This option sets the print engine's default resolution.
Choices
300 dpi-300x300 dpi resolution
600 dpi-600x600 dpi resolution
1200 dpi-1200x1200 dpi resolution
2400 dpi-2400x600 dpi resolution
Default
600 dpi
Note: The 1200x1200 dpi resolution option is
available only when the optional 1200x1200 dpi
daughterboard is installed. See your Minolta-QMS
product supplier for availability of this option.
If your printer is configured for duplex printing and has
less than 16 MB RAM, 600x600 dpi isn't available on all
media sizes. Duplexing using 600x600 or 1200x1200
resolution requires additional memory.
The 1200 dpi option will not show up in this menu until
the multires board is installed and the frame buffer has
sufficient memory to support 1200 dpi. Restoring
defaults or selecting Quick Config should re-configure
the frame buffer memory client
The 2400 dpi option is specific to certain products only.
We do not need multi-res board. Currently only 2400x600
is supported. Duplexing needs additional memory.
Parsed from file QMS-MIB.mib
Module: QMS-MIB
Vendor: QMS, Inc.
Module: QMS-MIB
[Automatically extracted from oidview.com]
qmsENGResolution OBJECT-TYPE SYNTAX INTEGER { dpi300(301), dpi600(601), dpi1200(1201), dpi2401(2401) } ACCESS read-write STATUS mandatory DESCRIPTION "This option sets the print engine's default resolution. Choices 300 dpi-300x300 dpi resolution 600 dpi-600x600 dpi resolution 1200 dpi-1200x1200 dpi resolution 2400 dpi-2400x600 dpi resolution Default 600 dpi Note: The 1200x1200 dpi resolution option is available only when the optional 1200x1200 dpi daughterboard is installed. See your Minolta-QMS product supplier for availability of this option. If your printer is configured for duplex printing and has less than 16 MB RAM, 600x600 dpi isn't available on all media sizes. Duplexing using 600x600 or 1200x1200 resolution requires additional memory. The 1200 dpi option will not show up in this menu until the multires board is installed and the frame buffer has sufficient memory to support 1200 dpi. Restoring defaults or selecting Quick Config should re-configure the frame buffer memory client The 2400 dpi option is specific to certain products only. We do not need multi-res board. Currently only 2400x600 is supported. Duplexing needs additional memory." ::= { qmsEngine 8 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.480.1.304.1 | qmsENGTopOffset | 0 | 0 | This option allows you to adjust the vertical placement of printed images. To check image alignment, print a standard status pag… |
1.3.6.1.4.1.480.1.304.2 | qmsENGLeftOffset | 0 | 0 | This option allows you to adjust the horizontal placement of printed images. To check image alignment, print a standard status pa… |
1.3.6.1.4.1.480.1.304.4 | qmsENGTopOffsetDuplex | 0 | 0 | This option allows you to adjust the duplex vertical placement of printed images. To check image alignment, print a standard sta… |
1.3.6.1.4.1.480.1.304.6 | qmsENGLeftOffsetDuplex | 0 | 0 | This option allows you to adjust the duplex horizontal placement of printed images. To check image alignment, print a standard st… |
1.3.6.1.4.1.480.1.304.11 | qmsENGDefaultPaper | 0 | 0 | Default Paper is used when the default media is requested but the default input bin is missing from the engine. There's no way t… |
1.3.6.1.4.1.480.1.304.12 | qmsENGDuplex | 0 | 0 | Current duplexing setting on printers for which the feature is supported. Choices Off: Prints simplex pages. Long Edge: … |
1.3.6.1.4.1.480.1.304.14 | qmsENGOrientation | 0 | 0 | While you can usually specify the orientation of a print job in your application, if you consistently use a certain media orient… |
1.3.6.1.4.1.480.1.304.15 | qmsENGInputbin | 0 | 0 | Default inputbin number. |
1.3.6.1.4.1.480.1.304.16 | qmsENGOutputbin | 0 | 0 | Default outputbin number. |
1.3.6.1.4.1.480.1.304.17 | qmsENGCollation | 0 | 0 | Collation is one of your printer's features. It is the printing of sets of multiple copies of a document in numeric order. Your … |
