This attribute specifies the maximum number of Vpts that can be
activated on this AtmIf.
If the AtmIf is linked to a LogicalProcessor of cardType other than
3pE3Atm, 3pDS3Atm, 3pOC3MmAtm, 3pOC3SmAtm, 3pE1Atm,
3pDS1Atm, 2pJ6MAtm, the sum of (maxVccs + maxVpcs +
(maxVpts * 3) + 1) across all spared AtmIfs linked to that Lp must
not exceed the protectedConnectionPoolCapacity attribute of the
Arc component. The sum of (maxVccs + maxVpcs + (maxVpts * 3)
+ 1) across all unspared AtmIfs linked to that Lp must not exceed
connectionPoolCapacity attribute of the Arc component. Note that 3
connections are used for every standard Vpt and 2 for each basic
Vpt. If the Arc component doesn't exist, the default value of the Arc
connectionPoolCapacity and protectedConnectionPoolCapacity
attribute is used as the limit.
If this attribute is set to autoConfigure, then on 32 port Multi-
Service Access cards its value is configured as 16, and on all other
cards it is 128.
VALUES (
65535 = autoConfigure
)
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies the maximum number of Vpts that can be
activated on this AtmIf.
If the AtmIf is linked to a LogicalProcessor of cardType other than
3pE3Atm, 3pDS3Atm, 3pOC3MmAtm, 3pOC3SmAtm, 3pE1Atm,
3pDS1Atm, 2pJ6MAtm, the sum of (maxVccs + maxVpcs +
(maxVpts * 3) + 1) across all spared AtmIfs linked to that Lp must
not exceed the protectedConnectionPoolCapacity attribute of the
Arc component. The sum of (maxVccs + maxVpcs + (maxVpts * 3)
+ 1) across all unspared AtmIfs linked to that Lp must not exceed
connectionPoolCapacity attribute of the Arc component. Note that 3
connections are used for every standard Vpt and 2 for each basic
Vpt. If the Arc component doesn't exist, the default value of the Arc
connectionPoolCapacity and protectedConnectionPoolCapacity
attribute is used as the limit.
If this attribute is set to autoConfigure, then on 32 port Multi-
Service Access cards its value is configured as 16, and on all other
cards it is 128.
VALUES (
65535 = autoConfigure
)
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfCAMaxCaVpts OBJECT-TYPE SYNTAX Unsigned32 (0..4096 | 65535) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum number of Vpts that can be activated on this AtmIf. If the AtmIf is linked to a LogicalProcessor of cardType other than 3pE3Atm, 3pDS3Atm, 3pOC3MmAtm, 3pOC3SmAtm, 3pE1Atm, 3pDS1Atm, 2pJ6MAtm, the sum of (maxVccs + maxVpcs + (maxVpts * 3) + 1) across all spared AtmIfs linked to that Lp must not exceed the protectedConnectionPoolCapacity attribute of the Arc component. The sum of (maxVccs + maxVpcs + (maxVpts * 3) + 1) across all unspared AtmIfs linked to that Lp must not exceed connectionPoolCapacity attribute of the Arc component. Note that 3 connections are used for every standard Vpt and 2 for each basic Vpt. If the Arc component doesn't exist, the default value of the Arc connectionPoolCapacity and protectedConnectionPoolCapacity attribute is used as the limit. If this attribute is set to autoConfigure, then on 32 port Multi- Service Access cards its value is configured as 16, and on all other cards it is 128. VALUES ( 65535 = autoConfigure )" DEFVAL { 65535 } ::= { mscAtmIfCAProvEntry 106 }
mscAtmIfCAMaxCaVpts OBJECT-TYPE SYNTAX Unsigned32 (0..4096 | 65535) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum number of Vpts that can be activated on this AtmIf. If the AtmIf is linked to a LogicalProcessor of cardType other than 3pE3Atm, 3pDS3Atm, 3pOC3MmAtm, 3pOC3SmAtm, 3pE1Atm, 3pDS1Atm, 2pJ6MAtm, the sum of (maxVccs + maxVpcs + (maxVpts * 3) + 1) across all spared AtmIfs linked to that Lp must not exceed the protectedConnectionPoolCapacity attribute of the Arc component. The sum of (maxVccs + maxVpcs + (maxVpts * 3) + 1) across all unspared AtmIfs linked to that Lp must not exceed connectionPoolCapacity attribute of the Arc component. Note that 3 connections are used for every standard Vpt and 2 for each basic Vpt. If the Arc component doesn't exist, the default value of the Arc connectionPoolCapacity and protectedConnectionPoolCapacity attribute is used as the limit. If this attribute is set to autoConfigure, then on 32 port Multi- Service Access cards its value is configured as 16, and on all other cards it is 128. VALUES ( 65535 = autoConfigure )" DEFVAL { 65535 } ::= { mscAtmIfCAProvEntry 106 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.5 | mscAtmIfCAMaxVpcs | 0 | 0 | This attribute specifies the maximum number of Vpcs that can be activated on this AtmIf. If the AtmIf is linked to a LogicalProc… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.6 | mscAtmIfCAMaxVccs | 0 | 0 | This attribute specifies the maximum number of usable Vccs (and Vpt Vccs) that can be configured on this AtmIf. The value must n… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.7 | mscAtmIfCAMinMulticastBranches | 0 | 0 | This attribute specifies the guaranteed number of switched multicast branches that can be activated on this AtmIf, including tho… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.8 | mscAtmIfCAMaxMulticastBranches | 0 | 0 | This attribute specifies the maximum number of provisionable multicast branches that can be activated on this AtmIf, including th… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.9 | mscAtmIfCAMaxVpts | 0 | 0 | This attribute specifies the maximum number