This attribute specifies the guaranteed number of switched multicast
branches that can be activated on this AtmIf, including those
activated beneath a Vpt.
The sum of minMulticastBranches and the number of provisioned
branches listed in the nextHop attribute of all Mnrps across all
spared AtmIfs linked to that Lp must not exceed the
protectedMcstBranchesCapacity attribute of the Arc component.
The sum of minMulticastBranches and the number of provisioned
branches listed in the nextHop attribute of all Mnrps across all
unspared AtmIfs linked to that Lp must not exceed
multicastBranchesCapacity attribute of the Arc component.
For CQC-based ATM cards, the value of the attribute can not
exceed 10752.
If this value is non zero, the Arc component must exist and have
multicastBranchesCapacity set to a value greater than or equal to
this attribute.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies the guaranteed number of switched multicast
branches that can be activated on this AtmIf, including those
activated beneath a Vpt.
The sum of minMulticastBranches and the number of provisioned
branches listed in the nextHop attribute of all Mnrps across all
spared AtmIfs linked to that Lp must not exceed the
protectedMcstBranchesCapacity attribute of the Arc component.
The sum of minMulticastBranches and the number of provisioned
branches listed in the nextHop attribute of all Mnrps across all
unspared AtmIfs linked to that Lp must not exceed
multicastBranchesCapacity attribute of the Arc component.
For CQC-based ATM cards, the value of the attribute can not
exceed 10752.
If this value is non zero, the Arc component must exist and have
multicastBranchesCapacity set to a value greater than or equal to
this attribute.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfCAMinMulticastBranches OBJECT-TYPE SYNTAX Unsigned32 (0..16384) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the guaranteed number of switched multicast branches that can be activated on this AtmIf, including those activated beneath a Vpt. The sum of minMulticastBranches and the number of provisioned branches listed in the nextHop attribute of all Mnrps across all spared AtmIfs linked to that Lp must not exceed the protectedMcstBranchesCapacity attribute of the Arc component. The sum of minMulticastBranches and the number of provisioned branches listed in the nextHop attribute of all Mnrps across all unspared AtmIfs linked to that Lp must not exceed multicastBranchesCapacity attribute of the Arc component. For CQC-based ATM cards, the value of the attribute can not exceed 10752. If this value is non zero, the Arc component must exist and have multicastBranchesCapacity set to a value greater than or equal to this attribute." DEFVAL { 0 } ::= { mscAtmIfCAProvEntry 7 }
mscAtmIfCAMinMulticastBranches OBJECT-TYPE SYNTAX Unsigned32 (0..16384) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the guaranteed number of switched multicast branches that can be activated on this AtmIf, including those activated beneath a Vpt. The sum of minMulticastBranches and the number of provisioned branches listed in the nextHop attribute of all Mnrps across all spared AtmIfs linked to that Lp must not exceed the protectedMcstBranchesCapacity attribute of the Arc component. The sum of minMulticastBranches and the number of provisioned branches listed in the nextHop attribute of all Mnrps across all unspared AtmIfs linked to that Lp must not exceed multicastBranchesCapacity attribute of the Arc component. For CQC-based ATM cards, the value of the attribute can not exceed 10752. If this value is non zero, the Arc component must exist and have multicastBranchesCapacity set to a value greater than or equal to this attribute." DEFVAL { 0 } ::= { mscAtmIfCAProvEntry 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.5 | mscAtmIfCAMaxVpcs | 0 | 0 | This attribute specifies the maximum number of Vpcs that can be activated on this AtmIf. If the AtmIf is linked to a LogicalProc… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.6 | mscAtmIfCAMaxVccs | 0 | 0 | This attribute specifies the maximum number of usable Vccs (and Vpt Vccs) that can be configured on this AtmIf. The value must n… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.8 | mscAtmIfCAMaxMulticastBranches | 0 | 0 | This attribute specifies the maximum number of provisionable multicast branches that can be activated on this AtmIf, including th… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.9 | mscAtmIfCAMaxVpts | 0 | 0 | This attribute specifies the maximum number of Vpts that can be activated on this AtmIf. If the AtmIf is linked to a LogicalProc… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.10 | mscAtmIfCAMinAutoSelectedVci | 0 | 0 | This attribute specifies the default lower boundary for VCIs which are automatically allocated for a switched Vcc. A VCI number … |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.15 | mscAtmIfCAMinAutoSelectedVciForVpiZero | 0 | 0 | This attribute specifies the minimum VCI value which is automatically allocated