Objects in this group of conditions are related to testing or test
events. This object is never active.
Parsed from file LIEBERT_GP_COND.MIB.txt
Company: liebert
Module: LIEBERT-GP-CONDITIONS-MIB
Vendor: Liebert
Module: LIEBERT-GP-CONDITIONS-MIB (LIEBERT_GP_COND.MIB)
Type: OBJ IDENTITY
Access:
Syntax:
Automatically extracted from www.mibdepot.com
lgpConditionTestGroup OBJECT-IDENTITY STATUS current DESCRIPTION "Objects in this group of conditions are related to testing or test events. This object is never active." ::= { lgpConditionsWellKnown 188 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.476.1.42.3.2.1.188.5 | lgpConditionTest01 | 0 | 0 | This is a 'test' condition. It is a generic test event that can be utilized to evaluate system handling of events. Some produc… |
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.476.1.42.3.2.1.138 | lgpConditionSleepModeOff | 0 | 0 | The system sleep mode operation has been turned off. |
| 1.3.6.1.4.1.476.1.42.3.2.1.139 | lgpConditionPowerOn | 0 | 0 | The system power is on. |
| 1.3.6.1.4.1.476.1.42.3.2.1.140 | lgpConditionSystemOnStanby | 0 | 0 | The system is on standby. |
| 1.3.6.1.4.1.476.1.42.3.2.1.141 | lgpConditionPowerOff | 0 | 0 | The system power is off. |
| 1.3.6.1.4.1.476.1.42.3.2.1.142 | lgpConditionHighTemperatureGroup | 5 | 5 | lgpConditionHightemperatureGroup |
| 1.3.6.1.4.1.476.1.42.3.2.1.143 | lgpConditionLowTemperatureGroup | 2 | 2 | The system has detected a low temperature condition. This group contains various low temperature conditions. |
| 1.3.6.1.4.1.476.1.42.3.2.1.144 | lgpConditionHighHumidityGroup | 1 | 1 | The system has detected a high humidity condition. This group contains various high humidity conditions. |
| 1.3.6.1.4.1.476.1.42.3.2.1.145 | lgpConditionLowHumidityGroup | 1 | 1 | The system has detected a low humidity condition. This group contains various high humidity conditions. |
| 1.3.6.1.4.1.476.1.42.3.2.1.146 | lgpConditionPeerNetworkNoMaster | 0 | 0 | The system is unable to communicate with the master on the peer to peer network. |
| 1.3.6.1.4.1.476.1.42.3.2.1.147 | lgpConditionNoOnOffPermissions | 0 | 0 | The system lacks the permissions to execute the on/off operation. |
| 1.3.6.1.4.1.476.1.42.3.2.1.148 | lgpConditionPeerNetworkFailure | 0 | 0 | The system has detected a communication failure on the peer to peer network. |
| 1.3.6.1.4.1.476.1.42.3.2.1.149 | lgpConditionUnitDisabled | 0 | 0 | The unit is disabled. |
| 1.3.6.1.4.1.476.1.42.3.2.1.150 | lgpConditionUnitShutdown | 0 | 0 | The system has shutdown. |
| 1.3.6.1.4.1.476.1.42.3.2.1.151 | lgpConditionPeerNetworkDiscovered | 0 | 0 | The system has established communications on the peer to peer network. |
| 1.3.6.1.4.1.476.1.42.3.2.1.152 | lgpConditionLossOfWaterFlow | 0 | 0 | The system has detected a loss of water flow condition. |
| 1.3.6.1.4.1.476.1.42.3.2.1.153 | lgpConditionCondensatePumpHighWater | 0 | 0 | The system has detected high water in the condensate pump. |
| 1.3.6.1.4.1.476.1.42.3.2.1.154 | lgpConditionGeneralAlarm | 0 | 0 | The system has detected a general alarm condition. |
| 1.3.6.1.4.1.476.1.42.3.2.1.155 | lgpConditionProductSpecific | 0 | 0 | The system has detected a product specific condition. This condition is not currently available via the agent card. |
| 1.3.6.1.4.1.476.1.42.3.2.1.156 | lgpConditionReheatLockout | 0 | 0 | The system has locked out the electrical reheat operation for a specified amount of time. |
