This attribute specifies the policy which is applied when calculating
the fairness weight for unshaped connections of the UBR service
category. The fairness weight for a connection determines the
relative amount of bandwidth which that connection obtains,
compared to other connections in the same service category.
Connections with equal weight get equal transmit opportunities.
Connections with higher weights get more transmit opportunities
compared with connections that have lower weights. An override to
this default may be specified for a provisioned connection under the
Vcd Tm or Vpd Tm component.
The fairness weight for a connection is directly proportional to the
value of one of the traffic descriptor parameters for that connection.
This attribute specifies which traffic descriptor parameter is used for
connections of the UBR service category.
This attribute is ignored on CQC-based ATM cards. This attribute is
also ignored on ATM IP cards if unshapedTransmitQueueing is set
for common queuing.
If this attribute is set to mcr, the fairness weight is proportional to
the default minimum cell rate (MCR) for UBR connections. If the
default minimum cell rate is 0, all UBR connections get a minimum
weight, which is 1.
If this attribute is set to pcr, the fairness weight is proportional to
the transmit peak cell rate (PCR) of a connection. Connections with
a higher PCR have a higher fairness weight. Connections with
txTrafficDescType 1 or 2 get a minimum weight, which is 1.
If this attribute is set to ecr, the fairness weight is proportional to
the equivalent cell rate (ECR) of a connection as calculated by
connection admission control (CAC). Connections with a higher
ECR have a higher fairness weight. Connections with an ECR of 0
get a minimum weight, which is 1.
The weight of a connection is visible in the Vcc Tm, Vpc Tm, or Vpt
Tm weight attribute.
This attribute does not apply to standard Vpt Vccs and basic Vpts.
Parsed from file nortelPP-atmCoreV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-AtmCoreMIB
This attribute specifies the policy which is applied when calculating
the fairness weight for unshaped connections of the UBR service
category. The fairness weight for a connection determines the
relative amount of bandwidth which that connection obtains,
compared to other connections in the same service category.
Connections with equal weight get equal transmit opportunities.
Connections with higher weights get more transmit opportunities
compared with connections that have lower weights. An override to
this default may be specified for a provisioned connection under the
Vcd Tm or Vpd Tm component.
The fairness weight for a connection is directly proportional to the
value of one of the traffic descriptor parameters for that connection.
This attribute specifies which traffic descriptor parameter is used for
connections of the UBR service category.
This attribute is ignored on CQC-based ATM cards. This attribute is
also ignored on ATM IP cards if unshapedTransmitQueueing is set
for common queuing.
If this attribute is set to mcr, the fairness weight is proportional to
the default minimum cell rate (MCR) for UBR connections. If the
default minimum cell rate is 0, all UBR connections get a minimum
weight, which is 1.
If this attribute is set to pcr, the fairness weight is proportional to
the transmit peak cell rate (PCR) of a connection. Connections with
a higher PCR have a higher fairness weight. Connections with
txTrafficDescType 1 or 2 get a minimum weight, which is 1.
If this attribute is set to ecr, the fairness weight is proportional to
the equivalent cell rate (ECR) of a connection as calculated by
connection admission control (CAC). Connections with a higher
ECR have a higher fairness weight. Connections with an ECR of 0
get a minimum weight, which is 1.
The weight of a connection is visible in the Vcc Tm, Vpc Tm, or Vpt
Tm weight attribute.
This attribute does not apply to standard Vpt Vccs and basic Vpts.
Parsed from file Nortel-Magellan-Passport-AtmCoreMIB.mib
Module: Nortel-Magellan-Passport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-AtmCoreMIB
[Automatically extracted from oidview.com]
atmIfCAUbrWeightPolicy OBJECT-TYPE SYNTAX INTEGER { mcr(0), pcr(2), ecr(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the policy which is applied when calculating the fairness weight for unshaped connections of the UBR service category. The fairness weight for a connection determines the relative amount of bandwidth which that connection obtains, compared to other connections in the same service category. Connections with equal weight get equal transmit opportunities. Connections with higher weights get more transmit opportunities compared with connections that have lower weights. An override to this default may be specified for a provisioned connection under the Vcd Tm or Vpd Tm component. The fairness weight for a connection is directly proportional to the value of one of the traffic descriptor parameters for that connection. This attribute specifies which traffic descriptor parameter is used for connections of the UBR service category. This attribute is ignored on CQC-based ATM cards. This attribute is also ignored on ATM IP cards if unshapedTransmitQueueing is set for common queuing. If this attribute is set to mcr, the fairness weight is proportional to the default minimum cell rate (MCR) for UBR connections. If the default minimum cell rate is 0, all UBR connections get a minimum weight, which is 1. If this attribute is set to pcr, the fairness weight is proportional to the transmit peak cell rate (PCR) of a connection. Connections with a higher PCR have a higher fairness weight. Connections with txTrafficDescType 1 or 2 get a minimum weight, which is 1. If this attribute is set to ecr, the fairness weight is proportional to the equivalent cell rate (ECR) of a connection as calculated by connection admission control (CAC). Connections with a higher ECR have a higher fairness weight. Connections with an ECR of 0 get a minimum weight, which is 1. The weight of a connection is visible in the Vcc Tm, Vpc Tm, or Vpt Tm weight attribute. This attribute does not apply to standard Vpt Vccs and basic Vpts." DEFVAL { pcr } ::= { atmIfCAUbrProvEntry 23 }
