Determines the administrative driver of the port. The driver controls
which signals the port supports. A port can only support one type of
driver at any one time.
Depending on the type of driver you choose, you must perform further
configuration using one of the following tables:
- cxMcVoxEmAdmtable (for E&M drivers) - cxMcVoxFxsAdmTable (for FXS
drivers) - cxMcVoxFxoAdmTable (for FXO drivers)
Options:
em (1): Recommended for a PBX connection. Provides RJ-12 and PB-45 port
connectors.
fxs (2): Recommended for a standard telephone connection, where the
Memotec device simulates a Telco. The device provides the ring and dial
tone. FXS can also be used for a PBX connection, and provides an RJ-12
port connector.
fxo (3): Recommended for a standard telephone connection, where the
Memotec device simulates a telephone. FXO can also be used for a PBX
connection, and provides an RJ-12 port connector.
Default Value: fxs (2)
Configuration Changed: administrative
Parsed from file CXMCVOX.MIB.txt
Company: None
Module: CXMCVOX-MIB
Determines the administrative driver of the port. The driver controls
which signals the port supports. A port can only support one type of
driver at any one time.
Depending on the type of driver you choose, you must perform further
configuration using one of the following tables:
- cxMcVoxEmAdmtable (for E&M drivers) - cxMcVoxFxsAdmTable (for FXS
drivers) - cxMcVoxFxoAdmTable (for FXO drivers)
Options:
em (1): Recommended for a PBX connection. Provides RJ-12 and PB-45 port
connectors.
fxs (2): Recommended for a standard telephone connection, where the
Memotec device simulates a Telco. The device provides the ring and dial
tone. FXS can also be used for a PBX connection, and provides an RJ-12
port connector.
fxo (3): Recommended for a standard telephone connection, where the
Memotec device simulates a telephone. FXO can also be used for a PBX
connection, and provides an RJ-12 port connector.
Default Value: fxs (2)
Configuration Changed: administrative
Parsed from file CXMCVOX-MIB.mib
Module: CXMCVOX-MIB
Vendor: Memotec Communications
Module: CXMCVOX-MIB
[Automatically extracted from oidview.com]
cxMcVoxCfgDriverAdmUsed OBJECT-TYPE SYNTAX INTEGER { em(1), fxs(2), fxo(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Determines the administrative driver of the port. The driver controls which signals the port supports. A port can only support one type of driver at any one time. Depending on the type of driver you choose, you must perform further configuration using one of the following tables: - cxMcVoxEmAdmtable (for E&M drivers) - cxMcVoxFxsAdmTable (for FXS drivers) - cxMcVoxFxoAdmTable (for FXO drivers) Options: em (1): Recommended for a PBX connection. Provides RJ-12 and PB-45 port connectors. fxs (2): Recommended for a standard telephone connection, where the Memotec device simulates a Telco. The device provides the ring and dial tone. FXS can also be used for a PBX connection, and provides an RJ-12 port connector. fxo (3): Recommended for a standard telephone connection, where the Memotec device simulates a telephone. FXO can also be used for a PBX connection, and provides an RJ-12 port connector. Default Value: fxs (2) Configuration Changed: administrative" DEFVAL { fxs } ::= { cxMcVoxCfgEntry 3 }