| 1.3.6.1.4.1.476.1.42.3.2.1.157 | lgpConditionHumidifierLockout | 0 | 0 | The system has locked out the humidifier operation for a specified amount of time. |
| 1.3.6.1.4.1.476.1.42.3.2.1.158 | lgpConditionCompressorsLockout | 0 | 0 | The system has locked out compressor operation for a specified amount of time. |
| 1.3.6.1.4.1.476.1.42.3.2.1.159 | lgpConditionCallService | 0 | 0 | The system has detected a condition that requires a service representative be contacted. |
| 1.3.6.1.4.1.476.1.42.3.2.1.160 | lgpConditionLowMemoryGroup | 1 | 1 | This group contains various low memory conditions. |
| 1.3.6.1.4.1.476.1.42.3.2.1.161 | lgpConditionMemoryFailureGroup | 2 | 2 | This group contains various memory device failure conditions. |
| 1.3.6.1.4.1.476.1.42.3.2.1.162 | lgpConditionUnitCodeErrorGroup | 19 | 19 | This group contains various memory device failure conditions. |
| 1.3.6.1.4.1.476.1.42.3.2.1.163 | lgpConditionHighExternalDewPoint | 0 | 0 | The system has detected a high external dew point condition. The room dew point has exceeded the specified threshold. |
| 1.3.6.1.4.1.476.1.42.3.2.1.164 | lgpConditionHcbDisconnected | 0 | 0 | The system has detected the humidifier control board is disconnected or not installed. |
| 1.3.6.1.4.1.476.1.42.3.2.1.165 | lgpConditionBmsResetTimerExpired | 0 | 0 | The BMS fan speed control reset counter has timed out. |
| 1.3.6.1.4.1.476.1.42.3.2.1.166 | lgpConditionAgentFirmwareCorrupt | 0 | 0 | The firmware update to the agent card has failed and the firmware is now corrupt. |
| 1.3.6.1.4.1.476.1.42.3.2.1.175 | lgpConditionSystemAccessGroup | 2 | 2 | This group contains various system access conditions. An examples is an open access panel. |
| 1.3.6.1.4.1.476.1.42.3.2.1.176 | lgpConditionsDamperFailure | 1 | 1 | This group contains various damper failure conditions. |
| 1.3.6.1.4.1.476.1.42.3.2.1.177 | lgpConditionRemoteShutdown | 0 | 0 | A remote shutdown occurred. |
| 1.3.6.1.4.1.476.1.42.3.2.1.178 | lgpConditionFireAlarm | 0 | 0 | Fire Alarm. |
| 1.3.6.1.4.1.476.1.42.3.2.1.179 | lgpConditionHeatersOverheated | 0 | 0 | Heaters Overheated. |
| 1.3.6.1.4.1.476.1.42.3.2.1.180 | lgpConditionCondenserFailureGroup | 2 | 2 | This group contains condenser failure conditions. |
| 1.3.6.1.4.1.476.1.42.3.2.1.181 | lgpConditionHumidifierCyclinderWorn | 0 | 0 | The system has detected the humidifier cylinder is worn. |
| 1.3.6.1.4.1.476.1.42.3.2.1.182 | lgpConditionUnderCurrent | 2 | 2 | The system has detected a low current condition. The current of one or more sources in the system has fallen below a threshold … |
| 1.3.6.1.4.1.476.1.42.3.2.1.183 | lgpConditionHeatRejectorGroup | 2 | 2 | This group contains failure conditions for the heat rejection unit. |
| 1.3.6.1.4.1.476.1.42.3.2.1.184 | lgpConditionFreeCoolLockout | 0 | 0 | The free cooling capability has been disabled. |
| 1.3.6.1.4.1.476.1.42.3.2.1.185 | lgpConditionWaterLeakSensorFailure | 0 | 0 | The sensor used to detect water leaks is not connected or has failed. |
| 1.3.6.1.4.1.476.1.42.3.2.1.186 | lgpConditionNoLoadDetectedWarning | 0 | 0 | There is no load detected on the output. This can be an indication that the output is being powered by an external bypass sourc… |
| 1.3.6.1.4.1.476.1.42.3.2.1.187 | lgpConditionFirmwareGroup | 1 | 1 | Grouping level for firmware related conditions. |
