1.43.10.27.1.1.1.11 | stackUnitHWVersion | 0 | 0 | This is the hardware version of this unit, expressed as a string. Note that if the hardware version is not available for this par… |
1.3.6.1.4.1.43.10.27.1.1.1.12 | stackUnitSWVersion | 0 | 0 | This is the software version number of this unit. The software version number is a string. Note that if a unit does not make its … |
1.3.6.1.4.1.43.10.27.1.1.1.13 | stackUnitSerialNumber | 0 | 0 | This is the serial number for this unit. The number is globally unique and expressed as a textual string. |
1.3.6.1.4.1.43.10.27.1.1.1.14 | stackUnitAttention | 0 | 0 | Some of the units in the stack will contain a mechanism for drawing attention to that unit. This is useful for directing maintain… |
1.3.6.1.4.1.43.10.27.1.1.1.15 | stackUnitMgmtInterface | 0 | 0 | If a unit in the stack participates in the distributed SNMP stack then it will have an instance of this object (stackUnitManageme… |
1.3.6.1.4.1.43.10.27.1.1.1.16 | stackUnitSummary | 0 | 0 | stackUnitSummary OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This object provides a summary … |
1.3.6.1.4.1.43.10.27.1.1.1.17 | stackUnitSlipMgmtInterface | 0 | 0 | If a unit in the stack participates in the distributed SNMP stack then it will have an instance of this object (stackUnitManageme… |
1.3.6.1.4.1.43.10.27.1.1.1.18 | stackUnitNotepad | 0 | 0 | This object is used to store user-specified data regarding this unit. The user may store any relevant data about the unit. This… |
1.3.6.1.4.1.43.10.27.1.1.1.19 | stackUnitProductNumber | 0 | 0 | This is a textual representation of the unit's product number. Note that if a unit does not make its product number information a… |