1.3.6.1.4.1.480.1.304.19 | qmsENGErrorRecovery | 0 | 0 | When a media jam or other similar error occurs, the printer can reprint the job starting from the page on which the jam occurred… |
1.3.6.1.4.1.480.1.304.20 | qmsENGManualTrayMedia | 0 | 0 | Need description and values. |
1.3.6.1.4.1.480.1.304.21 | qmsENGToneroutAction | 0 | 0 | You can configure the printer to stop or to continue printing when a TONER LOW ACT. error message is displayed in the message wi… |
1.3.6.1.4.1.480.1.304.23 | qmsENGLetterheadMode | 0 | 0 | This option appears only if the duplexing unit is installed on the printer. The letterhead option allows you to print both simple… |
1.3.6.1.4.1.480.1.304.24 | qmsENGManualFeedTimeout | 0 | 0 | This option allows you to set the amount of time the printer waits for paper to be inserted into the multipurpose tray before it… |
1.3.6.1.4.1.480.1.304.26 | qmsENGOffsetStacking | 0 | 0 | This option appears only if the printer is capable of offset stacking. Choices: Off - Stacking of each output set is aligned with… |
1.3.6.1.4.1.480.1.304.27 | qmsENGEnergyStar | 0 | 0 | The Energy Saver option specifies whether the printer changes to a low-power state (the engine remains on, but the fuser turns o… |
1.3.6.1.4.1.480.1.304.40 | qmsENGPageOrder | 0 | 0 | Need input on this....is this new? |
1.3.6.1.4.1.480.1.304.41 | qmsENGEnvelopeTrayMedia | 0 | 0 | The envelope feeder can be adjusted to accept different envelope sizes. See chapter 7, of the Options manual, the 'Selecting Env… |
1.3.6.1.4.1.480.1.304.42 | qmsENGDensity | 0 | 0 | The Toner Density option adjusts the density of the toner that is laid down on the paper. Note: See your Minolta-QMS documentation… |
1.3.6.1.4.1.480.1.304.43 | qmsENGColorModel | 0 | 0 | Use this option to select between full-color and monochrome printing. Choices Gray, CMY, RGB, CMYK |
1.3.6.1.4.1.480.1.304.44 | qmsENGColorSeparation | 0 | 0 | Use this option to turn color separation on or off. Choices On, Off Default Off |
1.3.6.1.4.1.480.1.304.45 | qmsENGUnderColor | 0 | 0 | Need input on this....is this new? |
1.3.6.1.4.1.480.1.304.48 | qmsENGQuality | 0 | 0 | The Print Quality option allows the printer to operate at a lower rate of toner consumption and extend the life of your toner ca… |
1.3.6.1.4.1.480.1.304.1000 | qmsENGConsumeNameMulti | 1 | 1 | A table of the engine's consumable names. |
1.3.6.1.4.1.480.1.304.1001 | qmsENGConsumeLevelMulti | 1 | 1 | A table of the engine's consumable levels. |
1.3.6.1.4.1.480.1.304.1002 | qmsENGConsumeMaxMulti | 1 | 1 | A table of the engine's consumable maximum levels. |
1.3.6.1.4.1.480.1.304.1003 | qmsENGConsumeUnitsMulti | 1 | 1 | A table of the engine's consumable units. |
1.3.6.1.4.1.480.1.304.1004 | qmsENGConsumeTypeMulti | 1 | 1 | A table of the engine's consumable types. |
1.3.6.1.4.1.480.1.304.1005 | qmsENGConsumeNote1Multi | 1 | 1 | A table of the first note applicable to each of the engines consumable. |
1.3.6.1.4.1.480.1.304.1006 | qmsENGConsumeNote2Multi | 1 | 1 | A table of the second note applicable to each of the engine's consumables. |
1.3.6.1.4.1.480.1.304.1007 | qmsENGConsumeIndexMulti | 1 | 1 | Index into OID table. |
1.3.6.1.4.1.480.1.304.1010 | qmsENGNumConsumables | 0 | 0 | Number of engine-related consumables that exist within the system. |
1.3.6.1.4.1.480.1.304.1011 | qmsENGChainInputBins | 0 | 0 | An option in the Operator Control menu allows you to 'chain' input- bins (tray and cassettes) so that when the first inputbin em… |
1.3.6.1.4.1.480.1.304.1012 | qmsENGChainOutputbinMulti | 1 | 1 | A table of the engine's default input chaining setting. |
1.3.6.1.4.1.480.1.304.1013 | qmsENGInputbinMediatypeMulti | 1 | 1 | A table of the engine's default media type setting. |
1.3.6.1.4.1.480.1.304.1014 | qmsENGChainInputbinMulti | 1 | 1 | A table of the engine's default input chaining setting. |
1.3.6.1.4.1.480.1.304.1015 | qmsENGStaplePosition | 0 | 0 | This option identifies the location of the staple when stapling is enabled. Choices Off, Front corner, Back corner, Center, Offset… |