atmIfCAUbrWeightPolicy OBJECT-TYPE SYNTAX INTEGER { mcr(0), pcr(2), ecr(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the policy which is applied when calculating the fairness weight for unshaped connections of the UBR service category. The fairness weight for a connection determines the relative amount of bandwidth which that connection obtains, compared to other connections in the same service category. Connections with equal weight get equal transmit opportunities. Connections with higher weights get more transmit opportunities compared with connections that have lower weights. An override to this default may be specified for a provisioned connection under the Vcd Tm or Vpd Tm component. The fairness weight for a connection is directly proportional to the value of one of the traffic descriptor parameters for that connection. This attribute specifies which traffic descriptor parameter is used for connections of the UBR service category. This attribute is ignored on CQC-based ATM cards. This attribute is also ignored on ATM IP cards if unshapedTransmitQueueing is set for common queuing. If this attribute is set to mcr, the fairness weight is proportional to the default minimum cell rate (MCR) for UBR connections. If the default minimum cell rate is 0, all UBR connections get a minimum weight, which is 1. If this attribute is set to pcr, the fairness weight is proportional to the transmit peak cell rate (PCR) of a connection. Connections with a higher PCR have a higher fairness weight. Connections with txTrafficDescType 1 or 2 get a minimum weight, which is 1. If this attribute is set to ecr, the fairness weight is proportional to the equivalent cell rate (ECR) of a connection as calculated by connection admission control (CAC). Connections with a higher ECR have a higher fairness weight. Connections with an ECR of 0 get a minimum weight, which is 1. The weight of a connection is visible in the Vcc Tm, Vpc Tm, or Vpt Tm weight attribute. This attribute does not apply to standard Vpt Vccs and basic Vpts." DEFVAL { pcr } ::= { atmIfCAUbrProvEntry 23 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.5 | atmIfCAUbrMaxVpcs | 0 | 0 | This attribute specifies the maximum number of UBR Vpcs that can be activated on this AtmIf. The value must not exceed the maxVp… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.6 | atmIfCAUbrMaxVccs | 0 | 0 | This attribute specifies the maximum number of UBR Vccs that can be activated on this AtmIf, including UBR Vpt Vccs. The value m… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.7 | atmIfCAUbrMaxVpts | 0 | 0 | This attribute specifies the maximum number of UBR Vpts that can be activated on this AtmIf. The value must not exceed the maxVp… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.10 | atmIfCAUbrPool | 0 | 0 | This attribute specifies the bandwidth pool which is to be used to support the unspecified bit rate (UBR) service category excep… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.11 | atmIfCAUbrMinimumCellRate | 0 | 0 | This attribute specifies the minimum cell rate (MCR) which is allocated from the UBR bandwidth pool for each UBR connection which… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.12 | atmIfCAUbrTxQueueLimit | 0 | 0 | This attribute specifies the default maximum queue length for the emission queues used to buffer the traffic of the UBR service c… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.13 | atmIfCAUbrMinPerVcQueueLimit | 0 | 0 | This attribute specifies the minimum queue limit for the per-VC queues of connections of the UBR service category. The queue lim… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.14 | atmIfCAUbrPerVcQueueLimitReferenceRate | 0 | 0 | This attribute specifies the shaping rate to be used in computing the tolerable delay for per-VC queues of connections of the UB… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.15 | atmIfCAUbrEmissionPriority | 0 | 0 | This attribute is not applicable and is ignored for CQC-based ATM cards. This attribute specifies the emission priority (EP) whi… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.19 | atmIfCAUbrTrafficShaping | 0 | 0 | This attribute specifies the default traffic shaping option for connections of the UBR service category. An override to this def… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.20 | atmIfCAUbrShapeRecoupPolicy | 0 | 0 | This attribute specifies the shaping recoup policy for the UBR service category. This is the policy which is used to recoup shap… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.21 | atmIfCAUbrUnshapedTransmitQueueing | 0 | 0 | This attribute specifies the default queuing option for unshaped connections of the UBR service category. This attribute control… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.22 | atmIfCAUbrUsageParameterControl | 0 | 0 | This attribute specifies the default usage parameter control (UPC) option for connections of the UBR service category. This attr… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.24 | atmIfCAUbrForceTagging | 0 | 0 | This attribute specifies the default of whether to force tagging (CLP=1) of all cells for all UBR connections. An override to th… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.30 | atmIfCAUbrCdvt | 0 | 0 | This attribute specifies the default cell delay variation tolerance (CDVT) for all connections of the UBR service category. An ov… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.40 | atmIfCAUbrHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVP and SVC UBR connections. It takes a value from 0 (hig… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.50 | atmIfCAUbrSvcMpHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVC UBR point-to-multipoint connections. It takes a value… |