Returns a bit-wise Status of alarms
Octet 1 bit 7 - not used
bit 6 - NTWK LOS
bit 5 - NTWK LOF
bit 4 - NWTK_AIS
bit 3 - future use
bit 2 - NTWK Received YELLOW
bit 1 - NTWK Excessive Zeros - not supported
bit 0 - NTWK Low Average Density - not supported
Octet 2 bit 7 - not used
bit 6 - NTWK BiPolar Violations
bit 5 - NTWK CRC Errors
bit 4 - NTWK Controlled Slips
bit 3 - Unavailable Signal State
bit 2 - Status Change
bit 1 - Timing Loss
bit 0 - Unit Failure
Octet 3 bit 7 - not used
bit 6 - future use
bit 5 - future use
bit 4 - future use
bit 3 - future use
bit 2 - future use
bit 1 - future use
bit 0 - future use
Octet 4 bit 7 - not used
bit 6 - ES
bit 5 - BES
bit 4 - SES
bit 3 - UAS
bit 2 - Unsolicited Test
bit 1 - NVRAM checksum corrupted
bit 0 - Power-up Alarm
Parsed from file gdc7001.mib.txt
Company: None
Module: GDCMP7001-MIB
Returns a bit-wise Status of alarms
Octet 1 bit 7 - not used
bit 6 - NTWK LOS
bit 5 - NTWK LOF
bit 4 - NWTK_AIS
bit 3 - future use
bit 2 - NTWK Received YELLOW
bit 1 - NTWK Excessive Zeros - not supported
bit 0 - NTWK Low Average Density - not supported
Octet 2 bit 7 - not used
bit 6 - NTWK BiPolar Violations
bit 5 - NTWK CRC Errors
bit 4 - NTWK Controlled Slips
bit 3 - Unavailable Signal State
bit 2 - Status Change
bit 1 - Timing Loss
bit 0 - Unit Failure
Octet 3 bit 7 - not used
bit 6 - future use
bit 5 - future use
bit 4 - future use
bit 3 - future use
bit 2 - future use
bit 1 - future use
bit 0 - future use
Octet 4 bit 7 - not used
bit 6 - ES
bit 5 - BES
bit 4 - SES
bit 3 - UAS
bit 2 - Unsolicited Test
bit 1 - NVRAM checksum corrupted
bit 0 - Power-up Alarm
Parsed from file GDCMP7001-MIB.mib
Module: GDCMP7001-MIB
mp7001AlarmStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION "Returns a bit-wise Status of alarms Octet 1 bit 7 - not used bit 6 - NTWK LOS bit 5 - NTWK LOF bit 4 - NWTK_AIS bit 3 - future use bit 2 - NTWK Received YELLOW bit 1 - NTWK Excessive Zeros - not supported bit 0 - NTWK Low Average Density - not supported Octet 2 bit 7 - not used bit 6 - NTWK BiPolar Violations bit 5 - NTWK CRC Errors bit 4 - NTWK Controlled Slips bit 3 - Unavailable Signal State bit 2 - Status Change bit 1 - Timing Loss bit 0 - Unit Failure Octet 3 bit 7 - not used bit 6 - future use bit 5 - future use bit 4 - future use bit 3 - future use bit 2 - future use bit 1 - future use bit 0 - future use Octet 4 bit 7 - not used bit 6 - ES bit 5 - BES bit 4 - SES bit 3 - UAS bit 2 - Unsolicited Test bit 1 - NVRAM checksum corrupted bit 0 - Power-up Alarm " ::= {mp7001MaintenanceEntry 9}
Vendor: General DataComm, Inc.
Module: GDCMP7001-MIB
[Automatically extracted from oidview.com]
mp7001AlarmStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION "Returns a bit-wise Status of alarms Octet 1 bit 7 - not used bit 6 - NTWK LOS bit 5 - NTWK LOF bit 4 - NWTK_AIS bit 3 - future use bit 2 - NTWK Received YELLOW bit 1 - NTWK Excessive Zeros - not supported bit 0 - NTWK Low Average Density - not supported Octet 2 bit 7 - not used bit 6 - NTWK BiPolar Violations bit 5 - NTWK CRC Errors bit 4 - NTWK Controlled Slips bit 3 - Unavailable Signal State bit 2 - Status Change bit 1 - Timing Loss bit 0 - Unit Failure Octet 3 bit 7 - not used bit 6 - future use bit 5 - future use bit 4 - future use bit 3 - future use bit 2 - future use bit 1 - future use bit 0 - future use Octet 4 bit 7 - not used bit 6 - ES bit 5 - BES bit 4 - SES bit 3 - UAS bit 2 - Unsolicited Test bit 1 - NVRAM checksum corrupted bit 0 - Power-up Alarm " ::= {mp7001MaintenanceEntry 9}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498.6.10.2.1.1.1 | mp7001MaintenanceLineIndex | 0 | 0 | Integer value which uniquely identifies the MP7001 to which this entry is applicable. SCinstance is defined to be ssllddcc where… |
| 1.3.6.1.4.1.498.6.10.2.1.1.2 | mp7001SoftReset | 0 | 0 | Supports the action of soft resetting the unit. When this object is set to reset(2), then the unit performs a soft reset, whose … |
| 1.3.6.1.4.1.498.6.10.2.1.1.3 | mp7001SysUpTime | 0 | 0 | This variable is used to report the elapsed system tick time for conversion to real time at the controller and is not related to … |
| 1.3.6.1.4.1.498.6.10.2.1.1.4 | mp7001DefaultInit | 0 | 0 | This is used to allow the NonVolatile Configuration to be set to a factory default state. When this value is set to factoryDefau… |
| 1.3.6.1.4.1.498.6.10.2.1.1.5 | mp7001ResetStats | 0 | 0 | Supports the action of soft resetting the mp7001ValidIntervals object. When this object is set to reset(2), then the unit will r… |
| 1.3.6.1.4.1.498.6.10.2.1.1.6 | mp7001LedStatus | 0 | 0 | Returns a bitwise snapshot of the front panel LED state. Octet 1 bit 7 - not used bit 6 - ON bit 5 - INSV bit 4 - RSP bit 3 - TMG bit… |
| 1.3.6.1.4.1.498.6.10.2.1.1.7 | mp7001T1CircuitName | 0 | 0 | Circuit name T1 is connected to. |
| 1.3.6.1.4.1.498.6.10.2.1.1.8 | mp7001SetRealTime | 0 | 0 | Number of seconds from midnight Dec 31, 1969. |
| 1.3.6.1.4.1.498.6.10.2.1.1.10 | mp7001SystemTimingGenStatus | 0 | 0 | Indicates if the units configured for primary or secondary system clock are actually supplying clock and if it is the 8hkz, 4mhz… |
| 1.3.6.1.4.1.498.6.10.2.1.1.11 | mp7001StatLastInitialized | 0 | 0 | Number of seconds from midnight Dec 31, 1969 up until mp7001ValidIntervals was last initialized to zero |
| 1.3.6.1.4.1.498.6.10.2.1.1.12 | mp7001ValidIntervals | 0 | 0 | The number of previous intervals for which valid data was collected. The value will be 96 unless the interface was brought o… |