This option sets the external output state (on/off) of the
current network element and displays the external output.
Parsed from file nms510.mib.txt
Company: None
Module: NMS510-MIB
This option sets the external output state (on/off) of the
current network element and displays the external output.
Parsed from file NMS510-MIB.mib
Module: NMS510-MIB
nms510ExtPortCtrlOut1 OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This option sets the external output state (on/off) of the current network element and displays the external output." ::= { nms510UnitCfgEntry 11 }
Vendor: General DataComm, Inc.
Module: NMS510-MIB
[Automatically extracted from oidview.com]
nms510ExtPortCtrlOut1 OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This option sets the external output state (on/off) of the current network element and displays the external output." ::= { nms510UnitCfgEntry 11 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.498.8.6.2.1.1 | nms510UnitCfgIndex | 0 | 0 | The index value which uniquely identifies the NMS510 to which this entry is applicable. This has the form of a SCinstance which … |
1.3.6.1.4.1.498.8.6.2.1.2 | nms510DteCtsDelay | 0 | 0 | RTS/CTS Delay options ctsOn(1) Forces both RTS and CTS On regardless of the state of the attached business equipment (the transmi… |
1.3.6.1.4.1.498.8.6.2.1.3 | nms510DteCtsDelayExt | 0 | 0 | RTS/CTS Delay options extension ext0mSec(1) Used to enable options cts0mSec(2) or ctsFix3Char(3) from MIB object nms510DteCtsDelay… |
1.3.6.1.4.1.498.8.6.2.1.4 | nms510FirmwareLevel | 0 | 0 | None |
1.3.6.1.4.1.498.8.6.2.1.5 | nms510AlarmCfgCountWindow | 0 | 0 | The DDS Alarm Threshold Alarm Interval. It specifies the amount of time in minutes, 1 to 15 minutes, in which the threshold sett… |
1.3.6.1.4.1.498.8.6.2.1.6 | nms510SoftReset | 0 | 0 | This object will cause software reset in dataset. |
1.3.6.1.4.1.498.8.6.2.1.7 | nms510FrontPanelInhibit | 0 | 0 | Inhibits front panel test switch. If a test switch is activated while inhibited it will simply be ignored. If enabled via the nm… |
1.3.6.1.4.1.498.8.6.2.1.8 | nms510FrontPanelEnable | 0 | 0 | Enables front panel test switch. If a test switch is activated while inhibited, via the nms510FrontPanelInhibit object, it will … |
1.3.6.1.4.1.498.8.6.2.1.9 | nms510HdlcInvert | 0 | 0 | Primary data invert option. Will enhance the quality of data when network does not provide B8Z5. Primarily used with DDS II 56k |
1.3.6.1.4.1.498.8.6.2.1.10 | nms510PiggyBackDetect | 0 | 0 | If set to 2 then either a Data Rate Adadaptor or 530 card is installed. |
1.3.6.1.4.1.498.8.6.2.1.12 | nms510ExtPortCtrlOut2 | 0 | 0 | This option sets the external output state (on/off) of the current network element and displays the external output. |