Determines the state of the port's standard tone test (1004Hz).
When set to 'enable', this object triggers the port to perform a tone
test. The port tests its voice sound quality by transmitting a 1004Hz
tone. You can perform the test on either an open (call in progress) or
closed channel. However, if you initiate the test on an open channel, the
connection is not disrupted, but the local user will not be able to hear
the remote user. The local user will only hear the tone the test
generates. You must set this object to 'disable' to stop the test. It does
not stop on its own.
The setting of this object is dynamic. When set to'enable' the tone test
begins immediately.
Options:
disable (1)
enable (2)
Default Value: disable (1)
Configuration Changed: operative
Parsed from file CXMCVOX.MIB.txt
Company: None
Module: CXMCVOX-MIB
Determines the state of the port's standard tone test (1004Hz).
When set to 'enable', this object triggers the port to perform a tone
test. The port tests its voice sound quality by transmitting a 1004Hz
tone. You can perform the test on either an open (call in progress) or
closed channel. However, if you initiate the test on an open channel, the
connection is not disrupted, but the local user will not be able to hear
the remote user. The local user will only hear the tone the test
generates. You must set this object to 'disable' to stop the test. It does
not stop on its own.
The setting of this object is dynamic. When set to'enable' the tone test
begins immediately.
Options:
disable (1)
enable (2)
Default Value: disable (1)
Configuration Changed: operative
Parsed from file CXMCVOX-MIB.mib
Module: CXMCVOX-MIB
Vendor: Memotec Communications
Module: CXMCVOX-MIB
[Automatically extracted from oidview.com]
cxMcVoxCfgToneTest OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Determines the state of the port's standard tone test (1004Hz). When set to 'enable', this object triggers the port to perform a tone test. The port tests its voice sound quality by transmitting a 1004Hz tone. You can perform the test on either an open (call in progress) or closed channel. However, if you initiate the test on an open channel, the connection is not disrupted, but the local user will not be able to hear the remote user. The local user will only hear the tone the test generates. You must set this object to 'disable' to stop the test. It does not stop on its own. The setting of this object is dynamic. When set to'enable' the tone test begins immediately. Options: disable (1) enable (2) Default Value: disable (1) Configuration Changed: operative" DEFVAL { disable } ::= { cxMcVoxCfgEntry 10 }
cxMcVoxCfgToneTest OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Determines the state of the port's standard tone test (1004Hz). When set to 'enable', this object triggers the port to perform a tone test. The port tests its voice sound quality by transmitting a 1004Hz tone. You can perform the test on either an open (call in progress) or closed channel. However, if you initiate the test on an open channel, the connection is not disrupted, but the local user will not be able to hear the remote user. The local user will only hear the tone the test generates. You must set this object to 'disable' to stop the test. It does not stop on its own. The setting of this object is dynamic. When set to'enable' the tone test begins immediately. Options: disable (1) enable (2) Default Value: disable (1) Configuration Changed: operative" DEFVAL { disable } ::= { cxMcVoxCfgEntry 10 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.495.2.1.1.2.2.1.1 | cxMcVoxCfgCardIndex | 0 | 0 | Displays the slot number of the voice I/O card. You cannot modify this object. Range of Values: CX900: 1 to 6 CX1000: 1 to 8 Default… |
1.3.6.1.4.1.495.2.1.1.2.2.1.2 | cxMcVoxCfgPortIndex | 0 | 0 | Displays the number of the voice port. You cannot modify this object. Options: CX900: 1 is the only acceptable value. Each I/O car… |
1.3.6.1.4.1.495.2.1.1.2.2.1.3 | cxMcVoxCfgDriverAdmUsed | 0 | 0 | Determines the administrative driver of the port. The driver controls which signals the port supports. A port can only support o… |
1.3.6.1.4.1.495.2.1.1.2.2.1.4 | cxMcVoxCfgDriverOpeUsed | 0 | 0 | Displays the operative driver currently running on the port. You cannot modify this object. If you want to change the value you … |
1.3.6.1.4.1.495.2.1.1.2.2.1.5 | cxMcVoxCfgTrapOnLine | 0 | 0 | Determines the state of the port's online trap. When set to 'enable', every time a fax or phone call begins (i.e. the port switch… |
1.3.6.1.4.1.495.2.1.1.2.2.1.6 | cxMcVoxCfgTrapOffLine | 0 | 0 | Determines the state of the port's offline trap. When set to 'enable', every time a fax or phone call ends ( i.e. the port switch… |
1.3.6.1.4.1.495.2.1.1.2.2.1.7 | cxMcVoxCfgTrapStatus | 0 | 0 | Determines the state of the port's status trap. When set to 'enable', every time the functional state of the voice channel change… |
1.3.6.1.4.1.495.2.1.1.2.2.1.8 | cxMcVoxCfgTrapState | 0 | 0 | Determines the state of the port's outgoing calls trap. When set to 'enable', every time an outgoing call request is in process t… |
1.3.6.1.4.1.495.2.1.1.2.2.1.9 | cxMcVoxCfgTestPort | 0 | 0 | Determines the state of the port's self test. When set to 'yes', this object triggers the port to intiate a self-test. The port e… |
1.3.6.1.4.1.495.2.1.1.2.2.1.11 | cxMcVoxCfgReinitPort | 0 | 0 | Determines the port's reinitialization state. The setting of this object is dynamic. When set to 'yes', this object triggers the … |
1.3.6.1.4.1.495.2.1.1.2.2.1.12 | cxMcVoxCfgClearPort | 0 | 0 | Determines whether to restore all administrative voice port configurations to the default factory settings. The setting of this o… |
1.3.6.1.4.1.495.2.1.1.2.2.1.14 | cxMcVoxCfgOpeAcelpRev | 0 | 0 | Displays the ACELP software revision currently running on the operative voice channel. Range of Values: 0 to 12 alphanumeric char… |
1.3.6.1.4.1.495.2.1.1.2.2.1.15 | cxMcVoxCfgCmdImmTest | 0 | 0 | WARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF MEMOTEC PERSONNEL. Range of Values: 0 to 4294967295 Default … |
1.3.6.1.4.1.495.2.1.1.2.2.1.16 | cxMcVoxCfgCmdTest | 0 | 0 | WARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF MEMOTEC PERSONNEL. Range of Values: 0 to 4294967295 Default … |
1.3.6.1.4.1.495.2.1.1.2.2.1.17 | cxMcVoxCfgMaxPktFrame | 0 | 0 | The number of voice packet included in a voice frame. Less voice packet there is in a frame, bigger is the bandwitdh overhead o… |
1.3.6.1.4.1.495.2.1.1.2.2.1.18 | cxMcVoxCfgMaxSkew | 0 | 0 | The number of msec of skew that the end-to-end synchronization algorithm must compensate. |