This attribute specifies the default queuing option for unshaped
connections of the UBR service category. This attribute controls
whether common or per-VC queueing is used.
Per-VC queueing means that each connection has its own buffering
and queue limits.
Common queueing means that cells are queued in First In First Out
order on a common queue. The common queue has one set of
congestion control levels for all cells enqueued on it. For ATM IP
cards, there is one common queue for the UBR service category.
For CQC-based ATM cards, there is one common queue which is
shared by the nrt-VBR, ABR and UBR service categories.
For ATM IP cards, if traffic shaping for this service category is
disabled, this attribute may take any of the three values. In this case,
the value autoConfigure is interpreted to mean per-VC queueing.
For ATM IP cards, if traffic shaping for this service category is not
disabled, the only permitted values are perVc and autoConfigure.
In this case, the result is that all connections use per-VC queueing.
For CQC-based ATM cards, if the perVcQueueInterfaces attribute
of the Lp Eng Arc Cqc component permits shaping for this
interface, then this attribute may take any of the three values. In this
case, the value autoConfigure is interpreted to mean per-VC
queueing.
For CQC-based ATM cards, if the perVcQueueInterfaces attribute
of the Lp Eng Arc Cqc component does not permit shaping for this
interface, then this attribute may take the values common or
autoConfigure. In this case, the value autoConfigure is interpreted
to mean common queueing.
If this attribute is set to autoConfigure, an override to this default
may be specified for a provisioned connection under the Vcd Tm or
Vpd Tm component.
The opUnshapedTransmitQueueing attribute of this component
indicates whether the transmit queueing is perVc or common.
This attribute does not apply to standard Vpt Vccs and basic Vpts.
Parsed from file nortelPP-atmCoreV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-AtmCoreMIB
This attribute specifies the default queuing option for unshaped
connections of the UBR service category. This attribute controls
whether common or per-VC queueing is used.
Per-VC queueing means that each connection has its own buffering
and queue limits.
Common queueing means that cells are queued in First In First Out
order on a common queue. The common queue has one set of
congestion control levels for all cells enqueued on it. For ATM IP
cards, there is one common queue for the UBR service category.
For CQC-based ATM cards, there is one common queue which is
shared by the nrt-VBR, ABR and UBR service categories.
For ATM IP cards, if traffic shaping for this service category is
disabled, this attribute may take any of the three values. In this case,
the value autoConfigure is interpreted to mean per-VC queueing.
For ATM IP cards, if traffic shaping for this service category is not
disabled, the only permitted values are perVc and autoConfigure.
In this case, the result is that all connections use per-VC queueing.
For CQC-based ATM cards, if the perVcQueueInterfaces attribute
of the Lp Eng Arc Cqc component permits shaping for this
interface, then this attribute may take any of the three values. In this
case, the value autoConfigure is interpreted to mean per-VC
queueing.
For CQC-based ATM cards, if the perVcQueueInterfaces attribute
of the Lp Eng Arc Cqc component does not permit shaping for this
interface, then this attribute may take the values common or
autoConfigure. In this case, the value autoConfigure is interpreted
to mean common queueing.
If this attribute is set to autoConfigure, an override to this default
may be specified for a provisioned connection under the Vcd Tm or
Vpd Tm component.
The opUnshapedTransmitQueueing attribute of this component
indicates whether the transmit queueing is perVc or common.
This attribute does not apply to standard Vpt Vccs and basic Vpts.
Parsed from file Nortel-Magellan-Passport-AtmCoreMIB.mib
Module: Nortel-Magellan-Passport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-AtmCoreMIB
[Automatically extracted from oidview.com]
atmIfCAUbrUnshapedTransmitQueueing OBJECT-TYPE SYNTAX INTEGER { perVc(0), common(1), autoConfigure(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default queuing option for unshaped connections of the UBR service category. This attribute controls whether common or per-VC queueing is used. Per-VC queueing means that each connection has its own buffering and queue limits. Common queueing means that cells are queued in First In First Out order on a common queue. The common queue has one set of congestion control levels for all cells enqueued on it. For ATM IP cards, there is one common queue for the UBR service category. For CQC-based ATM cards, there is one common queue which is shared by the nrt-VBR, ABR and UBR service categories. For ATM IP cards, if traffic shaping for this service category is disabled, this attribute may take any of the three values. In this case, the value autoConfigure is interpreted to mean per-VC queueing. For ATM IP cards, if traffic shaping for this service category is not disabled, the only permitted values are perVc and autoConfigure. In this case, the result is that all connections use per-VC queueing. For CQC-based ATM cards, if the perVcQueueInterfaces attribute of the Lp Eng Arc Cqc component permits shaping for this interface, then this attribute may take any of the three values. In this case, the value autoConfigure is interpreted to mean per-VC queueing. For CQC-based ATM cards, if the perVcQueueInterfaces attribute of the Lp Eng Arc Cqc component does not permit shaping for this interface, then this attribute may take the values common or autoConfigure. In this case, the value autoConfigure is interpreted to mean common queueing. If this attribute is set to autoConfigure, an override to this default may be specified for a provisioned connection under the Vcd Tm or Vpd Tm component. The opUnshapedTransmitQueueing attribute of this component indicates whether the transmit queueing is perVc or common. This attribute does not apply to standard Vpt Vccs and basic Vpts." DEFVAL { autoConfigure } ::= { atmIfCAUbrProvEntry 21 }
