This attribute specifies the shaping rate to be used in computing the
tolerable delay for per-VC queues of connections of the UBR
service category. The delay is computed as the txQueueLimit
divided by the value of this attribute.
When the value of this attribute is autoConfigure, an appropriate
default is selected based on the card type. It is set to 3685 for low
speed cards such as DS1, E1 and IMA, set to 14740 for high speed
cards such as JT2, DS3, E3 and OC3, and set to 65511 for high
speed ATM IP cards such as 3pDS3Atm2, 3pE3Atm2,
2pOC3SmAtm2 and 2pOC3MmAtm2.
On CQC-based ATM cards, this attribute must be set to the same
value for CA NrtVbr, Abr and Ubr components.
For Vpts, this attribute does not apply. Regardless of Vpt service
category, standard Vpts always use the AtmIf Ca NrtVbr
perVcQueueLimitReferenceRate value as their default.
VALUES (
0 = autoConfigure
)
Parsed from file nortelPP-atmCoreV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-AtmCoreMIB
This attribute specifies the shaping rate to be used in computing the
tolerable delay for per-VC queues of connections of the UBR
service category. The delay is computed as the txQueueLimit
divided by the value of this attribute.
When the value of this attribute is autoConfigure, an appropriate
default is selected based on the card type. It is set to 3685 for low
speed cards such as DS1, E1 and IMA, set to 14740 for high speed
cards such as JT2, DS3, E3 and OC3, and set to 65511 for high
speed ATM IP cards such as 3pDS3Atm2, 3pE3Atm2,
2pOC3SmAtm2 and 2pOC3MmAtm2.
On CQC-based ATM cards, this attribute must be set to the same
value for CA NrtVbr, Abr and Ubr components.
For Vpts, this attribute does not apply. Regardless of Vpt service
category, standard Vpts always use the AtmIf Ca NrtVbr
perVcQueueLimitReferenceRate value as their default.
VALUES (
0 = autoConfigure
)
Parsed from file Nortel-Magellan-Passport-AtmCoreMIB.mib
Module: Nortel-Magellan-Passport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-AtmCoreMIB
[Automatically extracted from oidview.com]
atmIfCAUbrPerVcQueueLimitReferenceRate OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..943396) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the shaping rate to be used in computing the tolerable delay for per-VC queues of connections of the UBR service category. The delay is computed as the txQueueLimit divided by the value of this attribute. When the value of this attribute is autoConfigure, an appropriate default is selected based on the card type. It is set to 3685 for low speed cards such as DS1, E1 and IMA, set to 14740 for high speed cards such as JT2, DS3, E3 and OC3, and set to 65511 for high speed ATM IP cards such as 3pDS3Atm2, 3pE3Atm2, 2pOC3SmAtm2 and 2pOC3MmAtm2. On CQC-based ATM cards, this attribute must be set to the same value for CA NrtVbr, Abr and Ubr components. For Vpts, this attribute does not apply. Regardless of Vpt service category, standard Vpts always use the AtmIf Ca NrtVbr perVcQueueLimitReferenceRate value as their default. VALUES ( 0 = autoConfigure )" DEFVAL { 0 } ::= { atmIfCAUbrProvEntry 14 }
atmIfCAUbrPerVcQueueLimitReferenceRate OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..943396) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the shaping rate to be used in computing the tolerable delay for per-VC queues of connections of the UBR service category. The delay is computed as the txQueueLimit divided by the value of this attribute. When the value of this attribute is autoConfigure, an appropriate default is selected based on the card type. It is set to 3685 for low speed cards such as DS1, E1 and IMA, set to 14740 for high speed cards such as JT2, DS3, E3 and OC3, and set to 65511 for high speed ATM IP cards such as 3pDS3Atm2, 3pE3Atm2, 2pOC3SmAtm2 and 2pOC3MmAtm2. On CQC-based ATM cards, this attribute must be set to the same value for CA NrtVbr, Abr and Ubr components. For Vpts, this attribute does not apply. Regardless of Vpt service category, standard Vpts always use the AtmIf Ca NrtVbr perVcQueueLimitReferenceRate value as their default. VALUES ( 0 = autoConfigure )" DEFVAL { 0 } ::= { atmIfCAUbrProvEntry 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.5 | atmIfCAUbrMaxVpcs | 0 | 0 | This attribute specifies the maximum number of UBR Vpcs that can be activated on this AtmIf. The value must not exceed the maxVp… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.6 | atmIfCAUbrMaxVccs | 0 | 0 | This attribute specifies the maximum number of UBR Vccs that can be activated on this AtmIf, including UBR Vpt Vccs. The value m… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.7 | atmIfCAUbrMaxVpts | 0 | 0 | This attribute specifies the maximum number of UBR Vpts that can be activated on this AtmIf. The value must not exceed the maxVp… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.10 | atmIfCAUbrPool | 0 | 0 | This attribute specifies the bandwidth pool which is to be used to support the unspecified bit rate (UBR) service category excep… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.11 | atmIfCAUbrMinimumCellRate | 0 | 0 | This attribute specifies the minimum cell rate (MCR) which is allocated from the UBR bandwidth pool for each UBR connection which… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.12 | atmIfCAUbrTxQueueLimit | 0 | 0 | This attribute specifies the default maximum queue length for the emission queues used to buffer the traffic of the UBR service c… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.13 | atmIfCAUbrMinPerVcQueueLimit | 0 | 0 | This attribute specifies the minimum queue limit for the per-VC queues of connections of the UBR service category. The queue lim… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.15 | atmIfCAUbrEmissionPriority | 0 | 0 | This attribute is not applicable and is ignored for CQC-based ATM cards. This attribute specifies the emission priority (EP) whi… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.19 | atmIfCAUbrTrafficShaping | 0 | 0 | This attribute specifies the default traffic shaping option for connections of the UBR service category. An override to this def… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.20 | atmIfCAUbrShapeRecoupPolicy | 0 | 0 | This attribute specifies the shaping recoup policy for the UBR service category. This is the policy which is used to recoup shap… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.21 | atmIfCAUbrUnshapedTransmitQueueing | 0 | 0 | This attribute specifies the default queuing option for unshaped connections of the UBR service category. This attribute control… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.22 | atmIfCAUbrUsageParameterControl | 0 | 0 | This attribute specifies the default usage parameter control (UPC) option for connections of the UBR service category. This attr… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.23 | atmIfCAUbrWeightPolicy | 0 | 0 | This attribute specifies the policy which is applied when calculating the fairness weight for unshaped connections of the UBR se… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.24 | atmIfCAUbrForceTagging | 0 | 0 | This attribute specifies the default of whether to force tagging (CLP=1) of all cells for all UBR connections. An override to th… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.30 | atmIfCAUbrCdvt | 0 | 0 | This attribute specifies the default cell delay variation tolerance (CDVT) for all connections of the UBR service category. An ov… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.40 | atmIfCAUbrHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVP and SVC UBR connections. It takes a value from 0 (hig… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.50 | atmIfCAUbrSvcMpHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVC UBR point-to-multipoint connections. It takes a value… |