for a switched Vcc with VPI value of zero. A VCI … |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.20 | mscAtmIfCAMinAutoSelectedVciForNonZeroVpi | 0 | 0 | This attribute specifies the minimum VCI value which is automatically allocated for a switched Vcc with a non-zero VPI value. A V… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.25 | mscAtmIfCAPermittedSvcAtmServiceCategories | 0 | 0 | This attribute specifies which ATM service categories are permitted on this interface for SVCs. The value of this attribute does… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.30 | mscAtmIfCACbrPool | 0 | 0 | This attribute has been obsoleted and migrated under the Cbr subcomponent. In addition, notApplicable is no longer a valid value… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.40 | mscAtmIfCACbrCdvt | 0 | 0 | This attribute has been obsoleted and migrated under the Cbr subcomponent. This attribute specifies the cell delay variation tole… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.50 | mscAtmIfCACbrCellLossRatio | 0 | 0 | This attribute has been obsoleted and migrated under the Cbr subcomponent. In addition, the type and range of the new attribute h… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.51 | mscAtmIfCASvcCbrHoldingPriority | 0 | 0 | This attribute has been obsoleted and migrated under the Cbr subcomponent. This attribute specifies the default holding priority … |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.52 | mscAtmIfCASvcVbrRtHoldingPriority | 0 | 0 | This attribute has been obsoleted and migrated under the RtVbr subcomponent. This attribute specifies the default holding priorit… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.53 | mscAtmIfCASvcVbrNrtHoldingPriority | 0 | 0 | This attribute has been obsoleted and migrated under the NrtVbr subcomponent. This attribute specifies the default holding priori… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.60 | mscAtmIfCAVbrRtPool | 0 | 0 | This attribute has been obsoleted and migrated under the RtVbr subcomponent. In addition, notApplicable is no longer a valid val… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.70 | mscAtmIfCAVbrRtCdvt | 0 | 0 | This attribute has been obsoleted and migrated under the RtVbr subcomponent. This attribute specifies the cell delay variation to… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.80 | mscAtmIfCAVbrRtCellLossRatio | 0 | 0 | This attribute has been obsoleted and migrated under the RtVbr subcomponent. In addition, the type and range of this attribute h… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.90 | mscAtmIfCAVbrNrtPool | 0 | 0 | This attribute has been obsoleted and migrated under the NrtVbr subcomponent. In addition, notApplicable is no longer a valid va… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.100 | mscAtmIfCAVbrNrtCdvt | 0 | 0 | This attribute has been obsoleted and migrated under the NrtVbr subcomponent. This attribute specifies the cell delay variation t… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.105 | mscAtmIfCAMaxCaVpcs | 0 | 0 | This attribute specifies the maximum number of Vpcs that can be activated on this AtmIf. If the AtmIf is linked to a LogicalProc… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.106 | mscAtmIfCAMaxCaVpts | 0 | 0 | This attribute specifies the maximum number of Vpts that can be activated on this AtmIf. If the AtmIf is linked to a LogicalProc… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.110 | mscAtmIfCAVbrNrtCellLossRatio | 0 | 0 | This attribute has been obsoleted and migrated under the NrtVbr subcomponent. In addition, the type and range of new attribute h… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.120 | mscAtmIfCAUbrMaxConnections | 0 | 0 | This attribute is obsolete in P6.0, and has been migrated to the CA Ubr/0 maxVccs and maxVpcs attributes. This attribute specifi… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.121 | mscAtmIfCAMinAutoSelectedVpi | 0 | 0 | This attribute specifies the minimum VPI value which will be automatically allocated for a switched Vpc. A VPI number is automati… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.122 | mscAtmIfCAPermittedAtmServiceCategories | 0 | 0 | This attribute specifies which ATM service categories are permitted on this interface for SVPs and SVCs. The value of this attri… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.125 | mscAtmIfCAMaxAutoSelectedVpi | 0 | 0 | This attribute specifies the maximumVPI value which will be automatically allocated for a switched Vpc or Vcc. A VPI number is au… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.126 | mscAtmIfCAMaxAutoSelectedVciForVpiZero | 0 | 0 | This attribute specifies the maximum VCI value which is automatically allocated for a switched Vcc. A VCI number is automatically… |
| 1.3.6.1.4.1.562.36.2.1.114.3.100.1.127 | mscAtmIfCAMaxAutoSelectedVciForNonZeroVpi | 0 | 0 | This attribute specifies the maximum VCI value which is automatically allocated for a switched Vcc. A VCI number is automatically… |