cxMcVoxCfgDriverAdmUsed OBJECT-TYPE SYNTAX INTEGER { em(1), fxs(2), fxo(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Determines the administrative driver of the port. The driver controls which signals the port supports. A port can only support one type of driver at any one time. Depending on the type of driver you choose, you must perform further configuration using one of the following tables: - cxMcVoxEmAdmtable (for E&M drivers) - cxMcVoxFxsAdmTable (for FXS drivers) - cxMcVoxFxoAdmTable (for FXO drivers) Options: em (1): Recommended for a PBX connection. Provides RJ-12 and PB-45 port connectors. fxs (2): Recommended for a standard telephone connection, where the Memotec device simulates a Telco. The device provides the ring and dial tone. FXS can also be used for a PBX connection, and provides an RJ-12 port connector. fxo (3): Recommended for a standard telephone connection, where the Memotec device simulates a telephone. FXO can also be used for a PBX connection, and provides an RJ-12 port connector. Default Value: fxs (2) Configuration Changed: administrative" DEFVAL { fxs } ::= { cxMcVoxCfgEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.1.2.2.1.1 | cxMcVoxCfgCardIndex | 0 | 0 | Displays the slot number of the voice I/O card. You cannot modify this object. Range of Values: CX900: 1 to 6 CX1000: 1 to 8 Default… |
| 1.3.6.1.4.1.495.2.1.1.2.2.1.2 | cxMcVoxCfgPortIndex | 0 | 0 | Displays the number of the voice port. You cannot modify this object. Options: CX900: 1 is the only acceptable value. Each I/O car… |
| 1.3.6.1.4.1.495.2.1.1.2.2.1.4 | cxMcVoxCfgDriverOpeUsed | 0 | 0 | Displays the operative driver currently running on the port. You cannot modify this object. If you want to change the value you … |
| 1.3.6.1.4.1.495.2.1.1.2.2.1.5 | cxMcVoxCfgTrapOnLine | 0 | 0 | Determines the state of the port's online trap. When set to 'enable', every time a fax or phone call begins (i.e. the port switch… |
| 1.3.6.1.4.1.495.2.1.1.2.2.1.6 | cxMcVoxCfgTrapOffLine | 0 | 0 | Determines the state of the port's offline trap. When set to 'enable', every time a fax or phone call ends ( i.e. the port switch… |
| 1.3.6.1.4.1.495.2.1.1.2.2.1.7 | cxMcVoxCfgTrapStatus | 0 | 0 | Determines the state of the port's status trap. When set to 'enable', every time the functional state of the voice channel change… |
| 1.3.6.1.4.1.495.2.1.1.2.2.1.8 | cxMcVoxCfgTrapState | 0 | 0 | Determines the state of the port's outgoing calls trap. When set to 'enable', every time an outgoing call request is in process t… |
| 1.3.6.1.4.1.495.2.1.1.2.2.1.9 | cxMcVoxCfgTestPort | 0 | 0 | Determines the state of the port's self test. When set to 'yes', this object triggers the port to intiate a self-test. The port e… |
| 1.3.6.1.4.1.495.2.1.1.2.2.1.10 | cxMcVoxCfgToneTest | 0 | 0 | Determines the state of the port's standard tone test (1004Hz). When set to 'enable', this object triggers the port to perform a… |
| 1.3.6.1.4.1.495.2.1.1.2.2.1.11 | cxMcVoxCfgReinitPort | 0 | 0 | Determines the port's reinitialization state. The setting of this object is dynamic. When set to 'yes', this object triggers the … |
| 1.3.6.1.4.1.495.2.1.1.2.2.1.12 | cxMcVoxCfgClearPort | 0 | 0 | Determines whether to restore all administrative voice port configurations to the default factory settings. The setting of this o… |
| 1.3.6.1.4.1.495.2.1.1.2.2.1.14 | cxMcVoxCfgOpeAcelpRev | 0 | 0 | Displays the ACELP software revision currently running on the operative voice channel. Range of Values: 0 to 12 alphanumeric char… |
| 1.3.6.1.4.1.495.2.1.1.2.2.1.15 | cxMcVoxCfgCmdImmTest | 0 | 0 | WARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF MEMOTEC PERSONNEL. Range of Values: 0 to 4294967295 Default … |
| 1.3.6.1.4.1.495.2.1.1.2.2.1.16 | cxMcVoxCfgCmdTest | 0 | 0 | WARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF MEMOTEC PERSONNEL. Range of Values: 0 to 4294967295 Default … |
| 1.3.6.1.4.1.495.2.1.1.2.2.1.17 | cxMcVoxCfgMaxPktFrame | 0 | 0 | The number of voice packet included in a voice frame. Less voice packet there is in a frame, bigger is the bandwitdh overhead o… |
| 1.3.6.1.4.1.495.2.1.1.2.2.1.18 | cxMcVoxCfgMaxSkew | 0 | 0 | The number of msec of skew that the end-to-end synchronization algorithm must compensate. |