atmIfCAUbrUnshapedTransmitQueueing OBJECT-TYPE SYNTAX INTEGER { perVc(0), common(1), autoConfigure(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default queuing option for unshaped connections of the UBR service category. This attribute controls whether common or per-VC queueing is used. Per-VC queueing means that each connection has its own buffering and queue limits. Common queueing means that cells are queued in First In First Out order on a common queue. The common queue has one set of congestion control levels for all cells enqueued on it. For ATM IP cards, there is one common queue for the UBR service category. For CQC-based ATM cards, there is one common queue which is shared by the nrt-VBR, ABR and UBR service categories. For ATM IP cards, if traffic shaping for this service category is disabled, this attribute may take any of the three values. In this case, the value autoConfigure is interpreted to mean per-VC queueing. For ATM IP cards, if traffic shaping for this service category is not disabled, the only permitted values are perVc and autoConfigure. In this case, the result is that all connections use per-VC queueing. For CQC-based ATM cards, if the perVcQueueInterfaces attribute of the Lp Eng Arc Cqc component permits shaping for this interface, then this attribute may take any of the three values. In this case, the value autoConfigure is interpreted to mean per-VC queueing. For CQC-based ATM cards, if the perVcQueueInterfaces attribute of the Lp Eng Arc Cqc component does not permit shaping for this interface, then this attribute may take the values common or autoConfigure. In this case, the value autoConfigure is interpreted to mean common queueing. If this attribute is set to autoConfigure, an override to this default may be specified for a provisioned connection under the Vcd Tm or Vpd Tm component. The opUnshapedTransmitQueueing attribute of this component indicates whether the transmit queueing is perVc or common. This attribute does not apply to standard Vpt Vccs and basic Vpts." DEFVAL { autoConfigure } ::= { atmIfCAUbrProvEntry 21 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.5 | atmIfCAUbrMaxVpcs | 0 | 0 | This attribute specifies the maximum number of UBR Vpcs that can be activated on this AtmIf. The value must not exceed the maxVp… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.6 | atmIfCAUbrMaxVccs | 0 | 0 | This attribute specifies the maximum number of UBR Vccs that can be activated on this AtmIf, including UBR Vpt Vccs. The value m… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.7 | atmIfCAUbrMaxVpts | 0 | 0 | This attribute specifies the maximum number of UBR Vpts that can be activated on this AtmIf. The value must not exceed the maxVp… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.10 | atmIfCAUbrPool | 0 | 0 | This attribute specifies the bandwidth pool which is to be used to support the unspecified bit rate (UBR) service category excep… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.11 | atmIfCAUbrMinimumCellRate | 0 | 0 | This attribute specifies the minimum cell rate (MCR) which is allocated from the UBR bandwidth pool for each UBR connection which… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.12 | atmIfCAUbrTxQueueLimit | 0 | 0 | This attribute specifies the default maximum queue length for the emission queues used to buffer the traffic of the UBR service c… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.13 | atmIfCAUbrMinPerVcQueueLimit | 0 | 0 | This attribute specifies the minimum queue limit for the per-VC queues of connections of the UBR service category. The queue lim… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.14 | atmIfCAUbrPerVcQueueLimitReferenceRate | 0 | 0 | This attribute specifies the shaping rate to be used in computing the tolerable delay for per-VC queues of connections of the UB… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.15 | atmIfCAUbrEmissionPriority | 0 | 0 | This attribute is not applicable and is ignored for CQC-based ATM cards. This attribute specifies the emission priority (EP) whi… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.19 | atmIfCAUbrTrafficShaping | 0 | 0 | This attribute specifies the default traffic shaping option for connections of the UBR service category. An override to this def… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.20 | atmIfCAUbrShapeRecoupPolicy | 0 | 0 | This attribute specifies the shaping recoup policy for the UBR service category. This is the policy which is used to recoup shap… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.22 | atmIfCAUbrUsageParameterControl | 0 | 0 | This attribute specifies the default usage parameter control (UPC) option for connections of the UBR service category. This attr… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.23 | atmIfCAUbrWeightPolicy | 0 | 0 | This attribute specifies the policy which is applied when calculating the fairness weight for unshaped connections of the UBR se… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.24 | atmIfCAUbrForceTagging | 0 | 0 | This attribute specifies the default of whether to force tagging (CLP=1) of all cells for all UBR connections. An override to th… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.30 | atmIfCAUbrCdvt | 0 | 0 | This attribute specifies the default cell delay variation tolerance (CDVT) for all connections of the UBR service category. An ov… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.40 | atmIfCAUbrHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVP and SVC UBR connections. It takes a value from 0 (hig… |
| 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.50 | atmIfCAUbrSvcMpHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVC UBR point-to-multipoint connections. It takes a value… |