RTS/CTS Delay options
ctsOn(1) Forces both RTS and CTS On regardless of the
state of the attached business equipment (the
transmitter is On regardless of the status of
the RTS interface lead). MIB object
nms510DteCtsDelayExt is ignored.
cts0mSec(2) Provides zero bits of delay between active
RTS and CTS being set to active. MIB object
nms510DteCtsDelayExt must be set to ext0mSec(1).
ctsFix3Char(3) Provides three character bits of delay between
active RTS and CTS being set to active. MIB
object nms510DteCtsDelayExt must be set to
ext0mSec(1).
Parsed from file nms510.mib.txt
Company: None
Module: NMS510-MIB
RTS/CTS Delay options
ctsOn(1) Forces both RTS and CTS On regardless of the
state of the attached business equipment (the
transmitter is On regardless of the status of
the RTS interface lead). MIB object
nms510DteCtsDelayExt is ignored.
cts0mSec(2) Provides zero bits of delay between active
RTS and CTS being set to active. MIB object
nms510DteCtsDelayExt must be set to ext0mSec(1).
ctsFix3Char(3) Provides three character bits of delay between
active RTS and CTS being set to active. MIB
object nms510DteCtsDelayExt must be set to
ext0mSec(1).
Parsed from file NMS510-MIB.mib
Module: NMS510-MIB
nms510DteCtsDelay OBJECT-TYPE SYNTAX INTEGER { ctsOn(1), cts0mSec(2), ctsFixed3Char(3) } ACCESS read-write STATUS mandatory DESCRIPTION "RTS/CTS Delay options ctsOn(1) Forces both RTS and CTS On regardless of the state of the attached business equipment (the transmitter is On regardless of the status of the RTS interface lead). MIB object nms510DteCtsDelayExt is ignored. cts0mSec(2) Provides zero bits of delay between active RTS and CTS being set to active. MIB object nms510DteCtsDelayExt must be set to ext0mSec(1). ctsFix3Char(3) Provides three character bits of delay between active RTS and CTS being set to active. MIB object nms510DteCtsDelayExt must be set to ext0mSec(1)." ::= { nms510UnitCfgEntry 2 }
Vendor: General DataComm, Inc.
Module: NMS510-MIB
[Automatically extracted from oidview.com]
nms510DteCtsDelay OBJECT-TYPE SYNTAX INTEGER { ctsOn(1), cts0mSec(2), ctsFixed3Char(3) } ACCESS read-write STATUS mandatory DESCRIPTION "RTS/CTS Delay options ctsOn(1) Forces both RTS and CTS On regardless of the state of the attached business equipment (the transmitter is On regardless of the status of the RTS interface lead). MIB object nms510DteCtsDelayExt is ignored. cts0mSec(2) Provides zero bits of delay between active RTS and CTS being set to active. MIB object nms510DteCtsDelayExt must be set to ext0mSec(1). ctsFix3Char(3) Provides three character bits of delay between active RTS and CTS being set to active. MIB object nms510DteCtsDelayExt must be set to ext0mSec(1)." ::= { nms510UnitCfgEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498.8.6.2.1.1 | nms510UnitCfgIndex | 0 | 0 | The index value which uniquely identifies the NMS510 to which this entry is applicable. This has the form of a SCinstance which … |
| 1.3.6.1.4.1.498.8.6.2.1.3 | nms510DteCtsDelayExt | 0 | 0 | RTS/CTS Delay options extension ext0mSec(1) Used to enable options cts0mSec(2) or ctsFix3Char(3) from MIB object nms510DteCtsDelay… |
| 1.3.6.1.4.1.498.8.6.2.1.4 | nms510FirmwareLevel | 0 | 0 | None |
| 1.3.6.1.4.1.498.8.6.2.1.5 | nms510AlarmCfgCountWindow | 0 | 0 | The DDS Alarm Threshold Alarm Interval. It specifies the amount of time in minutes, 1 to 15 minutes, in which the threshold sett… |
| 1.3.6.1.4.1.498.8.6.2.1.6 | nms510SoftReset | 0 | 0 | This object will cause software reset in dataset. |
| 1.3.6.1.4.1.498.8.6.2.1.7 | nms510FrontPanelInhibit | 0 | 0 | Inhibits front panel test switch. If a test switch is activated while inhibited it will simply be ignored. If enabled via the nm… |
| 1.3.6.1.4.1.498.8.6.2.1.8 | nms510FrontPanelEnable | 0 | 0 | Enables front panel test switch. If a test switch is activated while inhibited, via the nms510FrontPanelInhibit object, it will … |
| 1.3.6.1.4.1.498.8.6.2.1.9 | nms510HdlcInvert | 0 | 0 | Primary data invert option. Will enhance the quality of data when network does not provide B8Z5. Primarily used with DDS II 56k |
| 1.3.6.1.4.1.498.8.6.2.1.10 | nms510PiggyBackDetect | 0 | 0 | If set to 2 then either a Data Rate Adadaptor or 530 card is installed. |
| 1.3.6.1.4.1.498.8.6.2.1.11 | nms510ExtPortCtrlOut1 | 0 | 0 | This option sets the external output state (on/off) of the current network element and displays the external output. |
| 1.3.6.1.4.1.498.8.6.2.1.12 | nms510ExtPortCtrlOut2 | 0 | 0 | This option sets the external output state (on/off) of the current network element and displays the external output. |