This attribute specifies the gain in dB that is applied to data coming
from outside the network before it is transferred across the network.
It applies to voice, modem and fax traffic. For example, ingress gain
is applied to audio data coming from a PBX. If ingressAudioGain is
negative, a loss is applied.
ingressAudioGain and egressAudioGain are used in loss planning,
which is the configuration of the devices in a network to ensure that
the signal level from any point in the network to any other point is
correct.
ingressAudioGain is ignored for calls on 1pDS1V and 1pE1V cards.
Parsed from file nortelPP-voiceNetworkingV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-VoiceNetworkingMIB
This attribute specifies the gain in dB that is applied to data coming
from outside the network before it is transferred across the network.
It applies to voice, modem and fax traffic. For example, ingress gain
is applied to audio data coming from a PBX. If ingressAudioGain is
negative, a loss is applied.
ingressAudioGain and egressAudioGain are used in loss planning,
which is the configuration of the devices in a network to ensure that
the signal level from any point in the network to any other point is
correct.
ingressAudioGain is ignored for calls on 1pDS1V and 1pE1V cards.
Parsed from file Nortel-Magellan-Passport-VoiceNetworkingMIB.mib
Module: Nortel-Magellan-Passport-VoiceNetworkingMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-VoiceNetworkingMIB
[Automatically extracted from oidview.com]
vRouteInterfaceIngressAudioGain OBJECT-TYPE SYNTAX INTEGER (-12..12) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the gain in dB that is applied to data coming from outside the network before it is transferred across the network. It applies to voice, modem and fax traffic. For example, ingress gain is applied to audio data coming from a PBX. If ingressAudioGain is negative, a loss is applied. ingressAudioGain and egressAudioGain are used in loss planning, which is the configuration of the devices in a network to ensure that the signal level from any point in the network to any other point is correct. ingressAudioGain is ignored for calls on 1pDS1V and 1pE1V cards." DEFVAL { 0 } ::= { vRouteInterfaceProvEntry 1 }
vRouteInterfaceIngressAudioGain OBJECT-TYPE SYNTAX INTEGER (-12..12) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the gain in dB that is applied to data coming from outside the network before it is transferred across the network. It applies to voice, modem and fax traffic. For example, ingress gain is applied to audio data coming from a PBX. If ingressAudioGain is negative, a loss is applied. ingressAudioGain and egressAudioGain are used in loss planning, which is the configuration of the devices in a network to ensure that the signal level from any point in the network to any other point is correct. ingressAudioGain is ignored for calls on 1pDS1V and 1pE1V cards." DEFVAL { 0 } ::= { vRouteInterfaceProvEntry 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.2 | vRouteInterfaceEgressAudioGain | 0 | 0 | This attribute specifies the gain in dB that is applied to data leaving the network. It applies to voice, modem and fax traffic.… |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.3 | vRouteInterfaceTandemPassThrough | 0 | 0 | This attribute specifies whether tandem pass through is desired. If tandemPassThrough is enabled, tandem pass through is used if… |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.5 | vRouteInterfaceEchoCancellation | 0 | 0 | This attribute has been migrated to echoCancellation. |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.6 | vRouteInterfaceComfortNoiseCap | 0 | 0 | This attribute specifies the maximum level at which comfort noise is generated. The comfort noise is limited by comfortNoiseCap … |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.7 | vRouteInterfaceSpeechHangoverTime | 0 | 0 | This attribute specifies the time after the end of speech before silence suppression starts. It applies only to voice traffic. I… |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.8 | vRouteInterfaceFaxHangoverTimeG711G726 | 0 | 0 | This attribute specifies the time after the end of fax traffic before G.711/G.726 fax idle suppression starts. It applies only i… |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.9 | vRouteInterfaceModemFaxSpeechDiscrim | 0 | 0 | This attribute specifies whether this VoiceRoute differentiates between modemFax traffic and speech. If modemFaxSpeechDiscrim is … |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.10 | vRouteInterfaceEchoTailDelay | 0 | 0 | This attribute specifies the maximum echo canceller tail delay coverage. It should be selected higher than the summation of the r… |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.11 | vRouteInterfaceEchoReturnLoss | 0 | 0 | This attribute specifies the echo return loss parameter of the echo canceller. 0 db is the normal value for most line conditions… |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.15 | vRouteInterfaceEcanBypassMode | 0 | 0 | This attribute specifies when version 2 internal echo cancellers are placed in bypass mode on this VoiceRoute. This attribute o… |