This attribute lists up to eight(8) types of trunk that can be used on
the route. The terrestrial and satellite trunk types have been
defined, leaving six(6) remaining arbitrary types that can be defined
by the network administration. The trunk's type is indicated in the
trunkType attribute of the Trunk component. When selecting a
route, PORS only chooses trunks whose trunkType are in the
permittedTrunkTypes for the path.
Description of bits:
terrestrial(0)
satellite(1)
trunkType1(2)
trunkType2(3)
trunkType3(4)
trunkType4(5)
trunkType5(6)
trunkType6(7)
Parsed from file nortelPC-bitTransparentV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-BitTransparentMIB
This attribute lists up to eight(8) types of trunk that can be used on
the route. The terrestrial and satellite trunk types have been
defined, leaving six(6) remaining arbitrary types that can be defined
by the network administration. The trunk's type is indicated in the
trunkType attribute of the Trunk component. When selecting a
route, PORS only chooses trunks whose trunkType are in the
permittedTrunkTypes for the path.
Description of bits:
terrestrial(0)
satellite(1)
trunkType1(2)
trunkType2(3)
trunkType3(4)
trunkType4(5)
trunkType5(6)
trunkType6(7)
Parsed from file Nortel-MsCarrier-MscPassport-BitTransparentMIB.mib
Module: Nortel-MsCarrier-MscPassport-BitTransparentMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-BitTransparentMIB
[Automatically extracted from oidview.com]
mscBtdsPlcPermittedTrunkTypes OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute lists up to eight(8) types of trunk that can be used on the route. The terrestrial and satellite trunk types have been defined, leaving six(6) remaining arbitrary types that can be defined by the network administration. The trunk's type is indicated in the trunkType attribute of the Trunk component. When selecting a route, PORS only chooses trunks whose trunkType are in the permittedTrunkTypes for the path. Description of bits: terrestrial(0) satellite(1) trunkType1(2) trunkType2(3) trunkType3(4) trunkType4(5) trunkType5(6) trunkType6(7)" DEFVAL { 'f8'H } ::= { mscBtdsPlcProvEntry 8 }
mscBtdsPlcPermittedTrunkTypes OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute lists up to eight(8) types of trunk that can be used on the route. The terrestrial and satellite trunk types have been defined, leaving six(6) remaining arbitrary types that can be defined by the network administration. The trunk's type is indicated in the trunkType attribute of the Trunk component. When selecting a route, PORS only chooses trunks whose trunkType are in the permittedTrunkTypes for the path. Description of bits: terrestrial(0) satellite(1) trunkType1(2) trunkType2(3) trunkType3(4) trunkType4(5) trunkType5(6) trunkType6(7)" DEFVAL { 'f8'H } ::= { mscBtdsPlcProvEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.2 | mscBtdsPlcRemoteName | 0 | 0 | This attribute is the PLC's remote end point's address in the format of a Passport component name. The syntax of a component is:… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.3 | mscBtdsPlcSetupPriority | 0 | 0 | This attribute gives the priority at which a path is established. Zero is the highest priority and four is the lowest. When PORS… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.4 | mscBtdsPlcHoldingPriority | 0 | 0 | This attribute gives the priority that a path holds once it is established. Zero(0) is the highest priority and four(4) is the l… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.5 | mscBtdsPlcRequiredTxBandwidth | 0 | 0 | This attribute gives the bandwidth (in bits per second) reserved by a path on each of the trunks of its route. This attribute re… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.6 | mscBtdsPlcRequiredRxBandwidth | 0 | 0 | This attribute gives the bandwidth (in bits per second) reserved by a path on each of trunks of its route. This attribute repres… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.7 | mscBtdsPlcRequiredTrafficType | 0 | 0 | This attribute indicates the type of traffic transmitted over the path. There are eight(8) possible traffic types, and the path … |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.9 | mscBtdsPlcRequiredSecurity | 0 | 0 | This attribute indicates the required minimum level of security of the trunks on the route. Zero represents the most secure and … |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.10 | mscBtdsPlcRequiredCustomerParm | 0 | 0 | This attribute indicates the allowed customer defined parameter of the trunks on the route. Its value, a number from zero to sev… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.11 | mscBtdsPlcPathAttributeToMinimize | 0 | 0 | This attribute indicates whether a route is selected on the basis of minimizing the cost or the delay. Each trunk has a cost and… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.12 | mscBtdsPlcMaximumAcceptableCost | 0 | 0 | This attribute indicates an upper bound on the cost metric of a route, which is the sum of the cost metrics of all trunks on the… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.13 | mscBtdsPlcMaximumAcceptableDelay | 0 | 0 | This attribute indicates an upper bound on the delay of a route, which is the sum of the delay of all trunks on the route. It sh… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.14 | mscBtdsPlcEmissionPriority | 0 | 0 | This attribute indicates the urgency with which packets on the path are emitted by the trunks on the route. EmissionPriority of … |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.15 | mscBtdsPlcDiscardPriority | 0 | 0 | This attribute indicates the importance of the packets on the path. One is used for paths carrying the most important traffic, a… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.16 | mscBtdsPlcPathType | 0 | 0 | mscBtdsPlcPathtype |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.17 | mscBtdsPlcPathFailureAction | 0 | 0 | This attribute is used to specify whether the application can tolerate momentary interruption of a path while a new path is sele… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.18 | mscBtdsPlcBumpPreference | 0 | 0 | This attribute controls when bumping occurs in the route selection process. A connection with higher (numerically less) setupPri… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.19 | mscBtdsPlcOptimization | 0 | 0 | This attribute is used to specify whether this connection should attempt to optimize its path when requested by the routing PORS… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.20 | mscBtdsPlcAddressToCall | 0 | 0 | This attribute is the PLC's remote end point's address in the format of a NSAP address. As such it must consist of a string of h… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.21 | mscBtdsPlcLocalAddress | 0 | 0 | This attribute is the PLC's end point address in the format of an NSAP address. As such it must consist of a string of hex digit… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.22 | mscBtdsPlcMaximumAcceptableGatewayCost | 0 | 0 | This attribute indicates an upper bound on the gateway cost metric of a route, which is the sum of the gateway cost metrics of a… |