| 1.3.6.1.4.1.476.1.42.3.2.1.190 | lgpConditionReceptacleBranchGroup | 2 | 2 | Grouping level for receptacle branch conditions. |
| 1.3.6.1.4.1.476.1.42.3.2.1.192 | lgpConditionInputUnqualified | 0 | 0 | The input is not qualified to provide power to the system. This may be due to system input over-voltage, system input under-vol… |
| 1.3.6.1.4.1.476.1.42.3.2.1.193 | lgpConditionBypassUnavailable | 0 | 0 | This summary event is asserted when the bypass is not available. Possible causes include: Bypass Sync Error, Bypass Line Fail, B… |
| 1.3.6.1.4.1.476.1.42.3.2.1.194 | lgpConditionAutoTransferFailed | 0 | 0 | The system is failing to automatically transfer the load to the alternate source. |
| 1.3.6.1.4.1.476.1.42.3.2.1.195 | lgpConditionSBSUnavailable | 0 | 0 | A Static Bypass Switch (SBS) Failure has been detected. Possible causes include: SBS Phase Open, SBS SCR (Silicon Controlled Rec… |
| 1.3.6.1.4.1.476.1.42.3.2.1.196 | lgpConditionSBSOverload | 0 | 0 | On at least one phase of the static bypass switch (SBS), the power dissapation limit has been exceeded. |
| 1.3.6.1.4.1.476.1.42.3.2.1.197 | lgpConditionExcessPulseParallel | 0 | 0 | The system has performed too many pulse parallel operations within the specified time interval. A pulse parallel operation is a… |
| 1.3.6.1.4.1.476.1.42.3.2.1.198 | lgpConditionRemoteBypassSwitchOffExt | 0 | 0 | The static bypass switch is off due to the state of an external signal. |
| 1.3.6.1.4.1.476.1.42.3.2.1.199 | lgpConditionManTransferInhibited | 0 | 0 | Manual transfer from inverter to bypass is inhibited. Bypass is not qualified. |
| 1.3.6.1.4.1.476.1.42.3.2.1.200 | lgpConditionManReTransferInhibited | 0 | 0 | Manual retransfer from bypass to inverter is inhibited. |
| 1.3.6.1.4.1.476.1.42.3.2.1.201 | lgpConditionBatteryChargeError | 0 | 0 | The battery is not charging properly. Some reasons for this condition include, but are not limited to: battery charger failure, b… |
| 1.3.6.1.4.1.476.1.42.3.2.1.202 | lgpConditionBatteryAutoTestInhibited | 0 | 0 | Automatic (scheduled) battery tests are inhibited. |
| 1.3.6.1.4.1.476.1.42.3.2.1.203 | lgpConditionBatteryChargeReducedExt | 0 | 0 | A reduced battery charging algorithm is being used due to an external signal. |
| 1.3.6.1.4.1.476.1.42.3.2.1.204 | lgpConditionBatteryCapacityLow | 0 | 0 | The battery capacity is low. Some reasons for this condition include, but are not limited to: a battery is offline, the battery … |
| 1.3.6.1.4.1.476.1.42.3.2.1.205 | lgpConditionBatteryTempImbalance | 0 | 0 | The temperature difference between two batteries in the system exceeds the predefined threshold. |
| 1.3.6.1.4.1.476.1.42.3.2.1.206 | lgpConditionBatteryEqualize | 0 | 0 | The rectifier output voltage has been increased to equalize the battery voltage level. |
| 1.3.6.1.4.1.476.1.42.3.2.1.207 | lgpConditionBatteryChargeInhibitedExt | 0 | 0 | Battery charging is inhibited due to an external inhibit signal. |
| 1.3.6.1.4.1.476.1.42.3.2.1.208 | lgpConditionServiceExtBatteryMonitorGroup | 2 | 2 | This group contains battery monitor service conditions. |
| 1.3.6.1.4.1.476.1.42.3.2.1.209 | lgpConditionBatteryGroundFault | 0 | 0 | Battery system ground fault amperage exceeds the threshold. |
| 1.3.6.1.4.1.476.1.42.3.2.1.210 | lgpConditionBatteryLowShutdown | 0 | 0 | With the battery breaker closed, the battery voltage has dropped below the calculated End-Of-Discharge (EOD) limit. |
