This attribute specifies the data path to be used by Virtual Circuits
on this interface. The value of the dataPath attribute in the Dna
component is overridden by this attribute if the value is not
useDnaValue.
This value applies to the connection after data transfer state is
reached. All the data and control trafic will be sent using this data
path. If the provisioned dataPath is not available the connection is
not established.
The value of the dataPath is signalled by both ends of the
connection. If this value is not the same at both ends dprsOnly is
used for the duration of the connection.
A virtual circuit connection is always established using dprsOnly
even if this attribute is provisioned as some other value.
dprsOnly - dynamic packet routing system is used
dprsMcsOnly - dprs Multi-Service Cut-Through Switching path is
used.
dprsMcsFirst - dprs Multi-Service Cut-Through Switching path is
used if it is available. If it is not avaliable dprsOnly is used.
useDnaValue - use the value provisioned in Dna component.
Parsed from file nortelPP-vcTesterV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-VcTesterMIB
This attribute specifies the data path to be used by Virtual Circuits
on this interface. The value of the dataPath attribute in the Dna
component is overridden by this attribute if the value is not
useDnaValue.
This value applies to the connection after data transfer state is
reached. All the data and control trafic will be sent using this data
path. If the provisioned dataPath is not available the connection is
not established.
The value of the dataPath is signalled by both ends of the
connection. If this value is not the same at both ends dprsOnly is
used for the duration of the connection.
A virtual circuit connection is always established using dprsOnly
even if this attribute is provisioned as some other value.
dprsOnly - dynamic packet routing system is used
dprsMcsOnly - dprs Multi-Service Cut-Through Switching path is
used.
dprsMcsFirst - dprs Multi-Service Cut-Through Switching path is
used if it is available. If it is not avaliable dprsOnly is used.
useDnaValue - use the value provisioned in Dna component.
Parsed from file Nortel-Magellan-Passport-VcTesterMIB.mib
Module: Nortel-Magellan-Passport-VcTesterMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-VcTesterMIB
[Automatically extracted from oidview.com]
vctDcDataPath OBJECT-TYPE SYNTAX INTEGER { dprsOnly(0), dprsMcsOnly(1), dprsMcsFirst(2), useDnaValue(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the data path to be used by Virtual Circuits on this interface. The value of the dataPath attribute in the Dna component is overridden by this attribute if the value is not useDnaValue. This value applies to the connection after data transfer state is reached. All the data and control trafic will be sent using this data path. If the provisioned dataPath is not available the connection is not established. The value of the dataPath is signalled by both ends of the connection. If this value is not the same at both ends dprsOnly is used for the duration of the connection. A virtual circuit connection is always established using dprsOnly even if this attribute is provisioned as some other value. dprsOnly - dynamic packet routing system is used dprsMcsOnly - dprs Multi-Service Cut-Through Switching path is used. dprsMcsFirst - dprs Multi-Service Cut-Through Switching path is used if it is available. If it is not avaliable dprsOnly is used. useDnaValue - use the value provisioned in Dna component." DEFVAL { dprsOnly } ::= { vctDcOptionsEntry 11 }
vctDcDataPath OBJECT-TYPE SYNTAX INTEGER { dprsOnly(0), dprsMcsOnly(1), dprsMcsFirst(2), useDnaValue(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the data path to be used by Virtual Circuits on this interface. The value of the dataPath attribute in the Dna component is overridden by this attribute if the value is not useDnaValue. This value applies to the connection after data transfer state is reached. All the data and control trafic will be sent using this data path. If the provisioned dataPath is not available the connection is not established. The value of the dataPath is signalled by both ends of the connection. If this value is not the same at both ends dprsOnly is used for the duration of the connection. A virtual circuit connection is always established using dprsOnly even if this attribute is provisioned as some other value. dprsOnly - dynamic packet routing system is used dprsMcsOnly - dprs Multi-Service Cut-Through Switching path is used. dprsMcsFirst - dprs Multi-Service Cut-Through Switching path is used if it is available. If it is not avaliable dprsOnly is used. useDnaValue - use the value provisioned in Dna component." DEFVAL { dprsOnly } ::= { vctDcOptionsEntry 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.5130.3.10.1.1 | vctDcLocalNpi | 0 | 0 | This attribute specifies the Numbering Plan Indicator (NPI) of the localDna. |
| 1.3.6.1.4.1.562.2.4.1.5130.3.10.1.2 | vctDcLocalDna | 0 | 0 | This attribute specifies the Data Network Address (Dna) of the local DTE. This address is used in formatting of call request to r… |
| 1.3.6.1.4.1.562.2.4.1.5130.3.10.1.3 | vctDcRemoteNpi | 0 | 0 | Remote numbering Plan Indicator (Npi) indicates the numbering plan used in the remoteDna. |
| 1.3.6.1.4.1.562.2.4.1.5130.3.10.1.4 | vctDcRemoteDna | 0 | 0 | This attribute specifies the Data Network Address (Dna) of the remote. This is the called (destination) DTE address (Dna) to whi… |
| 1.3.6.1.4.1.562.2.4.1.5130.3.10.1.5 | vctDcRemoteLcn | 0 | 0 | This attribute provides the remote LCN (Logical Channel Number) - it is used only for PVCs, where attribute type is set to perman… |
| 1.3.6.1.4.1.562.2.4.1.5130.3.10.1.6 | vctDcType | 0 | 0 | This attribute specifies the type of Vc call: switched, permanentMaster, permanentSlave, permanentSlaveWithBackup, permanentBackupSl… |
| 1.3.6.1.4.1.562.2.4.1.5130.3.10.1.7 | vctDcSvcAutoCallRetry | 0 | 0 | svcAutoCallRetry is used only for switched calls, in which case the attribute type is set to switched. Otherwise, this attribute… |
| 1.3.6.1.4.1.562.2.4.1.5130.3.10.1.8 | vctDcUserData | 0 | 0 | This attribute contains the user data, if present. userData is a 0 to 16 length string which is appended to the call request pac… |
| 1.3.6.1.4.1.562.2.4.1.5130.3.10.1.10 | vctDcDiscardPriority | 0 | 0 | This attribute specifies the discard priority for outgoing call using this DLCI. The discard priority has three provisioning val… |
| 1.3.6.1.4.1.562.2.4.1.5130.3.10.1.13 | vctDcCugIndex | 0 | 0 | This attribute specifies the CUG index which is to be signalled in PVC call requests to the remote end. The type of CUG signalli… |
| 1.3.6.1.4.1.562.2.4.1.5130.3.10.1.14 | vctDcCugType | 0 | 0 | This attribute specifies the type of CUG signalling to be used in PVC call request. Index of CUG to be used is defined in attrib… |