This attribute specifies the echo return loss parameter of the echo
canceller. 0 db is the normal value for most line conditions. If the
line quality is poor, in terms of echo, selecting a higher value may
allow the echo canceller to perform better. A side effect is that the
voice level is attenuated by the same amount, which may not always
be acceptable. This attribute is not used on DS1V, E1V, 1pDS1V,
1pE1V, J2MV, 1pE1Mvp, 1pDS1Mvp, or 1pTTC2mMvp card.
Parsed from file nortelPP-voiceNetworkingV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-VoiceNetworkingMIB
This attribute specifies the echo return loss parameter of the echo
canceller. 0 db is the normal value for most line conditions. If the
line quality is poor, in terms of echo, selecting a higher value may
allow the echo canceller to perform better. A side effect is that the
voice level is attenuated by the same amount, which may not always
be acceptable. This attribute is not used on DS1V, E1V, 1pDS1V,
1pE1V, J2MV, 1pE1Mvp, 1pDS1Mvp, or 1pTTC2mMvp card.
Parsed from file Nortel-Magellan-Passport-VoiceNetworkingMIB.mib
Module: Nortel-Magellan-Passport-VoiceNetworkingMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-VoiceNetworkingMIB
[Automatically extracted from oidview.com]
vRouteInterfaceEchoReturnLoss OBJECT-TYPE SYNTAX Unsigned32 (0 | 3 | 6) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the echo return loss parameter of the echo canceller. 0 db is the normal value for most line conditions. If the line quality is poor, in terms of echo, selecting a higher value may allow the echo canceller to perform better. A side effect is that the voice level is attenuated by the same amount, which may not always be acceptable. This attribute is not used on DS1V, E1V, 1pDS1V, 1pE1V, J2MV, 1pE1Mvp, 1pDS1Mvp, or 1pTTC2mMvp card." DEFVAL { 0 } ::= { vRouteInterfaceProvEntry 11 }
vRouteInterfaceEchoReturnLoss OBJECT-TYPE SYNTAX Unsigned32 (0 | 3 | 6) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the echo return loss parameter of the echo canceller. 0 db is the normal value for most line conditions. If the line quality is poor, in terms of echo, selecting a higher value may allow the echo canceller to perform better. A side effect is that the voice level is attenuated by the same amount, which may not always be acceptable. This attribute is not used on DS1V, E1V, 1pDS1V, 1pE1V, J2MV, 1pE1Mvp, 1pDS1Mvp, or 1pTTC2mMvp card." DEFVAL { 0 } ::= { vRouteInterfaceProvEntry 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.1 | vRouteInterfaceIngressAudioGain | 0 | 0 | This attribute specifies the gain in dB that is applied to data coming from outside the network before it is transferred across … |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.2 | vRouteInterfaceEgressAudioGain | 0 | 0 | This attribute specifies the gain in dB that is applied to data leaving the network. It applies to voice, modem and fax traffic.… |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.3 | vRouteInterfaceTandemPassThrough | 0 | 0 | This attribute specifies whether tandem pass through is desired. If tandemPassThrough is enabled, tandem pass through is used if… |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.5 | vRouteInterfaceEchoCancellation | 0 | 0 | This attribute has been migrated to echoCancellation. |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.6 | vRouteInterfaceComfortNoiseCap | 0 | 0 | This attribute specifies the maximum level at which comfort noise is generated. The comfort noise is limited by comfortNoiseCap … |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.7 | vRouteInterfaceSpeechHangoverTime | 0 | 0 | This attribute specifies the time after the end of speech before silence suppression starts. It applies only to voice traffic. I… |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.8 | vRouteInterfaceFaxHangoverTimeG711G726 | 0 | 0 | This attribute specifies the time after the end of fax traffic before G.711/G.726 fax idle suppression starts. It applies only i… |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.9 | vRouteInterfaceModemFaxSpeechDiscrim | 0 | 0 | This attribute specifies whether this VoiceRoute differentiates between modemFax traffic and speech. If modemFaxSpeechDiscrim is … |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.10 | vRouteInterfaceEchoTailDelay | 0 | 0 | This attribute specifies the maximum echo canceller tail delay coverage. It should be selected higher than the summation of the r… |
| 1.3.6.1.4.1.562.2.4.1.116.3.10.1.15 | vRouteInterfaceEcanBypassMode | 0 | 0 | This attribute specifies when version 2 internal echo cancellers are placed in bypass mode on this VoiceRoute. This attribute o… |