of Vpts that can be activated on this AtmIf. If the AtmIf is linked to a LogicalProc… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.10 | mscAtmIfCAMinAutoSelectedVci | 0 | 0 | This attribute specifies the default lower boundary for VCIs which are automatically allocated for a switched Vcc. A VCI number … |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.15 | mscAtmIfCAMinAutoSelectedVciForVpiZero | 0 | 0 | This attribute specifies the minimum VCI value which is automatically allocated for a switched Vcc with VPI value of zero. A VCI … |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.20 | mscAtmIfCAMinAutoSelectedVciForNonZeroVpi | 0 | 0 | This attribute specifies the minimum VCI value which is automatically allocated for a switched Vcc with a non-zero VPI value. A V… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.25 | mscAtmIfCAPermittedSvcAtmServiceCategories | 0 | 0 | This attribute specifies which ATM service categories are permitted on this interface for SVCs. The value of this attribute does… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.30 | mscAtmIfCACbrPool | 0 | 0 | This attribute has been obsoleted and migrated under the Cbr subcomponent. In addition, notApplicable is no longer a valid value… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.40 | mscAtmIfCACbrCdvt | 0 | 0 | This attribute has been obsoleted and migrated under the Cbr subcomponent. This attribute specifies the cell delay variation tole… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.50 | mscAtmIfCACbrCellLossRatio | 0 | 0 | This attribute has been obsoleted and migrated under the Cbr subcomponent. In addition, the type and range of the new attribute h… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.51 | mscAtmIfCASvcCbrHoldingPriority | 0 | 0 | This attribute has been obsoleted and migrated under the Cbr subcomponent. This attribute specifies the default holding priority … |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.52 | mscAtmIfCASvcVbrRtHoldingPriority | 0 | 0 | This attribute has been obsoleted and migrated under the RtVbr subcomponent. This attribute specifies the default holding priorit… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.53 | mscAtmIfCASvcVbrNrtHoldingPriority | 0 | 0 | This attribute has been obsoleted and migrated under the NrtVbr subcomponent. This attribute specifies the default holding priori… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.60 | mscAtmIfCAVbrRtPool | 0 | 0 | This attribute has been obsoleted and migrated under the RtVbr subcomponent. In addition, notApplicable is no longer a valid val… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.70 | mscAtmIfCAVbrRtCdvt | 0 | 0 | This attribute has been obsoleted and migrated under the RtVbr subcomponent. This attribute specifies the cell delay variation to… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.80 | mscAtmIfCAVbrRtCellLossRatio | 0 | 0 | This attribute has been obsoleted and migrated under the RtVbr subcomponent. In addition, the type and range of this attribute h… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.90 | mscAtmIfCAVbrNrtPool | 0 | 0 | This attribute has been obsoleted and migrated under the NrtVbr subcomponent. In addition, notApplicable is no longer a valid va… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.100 | mscAtmIfCAVbrNrtCdvt | 0 | 0 | This attribute has been obsoleted and migrated under the NrtVbr subcomponent. This attribute specifies the cell delay variation t… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.105 | mscAtmIfCAMaxCaVpcs | 0 | 0 | This attribute specifies the maximum number of Vpcs that can be activated on this AtmIf. If the AtmIf is linked to a LogicalProc… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.110 | mscAtmIfCAVbrNrtCellLossRatio | 0 | 0 | This attribute has been obsoleted and migrated under the NrtVbr subcomponent. In addition, the type and range of new attribute h… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.120 | mscAtmIfCAUbrMaxConnections | 0 | 0 | This attribute is obsolete in P6.0, and has been migrated to the CA Ubr/0 maxVccs and maxVpcs attributes. This attribute specifi… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.121 | mscAtmIfCAMinAutoSelectedVpi | 0 | 0 | This attribute specifies the minimum VPI value which will be automatically allocated for a switched Vpc. A VPI number is automati… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.122 | mscAtmIfCAPermittedAtmServiceCategories | 0 | 0 | This attribute specifies which ATM service categories are permitted on this interface for SVPs and SVCs. The value of this attri… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.125 | mscAtmIfCAMaxAutoSelectedVpi | 0 | 0 | This attribute specifies the maximumVPI value which will be automatically allocated for a switched Vpc or Vcc. A VPI number is au… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.126 | mscAtmIfCAMaxAutoSelectedVciForVpiZero | 0 | 0 | This attribute specifies the maximum VCI value which is automatically allocated for a switched Vcc. A VCI number is automatically… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.127 | mscAtmIfCAMaxAutoSelectedVciForNonZeroVpi | 0 | 0 | This attribute specifies the maximum VCI value which is automatically allocated for a switched Vcc. A VCI number is automatically… |