Voice station configuration row definition.
Parsed from file CXMCVOX.MIB.txt
Company: None
Module: CXMCVOX-MIB
Voice station configuration row definition.
Parsed from file CXMCVOX-MIB.mib
Module: CXMCVOX-MIB
Vendor: Memotec Communications
Module: CXMCVOX-MIB
[Automatically extracted from oidview.com]
cxMcVoxCfgEntry OBJECT-TYPE SYNTAX CxMcVoxCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Voice station configuration row definition." INDEX { cxMcVoxCfgCardIndex, cxMcVoxCfgPortIndex } ::= { cxMcVoxCfgTable 1 }
cxMcVoxCfgEntry OBJECT-TYPE SYNTAX CxMcVoxCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Voice station configuration row definition." INDEX { cxMcVoxCfgCardIndex, cxMcVoxCfgPortIndex } ::= { cxMcVoxCfgTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.1.2.2.1.1 | cxMcVoxCfgCardIndex | 0 | 0 | Displays the slot number of the voice I/O card. You cannot modify this object. Range of Values: CX900: 1 to 6 CX1000: 1 to 8 Default… |
| 1.3.6.1.4.1.495.2.1.1.2.2.1.2 | cxMcVoxCfgPortIndex | 0 | 0 | Displays the number of the voice port. You cannot modify this object. Options: CX900: 1 is the only acceptable value. Each I/O car… |
| 1.3.6.1.4.1.495.2.1.1.2.2.1.3 | cxMcVoxCfgDriverAdmUsed | 0 | 0 | Determines the administrative driver of the port. The driver controls which signals the port supports. A port can only support o… |
| 1.3.6.1.4.1.495.2.1.1.2.2.1.4 | cxMcVoxCfgDriverOpeUsed | 0 | 0 | Displays the operative driver currently running on the port. You cannot modify this object. If you want to change the value you … |
| 1.3.6.1.4.1.495.2.1.1.2.2.1.5 | cxMcVoxCfgTrapOnLine | 0 | 0 | Determines the state of the port's online trap. When set to 'enable', every time a fax or phone call begins (i.e. the port switch… |
| 1.3.6.1.4.1.495.2.1.1.2.2.1.6 | cxMcVoxCfgTrapOffLine | 0 | 0 | Determines the state of the port's offline trap. When set to 'enable', every time a fax or phone call ends ( i.e. the port switch… |
| 1.3.6.1.4.1.495.2.1.1.2.2.1.7 | cxMcVoxCfgTrapStatus | 0 | 0 | Determines the state of the port's status trap. When set to 'enable', every time the functional state of the voice channel change… |
| 1.3.6.1.4.1.495.2.1.1.2.2.1.8 | cxMcVoxCfgTrapState | 0 | 0 | Determines the state of the port's outgoing calls trap. When set to 'enable', every time an outgoing call request is in process t… |
| 1.3.6.1.4.1.495.2.1.1.2.2.1.9 | cxMcVoxCfgTestPort | 0 | 0 | Determines the state of the port's self test. When set to 'yes', this object triggers the port to intiate a self-test. The port e… |
| 1.3.6.1.4.1.495.2.1.1.2.2.1.10 | cxMcVoxCfgToneTest | 0 | 0 | Determines the state of the port's standard tone test (1004Hz). When set to 'enable', this object triggers the port to perform a… |
| 1.3.6.1.4.1.495.2.1.1.2.2.1.11 | cxMcVoxCfgReinitPort | 0 | 0 | Determines the port's reinitialization state. The setting of this object is dynamic. When set to 'yes', this object triggers the … |
| 1.3.6.1.4.1.495.2.1.1.2.2.1.12 | cxMcVoxCfgClearPort | 0 | 0 | Determines whether to restore all administrative voice port configurations to the default factory settings. The setting of this o… |
| 1.3.6.1.4.1.495.2.1.1.2.2.1.14 | cxMcVoxCfgOpeAcelpRev | 0 | 0 | Displays the ACELP software revision currently running on the operative voice channel. Range of Values: 0 to 12 alphanumeric char… |
| 1.3.6.1.4.1.495.2.1.1.2.2.1.15 | cxMcVoxCfgCmdImmTest | 0 | 0 | WARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF MEMOTEC PERSONNEL. Range of Values: 0 to 4294967295 Default … |
| 1.3.6.1.4.1.495.2.1.1.2.2.1.16 | cxMcVoxCfgCmdTest | 0 | 0 | WARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF MEMOTEC PERSONNEL. Range of Values: 0 to 4294967295 Default … |
| 1.3.6.1.4.1.495.2.1.1.2.2.1.17 | cxMcVoxCfgMaxPktFrame | 0 | 0 | The number of voice packet included in a voice frame. Less voice packet there is in a frame, bigger is the bandwitdh overhead o… |
| 1.3.6.1.4.1.495.2.1.1.2.2.1.18 | cxMcVoxCfgMaxSkew | 0 | 0 | The number of msec of skew that the end-to-end synchronization algorithm must compensate. |