| 1.3.6.1.4.1.476.1.42.3.2.1.211 | lgpConditionEmergencyPowerOffLocal | 0 | 0 | The system has detected an Emergency Power Off (EPO) condition. The local EPO switch has cut off the power source to the system. |
| 1.3.6.1.4.1.476.1.42.3.2.1.212 | lgpConditionOutputLowPFLagging | 0 | 0 | The system has detected a lagging output power factor below the threshold, resulting in reduced load capacity. |
| 1.3.6.1.4.1.476.1.42.3.2.1.213 | lgpConditionOutputLowPFLeading | 0 | 0 | The system has detected a leading output power factor below the threshold, resulting in reduced load capacity. |
| 1.3.6.1.4.1.476.1.42.3.2.1.214 | lgpConditionOutputToLoadFault | 0 | 0 | The system has detected an output to load fault. This could be caused by over or under voltage, or by over or under frequency. |
| 1.3.6.1.4.1.476.1.42.3.2.1.215 | lgpConditionInvRestartInhibitedExt | 0 | 0 | Restart of the inverter is inhibited by an external signal. |
| 1.3.6.1.4.1.476.1.42.3.2.1.216 | lgpConditionInverterShutdownOverload | 0 | 0 | The system has shutdown the inverter due to a sustained overload. This event does not indicate if the load has been dropped or tr… |
| 1.3.6.1.4.1.476.1.42.3.2.1.217 | lgpConditionInverterOffExt | 0 | 0 | The inverter is off due to the state of an external signal. |
| 1.3.6.1.4.1.476.1.42.3.2.1.218 | lgpConditionInputContactGroup | 16 | 16 | The system has detected an active input contact. |
| 1.3.6.1.4.1.476.1.42.3.2.1.219 | lgpConditionRectifierOperInhibited | 0 | 0 | None |
| 1.3.6.1.4.1.476.1.42.3.2.1.220 | lgpConditionBypassBackFeedBrkrOpen | 0 | 0 | The bypass backfeed breaker is in the open position. |
| 1.3.6.1.4.1.476.1.42.3.2.1.221 | lgpConditionAutoRestartInProgress | 0 | 0 | Auto restart is in progress. Becomes inactive when auto restart completes or fails. |
| 1.3.6.1.4.1.476.1.42.3.2.1.222 | lgpConditionAutoRestartInhibitedExt | 0 | 0 | Auto restart is inhibited due to an external signal. |
| 1.3.6.1.4.1.476.1.42.3.2.1.223 | lgpConditionAutoRestartFailed | 0 | 0 | Auto restart has failed. |
| 1.3.6.1.4.1.476.1.42.3.2.1.224 | lgpConditionInputOnGenerator | 0 | 0 | A generator is supplying the power to the system. |
| 1.3.6.1.4.1.476.1.42.3.2.1.225 | lgpConditionInputFilterCycleLock | 0 | 0 | The input filter disconnect has opened too many times within a given period of time. |
| 1.3.6.1.4.1.476.1.42.3.2.1.226 | lgpConditionServiceCodeActive | 0 | 0 | The system is in an operational mode intended for testing. In normal operating conditions, the system should not be in this sta… |
| 1.3.6.1.4.1.476.1.42.3.2.1.227 | lgpConditionLoadBusSyncActive | 0 | 0 | Load Bus Sync Operation is active. This synchronizes the UPS output with the output of another UPS. |
| 1.3.6.1.4.1.476.1.42.3.2.1.228 | lgpConditionLoadBusSyncInhibited | 0 | 0 | The system has detected that conditions to perform Load Bus Sync Operation are not satisfied. |
| 1.3.6.1.4.1.476.1.42.3.2.1.229 | lgpConditionControlsResetRequired | 0 | 0 | A controls reset is required because one or more critical settings have changed. |
| 1.3.6.1.4.1.476.1.42.3.2.1.230 | lgpConditionEquipTempSensorFailed | 0 | 0 | A temperature sensor is reporting a value outside the bounds of a properly operating sensor. |
| 1.3.6.1.4.1.476.1.42.3.2.1.231 | lgpConditionInputCurrentImbalance | 0 | 0 | The current on one input phase is much greater or lower than the average current of all the phases. This may indicate improper o… |
| ... | ||||