This attribute specifies the time after the end of fax traffic before
G.711/G.726 fax idle suppression starts. It applies only if the
negotiated fax encoding, available in Vsr Svs Framer
negotiatedEncoding, is g711, g726 or g711G726 and Vsr Svs
Framer negotiatedFisG711G726 is on.
Higher values of faxHangoverTimeG711G726 reduce undesirable
clipping but increase bandwidth usage.
faxHangoverTimeG711G726 is not used on DS1V, E1V, 1pDS1V,
1pE1V and J2MV cards.
Parsed from file nortelPP-voiceNetworkingV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-VoiceNetworkingMIB
This attribute specifies the time after the end of fax traffic before
G.711/G.726 fax idle suppression starts. It applies only if the
negotiated fax encoding, available in Vsr Svs Framer
negotiatedEncoding, is g711, g726 or g711G726 and Vsr Svs
Framer negotiatedFisG711G726 is on.
Higher values of faxHangoverTimeG711G726 reduce undesirable
clipping but increase bandwidth usage.
faxHangoverTimeG711G726 is not used on DS1V, E1V, 1pDS1V,
1pE1V and J2MV cards.
Parsed from file Nortel-Magellan-Passport-VoiceNetworkingMIB.mib
Module: Nortel-Magellan-Passport-VoiceNetworkingMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-VoiceNetworkingMIB
[Automatically extracted from oidview.com]
vRouteInterfaceFaxHangoverTimeG711G726 OBJECT-TYPE SYNTAX Unsigned32 (300..20000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the time after the end of fax traffic before G.711/G.726 fax idle suppression starts. It applies only if the negotiated fax encoding, available in Vsr Svs Framer negotiatedEncoding, is g711, g726 or g711G726 and Vsr Svs Framer negotiatedFisG711G726 is on. Higher values of faxHangoverTimeG711G726 reduce undesirable clipping but increase bandwidth usage. faxHangoverTimeG711G726 is not used on DS1V, E1V, 1pDS1V, 1pE1V and J2MV cards." DEFVAL { 1000 } ::= { vRouteInterfaceProvEntry 8 }
vRouteInterfaceFaxHangoverTimeG711G726 OBJECT-TYPE SYNTAX Unsigned32 (300..20000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the time after the end of fax traffic before G.711/G.726 fax idle suppression starts. It applies only if the negotiated fax encoding, available in Vsr Svs Framer negotiatedEncoding, is g711, g726 or g711G726 and Vsr Svs Framer negotiatedFisG711G726 is on. Higher values of faxHangoverTimeG711G726 reduce undesirable clipping but increase bandwidth usage. faxHangoverTimeG711G726 is not used on DS1V, E1V, 1pDS1V, 1pE1V and J2MV cards." DEFVAL { 1000 } ::= { vRouteInterfaceProvEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.1 | vRouteInterfaceIngressAudioGain | 0 | 0 | This attribute specifies the gain in dB that is applied to data coming from outside the network before it is transferred across … |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.2 | vRouteInterfaceEgressAudioGain | 0 | 0 | This attribute specifies the gain in dB that is applied to data leaving the network. It applies to voice, modem and fax traffic.… |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.3 | vRouteInterfaceTandemPassThrough | 0 | 0 | This attribute specifies whether tandem pass through is desired. If tandemPassThrough is enabled, tandem pass through is used if… |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.5 | vRouteInterfaceEchoCancellation | 0 | 0 | This attribute has been migrated to echoCancellation. |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.6 | vRouteInterfaceComfortNoiseCap | 0 | 0 | This attribute specifies the maximum level at which comfort noise is generated. The comfort noise is limited by comfortNoiseCap … |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.7 | vRouteInterfaceSpeechHangoverTime | 0 | 0 | This attribute specifies the time after the end of speech before silence suppression starts. It applies only to voice traffic. I… |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.9 | vRouteInterfaceModemFaxSpeechDiscrim | 0 | 0 | This attribute specifies whether this VoiceRoute differentiates between modemFax traffic and speech. If modemFaxSpeechDiscrim is … |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.10 | vRouteInterfaceEchoTailDelay | 0 | 0 | This attribute specifies the maximum echo canceller tail delay coverage. It should be selected higher than the summation of the r… |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.11 | vRouteInterfaceEchoReturnLoss | 0 | 0 | This attribute specifies the echo return loss parameter of the echo canceller. 0 db is the normal value for most line conditions… |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.15 | vRouteInterfaceEcanBypassMode | 0 | 0 | This attribute specifies when version 2 internal echo cancellers are placed in bypass mode on this VoiceRoute. This attribute o… |