This attribute contains the user data, if present. userData is a 0 to 16
length string which is appended to the call request packet that is
presented to the called (destination) DTE.
User data can be a 0 to 128 byte string for fast select calls;
otherwise it is 0 to 16 byte string.
Fast select calls are indicated as such using the X.25 ITU-T facility
for 'Reverse Charging'.
The length of the user data attribute is not verified during service
provisioning. If more than 16 bytes of user data is specified on a
call without the fast select option, then the call is cleared with a
clear cause of 'local procedure error', and a diagnostic code of 39
(as defined in the ITU-T X.25 Recommendation).
Parsed from file nortelPP-vcTesterV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-VcTesterMIB
This attribute contains the user data, if present. userData is a 0 to 16
length string which is appended to the call request packet that is
presented to the called (destination) DTE.
User data can be a 0 to 128 byte string for fast select calls;
otherwise it is 0 to 16 byte string.
Fast select calls are indicated as such using the X.25 ITU-T facility
for 'Reverse Charging'.
The length of the user data attribute is not verified during service
provisioning. If more than 16 bytes of user data is specified on a
call without the fast select option, then the call is cleared with a
clear cause of 'local procedure error', and a diagnostic code of 39
(as defined in the ITU-T X.25 Recommendation).
Parsed from file Nortel-Magellan-Passport-VcTesterMIB.mib
Module: Nortel-Magellan-Passport-VcTesterMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-VcTesterMIB
[Automatically extracted from oidview.com]
vctDcUserData OBJECT-TYPE SYNTAX HexString (SIZE (0..128)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute contains the user data, if present. userData is a 0 to 16 length string which is appended to the call request packet that is presented to the called (destination) DTE. User data can be a 0 to 128 byte string for fast select calls; otherwise it is 0 to 16 byte string. Fast select calls are indicated as such using the X.25 ITU-T facility for 'Reverse Charging'. The length of the user data attribute is not verified during service provisioning. If more than 16 bytes of user data is specified on a call without the fast select option, then the call is cleared with a clear cause of 'local procedure error', and a diagnostic code of 39 (as defined in the ITU-T X.25 Recommendation)." ::= { vctDcOptionsEntry 8 }
vctDcUserData OBJECT-TYPE SYNTAX HexString (SIZE (0..128)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute contains the user data, if present. userData is a 0 to 16 length string which is appended to the call request packet that is presented to the called (destination) DTE. User data can be a 0 to 128 byte string for fast select calls; otherwise it is 0 to 16 byte string. Fast select calls are indicated as such using the X.25 ITU-T facility for 'Reverse Charging'. The length of the user data attribute is not verified during service provisioning. If more than 16 bytes of user data is specified on a call without the fast select option, then the call is cleared with a clear cause of 'local procedure error', and a diagnostic code of 39 (as defined in the ITU-T X.25 Recommendation)." ::= { vctDcOptionsEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.5130.3.10.1.1 | vctDcLocalNpi | 0 | 0 | This attribute specifies the Numbering Plan Indicator (NPI) of the localDna. |
| 1.3.6.1.4.1.562.2.4.1.5130.3.10.1.2 | vctDcLocalDna | 0 | 0 | This attribute specifies the Data Network Address (Dna) of the local DTE. This address is used in formatting of call request to r… |
| 1.3.6.1.4.1.562.2.4.1.5130.3.10.1.3 | vctDcRemoteNpi | 0 | 0 | Remote numbering Plan Indicator (Npi) indicates the numbering plan used in the remoteDna. |
| 1.3.6.1.4.1.562.2.4.1.5130.3.10.1.4 | vctDcRemoteDna | 0 | 0 | This attribute specifies the Data Network Address (Dna) of the remote. This is the called (destination) DTE address (Dna) to whi… |
| 1.3.6.1.4.1.562.2.4.1.5130.3.10.1.5 | vctDcRemoteLcn | 0 | 0 | This attribute provides the remote LCN (Logical Channel Number) - it is used only for PVCs, where attribute type is set to perman… |
| 1.3.6.1.4.1.562.2.4.1.5130.3.10.1.6 | vctDcType | 0 | 0 | This attribute specifies the type of Vc call: switched, permanentMaster, permanentSlave, permanentSlaveWithBackup, permanentBackupSl… |
| 1.3.6.1.4.1.562.2.4.1.5130.3.10.1.7 | vctDcSvcAutoCallRetry | 0 | 0 | svcAutoCallRetry is used only for switched calls, in which case the attribute type is set to switched. Otherwise, this attribute… |
| 1.3.6.1.4.1.562.2.4.1.5130.3.10.1.10 | vctDcDiscardPriority | 0 | 0 | This attribute specifies the discard priority for outgoing call using this DLCI. The discard priority has three provisioning val… |
| 1.3.6.1.4.1.562.2.4.1.5130.3.10.1.11 | vctDcDataPath | 0 | 0 | This attribute specifies the data path to be used by Virtual Circuits on this interface. The value of the dataPath attribute in … |
| 1.3.6.1.4.1.562.2.4.1.5130.3.10.1.13 | vctDcCugIndex | 0 | 0 | This attribute specifies the CUG index which is to be signalled in PVC call requests to the remote end. The type of CUG signalli… |
| 1.3.6.1.4.1.562.2.4.1.5130.3.10.1.14 | vctDcCugType | 0 | 0 | This attribute specifies the type of CUG signalling to be used in PVC call request. Index of CUG to be used is defined in attrib… |