This attribute specifies the maximum echo canceller tail delay
coverage. It should be selected higher than the summation of the
round trip delay of echo and hybrid response time. A 32 msec
setting is good for a radius of 2700 km, assuming that the signal is
going through 4 exchanges and the hybrid response time is 6 msec.
A 64 msec setting offers even greater coverage (more distance or
more switches), with comparable convergence time. The
recommended setting is 64 msec. This attribute is not used on
DS1V, E1V, 1pDS1V, 1pE1V, J2MV, 1pE1Mvp, 1pDS1Mvp, or
1pTTC2mMvp card.
Parsed from file nortelPP-voiceNetworkingV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-VoiceNetworkingMIB
This attribute specifies the maximum echo canceller tail delay
coverage. It should be selected higher than the summation of the
round trip delay of echo and hybrid response time. A 32 msec
setting is good for a radius of 2700 km, assuming that the signal is
going through 4 exchanges and the hybrid response time is 6 msec.
A 64 msec setting offers even greater coverage (more distance or
more switches), with comparable convergence time. The
recommended setting is 64 msec. This attribute is not used on
DS1V, E1V, 1pDS1V, 1pE1V, J2MV, 1pE1Mvp, 1pDS1Mvp, or
1pTTC2mMvp card.
Parsed from file Nortel-Magellan-Passport-VoiceNetworkingMIB.mib
Module: Nortel-Magellan-Passport-VoiceNetworkingMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-VoiceNetworkingMIB
[Automatically extracted from oidview.com]
vRouteInterfaceEchoTailDelay OBJECT-TYPE SYNTAX Unsigned32 (32 | 64) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum echo canceller tail delay coverage. It should be selected higher than the summation of the round trip delay of echo and hybrid response time. A 32 msec setting is good for a radius of 2700 km, assuming that the signal is going through 4 exchanges and the hybrid response time is 6 msec. A 64 msec setting offers even greater coverage (more distance or more switches), with comparable convergence time. The recommended setting is 64 msec. This attribute is not used on DS1V, E1V, 1pDS1V, 1pE1V, J2MV, 1pE1Mvp, 1pDS1Mvp, or 1pTTC2mMvp card." DEFVAL { 64 } ::= { vRouteInterfaceProvEntry 10 }
vRouteInterfaceEchoTailDelay OBJECT-TYPE SYNTAX Unsigned32 (32 | 64) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum echo canceller tail delay coverage. It should be selected higher than the summation of the round trip delay of echo and hybrid response time. A 32 msec setting is good for a radius of 2700 km, assuming that the signal is going through 4 exchanges and the hybrid response time is 6 msec. A 64 msec setting offers even greater coverage (more distance or more switches), with comparable convergence time. The recommended setting is 64 msec. This attribute is not used on DS1V, E1V, 1pDS1V, 1pE1V, J2MV, 1pE1Mvp, 1pDS1Mvp, or 1pTTC2mMvp card." DEFVAL { 64 } ::= { vRouteInterfaceProvEntry 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.1 | vRouteInterfaceIngressAudioGain | 0 | 0 | This attribute specifies the gain in dB that is applied to data coming from outside the network before it is transferred across … |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.2 | vRouteInterfaceEgressAudioGain | 0 | 0 | This attribute specifies the gain in dB that is applied to data leaving the network. It applies to voice, modem and fax traffic.… |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.3 | vRouteInterfaceTandemPassThrough | 0 | 0 | This attribute specifies whether tandem pass through is desired. If tandemPassThrough is enabled, tandem pass through is used if… |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.5 | vRouteInterfaceEchoCancellation | 0 | 0 | This attribute has been migrated to echoCancellation. |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.6 | vRouteInterfaceComfortNoiseCap | 0 | 0 | This attribute specifies the maximum level at which comfort noise is generated. The comfort noise is limited by comfortNoiseCap … |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.7 | vRouteInterfaceSpeechHangoverTime | 0 | 0 | This attribute specifies the time after the end of speech before silence suppression starts. It applies only to voice traffic. I… |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.8 | vRouteInterfaceFaxHangoverTimeG711G726 | 0 | 0 | This attribute specifies the time after the end of fax traffic before G.711/G.726 fax idle suppression starts. It applies only i… |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.9 | vRouteInterfaceModemFaxSpeechDiscrim | 0 | 0 | This attribute specifies whether this VoiceRoute differentiates between modemFax traffic and speech. If modemFaxSpeechDiscrim is … |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.11 | vRouteInterfaceEchoReturnLoss | 0 | 0 | This attribute specifies the echo return loss parameter of the echo canceller. 0 db is the normal value for most line conditions… |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.15 | vRouteInterfaceEcanBypassMode | 0 | 0 | This attribute specifies when version 2 internal echo cancellers are placed in bypass mode on this VoiceRoute. This attribute o… |