This attribute specifies the maximum number of UBR Vpts that can
be activated on this AtmIf. The value must not exceed the maxVpts
attribute of the parent CA component.
If this attribute is specified as sameAsCa, the maximum number of
Vpts is defined by the AtmIf/n CA maxVpts attribute.
Changes to this attribute do not affect existing Vpts. If the value is
changed to a number smaller than the current number of active
UBR VPTs, no new UBR VPTs are admitted until the number of
active UBR VPTs drops below the value of this attribute. The
current number of active UBR VPTs is indicated by the Ubr/0
vptUsage operational attribute.
VALUES (
16385 = sameAsCa
)
Parsed from file nortelPP-atmCoreV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-AtmCoreMIB
This attribute specifies the maximum number of UBR Vpts that can
be activated on this AtmIf. The value must not exceed the maxVpts
attribute of the parent CA component.
If this attribute is specified as sameAsCa, the maximum number of
Vpts is defined by the AtmIf/n CA maxVpts attribute.
Changes to this attribute do not affect existing Vpts. If the value is
changed to a number smaller than the current number of active
UBR VPTs, no new UBR VPTs are admitted until the number of
active UBR VPTs drops below the value of this attribute. The
current number of active UBR VPTs is indicated by the Ubr/0
vptUsage operational attribute.
VALUES (
16385 = sameAsCa
)
Parsed from file Nortel-Magellan-Passport-AtmCoreMIB.mib
Module: Nortel-Magellan-Passport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-AtmCoreMIB
[Automatically extracted from oidview.com]
atmIfCAUbrMaxVpts OBJECT-TYPE SYNTAX Unsigned32 (0..4096 | 16385) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum number of UBR Vpts that can be activated on this AtmIf. The value must not exceed the maxVpts attribute of the parent CA component. If this attribute is specified as sameAsCa, the maximum number of Vpts is defined by the AtmIf/n CA maxVpts attribute. Changes to this attribute do not affect existing Vpts. If the value is changed to a number smaller than the current number of active UBR VPTs, no new UBR VPTs are admitted until the number of active UBR VPTs drops below the value of this attribute. The current number of active UBR VPTs is indicated by the Ubr/0 vptUsage operational attribute. VALUES ( 16385 = sameAsCa )" DEFVAL { 16385 } ::= { atmIfCAUbrProvEntry 7 }
atmIfCAUbrMaxVpts OBJECT-TYPE SYNTAX Unsigned32 (0..4096 | 16385) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum number of UBR Vpts that can be activated on this AtmIf. The value must not exceed the maxVpts attribute of the parent CA component. If this attribute is specified as sameAsCa, the maximum number of Vpts is defined by the AtmIf/n CA maxVpts attribute. Changes to this attribute do not affect existing Vpts. If the value is changed to a number smaller than the current number of active UBR VPTs, no new UBR VPTs are admitted until the number of active UBR VPTs drops below the value of this attribute. The current number of active UBR VPTs is indicated by the Ubr/0 vptUsage operational attribute. VALUES ( 16385 = sameAsCa )" DEFVAL { 16385 } ::= { atmIfCAUbrProvEntry 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.5 | atmIfCAUbrMaxVpcs | 0 | 0 | This attribute specifies the maximum number of UBR Vpcs that can be activated on this AtmIf. The value must not exceed the maxVp… |
1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.6 | atmIfCAUbrMaxVccs | 0 | 0 | This attribute specifies the maximum number of UBR Vccs that can be activated on this AtmIf, including UBR Vpt Vccs. The value m… |
1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.10 | atmIfCAUbrPool | 0 | 0 | This attribute specifies the bandwidth pool which is to be used to support the unspecified bit rate (UBR) service category excep… |
1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.11 | atmIfCAUbrMinimumCellRate | 0 | 0 | This attribute specifies the minimum cell rate (MCR) which is allocated from the UBR bandwidth pool for each UBR connection which… |
1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.12 | atmIfCAUbrTxQueueLimit | 0 | 0 | This attribute specifies the default maximum queue length for the emission queues used to buffer the traffic of the UBR service c… |
1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.13 | atmIfCAUbrMinPerVcQueueLimit | 0 | 0 | This attribute specifies the minimum queue limit for the per-VC queues of connections of the UBR service category. The queue lim… |
1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.14 | atmIfCAUbrPerVcQueueLimitReferenceRate | 0 | 0 | This attribute specifies the shaping rate to be used in computing the tolerable delay for per-VC queues of connections of the UB… |
1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.15 | atmIfCAUbrEmissionPriority | 0 | 0 | This attribute is not applicable and is ignored for CQC-based ATM cards. This attribute specifies the emission priority (EP) whi… |
1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.19 | atmIfCAUbrTrafficShaping | 0 | 0 | This attribute specifies the default traffic shaping option for connections of the UBR service category. An override to this def… |
1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.20 | atmIfCAUbrShapeRecoupPolicy | 0 | 0 | This attribute specifies the shaping recoup policy for the UBR service category. This is the policy which is used to recoup shap… |
1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.21 | atmIfCAUbrUnshapedTransmitQueueing | 0 | 0 | This attribute specifies the default queuing option for unshaped connections of the UBR service category. This attribute control… |
1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.22 | atmIfCAUbrUsageParameterControl | 0 | 0 | This attribute specifies the default usage parameter control (UPC) option for connections of the UBR service category. This attr… |
1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.23 | atmIfCAUbrWeightPolicy | 0 | 0 | This attribute specifies the policy which is applied when calculating the fairness weight for unshaped connections of the UBR se… |
1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.24 | atmIfCAUbrForceTagging | 0 | 0 | This attribute specifies the default of whether to force tagging (CLP=1) of all cells for all UBR connections. An override to th… |
1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.30 | atmIfCAUbrCdvt | 0 | 0 | This attribute specifies the default cell delay variation tolerance (CDVT) for all connections of the UBR service category. An ov… |
1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.40 | atmIfCAUbrHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVP and SVC UBR connections. It takes a value from 0 (hig… |
1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.50 | atmIfCAUbrSvcMpHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVC UBR point-to-multipoint connections. It takes a value… |