An entry in the mscBtdsPlcProvTable.
Parsed from file nortelPC-bitTransparentV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-BitTransparentMIB
An entry in the mscBtdsPlcProvTable.
Parsed from file Nortel-MsCarrier-MscPassport-BitTransparentMIB.mib
Module: Nortel-MsCarrier-MscPassport-BitTransparentMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-BitTransparentMIB
[Automatically extracted from oidview.com]
mscBtdsPlcProvEntry OBJECT-TYPE SYNTAX MscBtdsPlcProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscBtdsPlcProvTable." INDEX { mscBtdsIndex, mscBtdsPlcIndex } ::= { mscBtdsPlcProvTable 1 }
mscBtdsPlcProvEntry OBJECT-TYPE SYNTAX MscBtdsPlcProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscBtdsPlcProvTable." INDEX { mscBtdsIndex, mscBtdsPlcIndex } ::= { mscBtdsPlcProvTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.2 | mscBtdsPlcRemoteName | 0 | 0 | This attribute is the PLC's remote end point's address in the format of a Passport component name. The syntax of a component is:… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.3 | mscBtdsPlcSetupPriority | 0 | 0 | This attribute gives the priority at which a path is established. Zero is the highest priority and four is the lowest. When PORS… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.4 | mscBtdsPlcHoldingPriority | 0 | 0 | This attribute gives the priority that a path holds once it is established. Zero(0) is the highest priority and four(4) is the l… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.5 | mscBtdsPlcRequiredTxBandwidth | 0 | 0 | This attribute gives the bandwidth (in bits per second) reserved by a path on each of the trunks of its route. This attribute re… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.6 | mscBtdsPlcRequiredRxBandwidth | 0 | 0 | This attribute gives the bandwidth (in bits per second) reserved by a path on each of trunks of its route. This attribute repres… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.7 | mscBtdsPlcRequiredTrafficType | 0 | 0 | This attribute indicates the type of traffic transmitted over the path. There are eight(8) possible traffic types, and the path … |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.8 | mscBtdsPlcPermittedTrunkTypes | 0 | 0 | This attribute lists up to eight(8) types of trunk that can be used on the route. The terrestrial and satellite trunk types have… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.9 | mscBtdsPlcRequiredSecurity | 0 | 0 | This attribute indicates the required minimum level of security of the trunks on the route. Zero represents the most secure and … |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.10 | mscBtdsPlcRequiredCustomerParm | 0 | 0 | This attribute indicates the allowed customer defined parameter of the trunks on the route. Its value, a number from zero to sev… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.11 | mscBtdsPlcPathAttributeToMinimize | 0 | 0 | This attribute indicates whether a route is selected on the basis of minimizing the cost or the delay. Each trunk has a cost and… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.12 | mscBtdsPlcMaximumAcceptableCost | 0 | 0 | This attribute indicates an upper bound on the cost metric of a route, which is the sum of the cost metrics of all trunks on the… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.13 | mscBtdsPlcMaximumAcceptableDelay | 0 | 0 | This attribute indicates an upper bound on the delay of a route, which is the sum of the delay of all trunks on the route. It sh… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.14 | mscBtdsPlcEmissionPriority | 0 | 0 | This attribute indicates the urgency with which packets on the path are emitted by the trunks on the route. EmissionPriority of … |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.15 | mscBtdsPlcDiscardPriority | 0 | 0 | This attribute indicates the importance of the packets on the path. One is used for paths carrying the most important traffic, a… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.16 | mscBtdsPlcPathType | 0 | 0 | mscBtdsPlcPathtype |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.17 | mscBtdsPlcPathFailureAction | 0 | 0 | This attribute is used to specify whether the application can tolerate momentary interruption of a path while a new path is sele… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.18 | mscBtdsPlcBumpPreference | 0 | 0 | This attribute controls when bumping occurs in the route selection process. A connection with higher (numerically less) setupPri… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.19 | mscBtdsPlcOptimization | 0 | 0 | This attribute is used to specify whether this connection should attempt to optimize its path when requested by the routing PORS… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.20 | mscBtdsPlcAddressToCall | 0 | 0 | This attribute is the PLC's remote end point's address in the format of a NSAP address. As such it must consist of a string of h… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.21 | mscBtdsPlcLocalAddress | 0 | 0 | This attribute is the PLC's end point address in the format of an NSAP address. As such it must consist of a string of hex digit… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.22 | mscBtdsPlcMaximumAcceptableGatewayCost | 0 | 0 | This attribute indicates an upper bound on the gateway cost metric of a route, which is the sum of the gateway cost metrics of a… |